ZWO ASI120MM-S USB3.0 High-speed Mono Camera - moon, planets, weather

 

welcome to

Telescope-Express

++ your partner for a broad variety of astronomical telescopes and accessories ++

 

Telescope-Express: Your expert for adaptors, Special Adapters for Astro Photography please have a look at our Shop!

 

The ZW Optical ASI 120MM-S is a very high sensitive CMOS camera with high frame rate for imaging moon and planets, but it can also be used for deep-sky.

 

♦ 1/3" CMOS monochrome sensor MT9M034

♦ 1.2 Megapixels (1280*960)

♦ Pixel size: 3.75 µm

♦ Maximum 60 fps at full resolution

♦ USB3.0 for maximum speed

♦ AR protection window - full transmission also in IR

♦ If infrared should be blocked, an IR-cut filter is necessary

♦ Removable 2.1 mm CS lens (150° angle)

♦ ST4 autoguider port

♦ Super lightweight: only 100 g

 

ZWO ASI120MM-S - super speed Mono Camera with high sensitivity

With up to 60 fps at maximum resolution, it is especially suitable for imaging moon and planets, but it can also be used for deep-sky.

 

Lower resolutions result in significantly higher frame rates, appropriate for "lucky imaging". VGA (640x480 pixels) offers 133 fps, the maximum rate of 254 fps can be achieved at 320x240 pixels.

 

With its high sensitivity and frame rate, the ASI120MM-S is very well suitable as autoguider which is connected via a stardard ST guider port.

 

Oberving nebulae and galaxies:

 

With the free "FireCapture" software from the internet, individual control of the camera is possible. Within seconds, even faint objects can be shown on the computer display.

 

♦ Automatic stacking

♦ Longer exposure times and higher gain

 

Great feature: a sharp 2.1 mm objective is included

 

The 150° wide angle lens permits the camera to be used fot meteor capturing and also for observation of the observatory or taking nice time-lapses.

 

For this application, you can mount the camera on a tripod or ball-head by using the 1/4" photo thread at the back side.

 

 

Resolutions

Binning 1×1:

 

1280X960@60FPS

1280X720@98FPS

1280X600@116FPS

1280X400@168FPS

960X960@74FPS

1024X768@90FPS

1024X400@160FPS

800X800@85FPS

800X640@106FPS

800X480@141FPS

640X480@133FPS

512X440@145FPS

512X400@158FPS

480X320@196FPS

320X240@254FPS

 

Binning 2×2:

 

640X480@45FPS

 

 

Software and drivers:

The Software can be loaded on the internet. Under "Astronomy", you can find the well-known free camera control and capture softwares FireCapture and SharpCap, but also other software for this purpose.

 

System requirements:

 

USB 3.0 must be available and supported by the operating system. Support exists since

♦ Windows 8

♦ Mac OS X 10.8

♦ Linux Kernel 2.6.31

 

The camera manufacturer writes:

 

"most important is USB3.0 host controller

we recommend "Intel® USB 3.0 eXtensible Host Controller"

from customer´s feedback, all intel host controller works and can provide the maximum data transfer

 

and here is more detail test result:

 

tested platform and USB Host controller:

Lenovo IdeaPad Z580 : intel USB 3.0 eXtensible Host Controller

MacBook air 2014 : intel USB 3.0 eXtensible Host Controller

Dell Inspiron 17-7737 i7 : intel USB 3.0 eXtensible Host Controller

HP Pavilion dv7 Notebook PC:intel USB 3.0 eXtensible Host Controller

MacBook Pro 2013: intel USB 3.0 eXtensible Host Controller

PC:Renesas Electronics USB3.0 Host Controller

PC:AMD USB3.0 Host Controller

 

PCIE-USB3.0 Card: NEC/Renesas μPD720200A μPD720201 & μPD720202

PCIE-USB3.0 Card: VIA Labs VL800

 

already know incompatible USB host:

PCIE-USB3.0 Card: NEC/Renesas μPD720200 under windows 8

PCIE-USB3.0 Card: Trendnet TU3-H2PIE card

PC: Etron usb3.0 host controller"

 

For further selection of telescopes and accessories, please visit us in our online shop at Teleskop-Express.

we don´t ship to islands !!