Benefits 

• Reduces heat loss - seals stop cold draughts in doors, windows, loft doors, crawl space doors
• Reduces external sounds entering the home - eg traffic, street noises and wind
  
• Reduces dust levels - stops dust carried on air draughts

Features

•  Profile Self Adhesive draught proofing strip
• Blocks cold draughts through gaps 1 to 8 mm wide significantly reducing heat loss
• Easy application (self adhesive / requires no glue or fixings)
• Easily compressed (low closing pressure)
• Suitable for large and variable gaps

Fitting Instructions
Cut to size, peel self adhesive backing strip and apply door frame or window frame.
1. Make sure all surfaces upon which the seal is to be fixed are clean, dry and free from dirt, dust, grease and flaking paint. If necessary, rub down surfaces with white spirit and dry off thoroughly.
2. Take a single section of seal and peel off about 15cm/6" of backing paper to expose the adhesive.
3. Press the seal against the door or window frame, working from the top downwards and pealing off the backing paper as you go. Position the seal on the frame so it will be compressed when the door or window closes.
4. Cut to exact length with a scissors.
6. Repeat this operation for the other vertical side(s) and horizontal section(s).