![](https://www.sixonetwo.co.uk/ebay-panels/eBay-item-details.jpg)
WB/C17D28
Description- BIMECC 20 x Silver Tapered Wheel Bolts
- Thread Size: M14 x 1.50
- Length: 28mm
- Seat Type: Tapered (Cone Shaped)
- 17mm Hex
- Suitable for both steel and alloy wheels these bolts will fit aftermarket wheels
- Please not that Ebay compatibility is for guidance only. Any questions then please contact us.
- 20 x Silver 14 x 1.50 28mm Long 17mm Hex Bolts.
The Hex refers to the size of the nut / bolt head and therefore the corresponding size of the socket used with the wheel brace.
The seat is the part of the nut/bolt that comes into contact with the wheel in the bolt holes.
There are 3 main styles of seat
Tapered - usually 60 degrees, this looks like a cone.
Radius - this looks like a bowl.
Flat - this is usually a flat washer.
To be on the safe side, always check beforehand that these will fit your vehicle to save on having to return purchases.
![](https://www.sixonetwo.co.uk/ebay-panels/eBay-delivery.jpg)
For deliveries outside the UK please provide us with your preferred delivery address for a freight quote. We can cater for either express or economy deliveries overseas. Our experience is that Europe by road is the most cost effective way to send.
PLEASE NOTE THAT WE CANNOT BE HELD RESPONSIBLE FOR DELAYS IN DELIVERIES THAT ARE BEYOND OUR CONTROL - EG MAIL STRIKES OR DISPUTES. If you are experiencing a delay in receiving your goods, then please contact us first before leaving a negative feedback. We will do our utmost to track your order for you. Like you, we are only human and want the best Ebay experience possible. Please help us to help you achieve this. We are nice guys and are here to help!
![](https://www.sixonetwo.co.uk/ebay-panels/eBay-returns.jpg)
Items bought in error may be returned by giving us prior notice of their arrival and returned with invoice details.
Items returned in these circumstances must be returned at the buyers cost, in their original condition and unused in the original, undamaged packaging and may be subject to a re-stocking fee.
Any damages or defects must be notified to the seller within 24 hours of delivery to enable us to take appropriate action and tyres must not have been fitted to wheels. Wheels may not be returned once tyres have been fitted.
![](https://www.sixonetwo.co.uk/ebay-panels/eBay-faq.jpg)
This section is designed to help you understand what jobs our products do. Remember you can always call us on 08444 721 612 for any advice. We're on hand to help..
SPACERS
When fitting Spacers to your car, you'll need to
extend the length of the bolt from the standard length to: standard length +
spacer width. For example if your car takes a standard 28mm bolt and you use a
20mm spacer, you'll need to bolt the spacers on with 48mm long bolts. Common
sense right!
SPIGOT RINGS
To establish what rings you need, please contact us with the centre bore measurement from the back of the wheel.
This needs to be an accurate measurement with a digital
gauge. We'll happily do this for you if you bring a wheel to us. If you're
confident you can establish this measurement yourself, please call it into us
(or email) with the make and model of your car, and we'll check for the correct
rings. If the bore is very close to the hub size of your car, then it may be
that rings are not available. In this case it's often possible for the wheel
bores to be precision machined to a larger size (at additional cost) for which
there are rings available. If you're in any doubt, give our experts a call.
WHEEL LOCKS
TPi locks are made to fit both your vehicle and your
wheels. Things you need to check are: that you're buying the correct thread
diameter and pitch for your car, AND matching this measurement with the seating
type your wheels have. For example: tapered (cone shaped), radius (ball shaped)
or mag seat (flat seated) If you've changed your wheels from the standard
factory ones, then there's every possibility the nuts or bolts will need to be
different - and the same applies to the locks.
The diagrams to the right should help to explain the difference.
POLARISED NUTS & BOLTS
TPi Race nuts and bolts are available in tapered
fitment only. Please check below for the correct fitment for your car.
Don't use the wrong seating type for your wheels.
Don't take chances with your safety. Race nuts are sold in clam shell packs of
4. You just need to buy the correct amount of packs for your car. These must be
tightened with a bar and not by a nut gun, which will damage the finish.
SD TUNER NUTS & BOLTS
You need these if your car requires nuts, and the
bolt pockets on your wheels are too small for a standard socket. The same
applies if your car requires bolts, and the bolt pockets on your wheels are too
small for a standard socket.
WHEEL BOLTS
TPi bolts are made to fit both your vehicle and your
wheels. Things you need to check are: that you're buying the correct thread
diameter, thread length and pitch for your car, AND matching this measurement
with the seating type your wheels have. For example: tapered (cone shaped),
radius(ball shaped) or mag seat (flat seated) If you've changed your wheels
from the standard factory ones, then there's every possibility the bolts will
need to be different - and the same applies to the locks. The diagrams to the right should help to
explain the difference. If your bolt pockets are smaller than standard and too
small to accept a standard socket, then you’ll need our spline tuner bolts.
If you're in any doubt, give our experts a call. We can guide you towards to correct fitments for your car and wheels.
WHEEL NUTS
TPi nuts and locks are made to fit both your vehicle
and your wheels. Things you need to check are: that you're buying the correct
thread diameter and pitch for your car. Also that your wheels have tapered
seated (cone shaped) bolt pockets. Buy alloy nuts singly, locks in a pack of 4,
or why not buy our pre-packs of 16 nuts and 4 locks with key included. If
you've changed your wheels from the standard factory ones, then there's every
possibility the nuts or bolts will need to be different - and the same applies
to the locks. If your bolt pockets are
smaller than standard and too small to accept a standard socket, then you’ll need our SD
tuner nuts.
NUT & BOLT COVERS
Our Premium quality plastic wheel nut/bolt covers to
hide the decayed original ones on your car. Fit snugly over the top to improve
the look of your wheels. Sold in packs of 20. These will not fit locking wheel
nuts/bolts.