Product Description

Reboot mig welder

Core advantages：

 

  • Efficient arc starting
  • Stable welding
  • Small size, easy to carry
  • Easy to operate
  • High welding efficiency
  • IP21S grade protective housing, stable components.
  • The main circuit and control circuit of RBM210D welding machine are physically isolated, which effectively prevents the influence and disturbance of the main circuit on the control circuit. The overall structure has better moisture resistance, drip resistance and dust resistance, and can adapt to work in harsher environments.

 

Wide Application

 

Reboot
About the RBM2100D Welder Machine

 

  • Reboot welders adopt the latest PWM technology and IGBT power module, which can change work frequency to medium to replace the traditional transistor transformer with the medium frequency transformer.
  • All of our welders are very friendly to beginners in welding and can quickly get started.

 

5-in-1 welding machine with IGBT technology

MIG gas/Flux core/Spool Gun/LIFT TIG/Stick/2T/4T

Input power voltage（V）：110V/220V±15%

Output current adjustment （A）：31-150A/31-210A

No load voltage (V) ：50±5

Duty cycle (%) ：60%@150A 110V / 60%@200A 220V

Power factor ：0.7

Efficiency (%) ：85

Wire feeder type ：All-in-one

Wire feed speed(ft/ min) ：7-49

Enclosure protection class ：IP21S

Insulation grade ：F

  • Package dimension (In)：18.5 x 12.6 x 14.8
  • Net Weight (lb)：19.8lb
  • Welding thickness range（in）：0.020‘’-0.400‘’
  • Suitable for all kinds of welding requirements .023”/.030”/.035”/.040" solid wire, .030”/.035”/040" flux core wire
  • Recommended .040” aluminum wire (spool gun can weld aluminum )
 

Extraordinary Protection

2T/4T mig welder torch

2T/4T mig welder torch

Powerful heat dissipation

In order to keep the machine working for a long time under high current output, natural ventilation can not meet the cooling demand, this machine adopts intelligent fan

 

  • Rapid heat dissipation
  • low noise
  • Reduce dust intake
  • Energy saving

 

2T/4T Mode

 

  • 2T mode is more accurate: 2T mode is suitable for electric welding or welding seam is relatively short, welding time is short, welding effect is more accurate. The welding result is more accurate.
  • 4T mode is more efficient: 4T mode is suitable for long time continuous welding The 4T mode is suitable for continuous welding for a long time, which can greatly reduce the burden on fingers and improve the working efficiency.

 

Digital intelligent control

The RBM210D achieves two major precision matches to achieve the best welding results.

 

  1. Wire feed speed equals to melt speed
  2. The balance between the thickness of the welded part and the energy required to melt the base material for welding

 

The two precise matches avoid the following in welding

 

  • Thick plates are not deep enough
  • Thin plates are easily welded through
  • Wire elongation is easy to blow the wire
  • Too much spatter
  • Unattractive weld seam

 
 

GREEN

Widely applicable

reboot welder

Quality after-sales service:

We have a team of professional engineers and after-sales service, so we can help you solve your problem in the shortest possible time. We will take every action to prevent you from taking any losses, because we value our customers' investment and trust more than anything else.

Widely applicable

 

  • Weldable materials: stainless steel, alloy steel, carbon steel, cast iron, aluminum and other metals.
  • Use crowd: novice, DIY enthusiasts, professional welders.
  • Flat welding, vertical welding, pipe welding, back welding, all-round welding, not affected by any angle.

 

Safety protection

Our welding machine is equipped with a power supply voltage compensation device, which can continue to work when the power supply voltage is insufficient or exceeds the rated voltage by 15%.

And the welding machine provides a number of protection measures to provide every user with absolute security during welding.
 
Widely applicable

How to weld aluminum with spool gun (this machine does not include spool gun)

 

  • Clean the oxide film on the aluminum surface with a stainless steel brush, and clean the aluminum welding wire surface with acetone.
  • Select MIG mode for machine function and switch the gun mode to spool gun mode.
  • Correctly connect the spool gun to the machine(DCEP).
  • Install the aluminum welding wire with matching diameter to the spool gun.
  • Welding aluminum must be protected with 100% argon.
  • Push welding is adopted, which is called left welding, that is, push welding from the right to the left.

 

 
MIG WELDER 110/220V with gas

Due to the space limitation of the operation panel, the machine cannot display all the wire specifications of different diameters on the panel for users to choose. Based on the powerful intelligence of the digital control panel, RBM210D supports the use of welding wires of different sizes.

Steps for usage：

 

  1. Prepare a wire feeding wheel that matches the diameter of the welding wire. The knurled wheel or U-shaped wheel is used for flux cored welding wire, and the V-shaped wheel is used for solid cored welding wire.
  2. Prepare for welding according to MIG mode.
  3. Machine function selection MIG mode.
  4. Select the option close to the actual welding wire diameter on the control panel.
  5. Optimize voltage matching parameters through Voltage minor adjust knob.
  6. Start welding.
  7. Adjust the current and fine adjust the voltage according to the actual welding conditions.
PushAuction