This item ships out on Friday (except for holidays or sickness) when my part timer comes in to handle the week's USPS shipments.

for 5 lug OEM (VW / Porsche) and AMERICAN made American Eagle rims like: Porsche Fuchs 5 spokes, Cookie cutters, Imitation 5 spoke and wide 5 lug, Empi 5 spoke (not recent made in China rims) and some BBS rims that will also take the OEM Porsche center caps. The recent Made in China Empi Torq Twister (with longer set screws BUT ASK for them)

Part number: WBC-1                                Old school, era correct, sand cast alum caps... 

The Price is per a set of 4x Caps with set screws and allen wrench

These are the LATEST generation of Wolfsburg alloy caps as American Eagle wheel company back in 1990's started cutting the stout down on their wheels, so these caps are taller to make up what they cut of to save alum. 

Rim / Wheel center opening that these caps will fit (the 3x set screws can be run out for larger rim holes): 65.5 mm or 2 5/8" Inside to 77 MM or 3" (may need longer than stock included 8x32x1/4" set screws so ask for the long sets in the message section)

From the center rim outer edge to inside the cap distance (covers up extended axle end and dust caps): 19 mm or 3/4"

The OD of the top is 3 1/8", set screw wall thickness .175" and ID 2.25"

If you have the OEM mushroom (side view) dust caps on the early VW's, or the later dust caps with 2 bumps on the sides, you might will need to change over to the smooth side Brazilian dust caps.

There's 3x set screws per each cap for attachment to the wide range of wheels. A little trick is to use the included allen wrench from the inside thru the hole and then slip allen set screw onto wrench and screw it back into the threaded hole.

Use blue Loctite on the set screws to prevent backing out. Insert the WBC cap into the uninstalled rim / wheel, equally tighten the set screws to the rim hole.

If you live in a bad area, you can remove the WBC cap and drill little divots that the set screws hit to get them set deeper into the rim to help from people prying them off. If you every use a tire shop later on, make sure the tire shop has that allen wrench, hand tap the center caps to test to see if they are lose before you leave their tire shop so if they just slip them on, you'll find it before you lose a cap!

You can paint the Cast in logo yourself.....them come highly polished only! Rare times small sand pits as the olde school sand casting process. 

Thank you for buying Werksberg Products…. products that work!

Made in America, by Americans... for the world!