Freewing Eurofighter V2 960mm PNP EDF Impeller Jet NEU&OVP

The Freewing Eurofighter is one of the most unique EDF jets in both looks and function, and now it's available in a significantly upgraded version 2. The new version of the Eurofighter now includes a 12-blade EDF with metal housing powered by a massive 3748-1450KV Outrunner Motor which produces over 7 pounds of thrust for extreme speeds and intense aerobatics. The sound produced from the 12 blade EDF will simply blow you away. While 5 and 6 blade EDF produce a high pitched whining sound, the 12 blade EDF with metal housing produces the "whoosh" and air crushing sound similar to a gas turbine jet. Freewing spared no expense with electronics in this plane, they are using a 130A Hobbywing ESC and 9 gram metal gear servos on all control surfaces. The assembly (and disassembly) process of the Eurofighter has also been improved; no more gluing of wing surfaces - the wings, rudder and canards are mechanically attach to the fuselage with screws. The nose and main landing gear are all metal and include redesigned shock absorbing struts to protect the gear during hard landings. Other upgrades include super bright LED landing and navigation lights, sequenced landing gear doors, magnetically attached drop tanks, and detailed cockpit. If you want the ultimate in thrust vectoring maneuverability combined with top of the line scale appearance, look no further than the new Freewing Eurofighter Typhoon V2 90mm EDF Jet.
Features:

    Giant scale electronic ducted fan RC jet (measuring almost five feet in length) with numerous scale features - functional canards, hand painted pilot, highly detailed cockpit, molded panel lines, scale air intake, drop tanks and more
    Dual 360 degree vectored thrust allows advanced maneuvers like hovering, flip turns, and flat spins
    12 Blade factory balanced EDF with metal housing combined with 3748-1450KV brushless outrunner motor produces realistic jet turbine sound and an incredible 7 lbs of thrust
    Composite fan blades combined with metal EDF housing make the Eurofighter V2 AMA compliant (the fan blades themselves are NOT metal, so there are no flying restrictions)
    130 Amp Hobbywing ESC with 8A UBEC
    New glueless assembly and mechanical wing attachments provides a stronger airframe and aid in transportation of the Eurofighter V2
    Flight surfaces are controlled with 9g metal gear servos for precise movement, strength and long life
    Bright LED landing and navigation lights for enhanced realism and dawn/dusk maneuvers
    Electronic retractable landing gear with all metal shock-absorbing struts and metal trunnions
    Scale, sequenced gear doors provide added realism and improved aerodynamics
    Drop tanks attach to the underside of the wings with rare earth magnets making them easy to remove before high speed flight
    Upgraded pushrod clevis and metal ball head connectors provide a robust connection between servo and control surface and eliminate "play"
    Nylon hinges on all control surfaces (superior to foam hinges)
    Brushless outrunner motor, servos, ESC and 12 blade EDF come pre-installed for your convenience

Requires:

    Minimum 7 Channel Radio 
    7-8 Channel Receiver 
    6 Cell 22.2V 5000 mAh Lipo Battery 
    Lipo Battery Charger

Wingspan 960mm / 37.8in
Length 1400mm / 55in
Flying Weight 3050g / 107.6oz
CG (Center of Gravity)  check manual
Power System 3748-1450kV Brushless Outrunner Motor
Electronic Speed Control 130A ESC, 8A UBEC
Propeller / EDF 90mm Metal EDF with 12 Blade Fan

Servos
9g gear standard with 100mm lead: Nose gear door, main gear door left, main gear door right
9g metal gear standard with 550mm lead: Left canard, right canard
9g metal gear standard with 300mm lead: Left aileron, right aileron, rudder, nose steering
9g metal gear standard with 100mm lead: Vector
Landing Gear  Full metal retractable main and steerable nose gear with shock absorbing struts

Required Battery 6S 22.2V 5000mAh 35C LiPo
Required Radio 7 Channel
Ailerons Yes
Elevator Yes
Rudder Yes
Flaps No
Lights Yes

Hinge Type
Nylon hinges
Material  EPS Foam
Skill Level  Advanced
Build Time  3 Hours
Recommended Environment  Outdoor

• Artikel Nr.: 211395
  
• EAN / GTIN: 6600211395298