The Ci2 Mini Easy Rougher (5100) is a carbide cutter wood turning tool that addresses fatigue, safety, and efficiency like no other type of tool. The tool design provides support directly beneath the cutting edge transferring the cutting pressure downward allowing the lathe to "take the pounding" that you would normally suffer through when using a conventional bowl gouge for roughing. No more white knuckling a bowl gouge. Accepts 2 different cutters: Ci2-R2 or the Ci2-Square.

The Ci3 Mini Easy Finisher (6500) is designed to allow you to effortlessly cut from the center of a bowl out to the rim OR from the rim to the center! All without changing any angles whatsoever. You just stand in one spot and cut coming and going until you get to the shape you want. The Mini Easy Finisher comes loaded with one round cutter and when it gets dull, you just loosen the retaining screw and rotate cutter about 1/4 of a turn, then re-tighten the screw. Please note: The round cutters are not interchangeable with the carbide cutters on the Easy Rougher tool bars.

The Ci4 Easy Detailer (7510) is designed with a reduced angle. The long cutting edges make the tool less aggressive as it is plunged into the work. In use the Detailer performs nearly as though a bevel is being rubbed. The unique diamond cutter shape fits in tight places where the cutters on the other tools will just not fit. These tools were designed for the primary purpose of doing the small intricate work and cutting final details on your projects such as small coves and beads on both spindle and bowl work. They can also cut chuck tenons, make inside reverse angle cuts for inside chucking bowls with dovetail jaws, and hog green wood projects.

• Made in the U.S.A.
• Unhandled for those who want to create a custom handle! Set of Unhandled Mini Easy Rougher (5100), Finisher (6500), & Detailer (7600)
• Mini Easy Rougher (5100) (Ci2 square carbide cutter) cuts left, right and straight in without changing approach angle.
• Mini Easy Finisher (6500) (Ci3 carbide cutter) is designed to effortlessly cut from the center of a bowl out to the rim OR from the rim to the center!
• Mini Easy Detailer (7600) (Ci4 carbide cutter) is engineered with a reduced relief angle to the long cuttings edges, making the long edges less aggressive when held in contact with the wood as the nose of the tool is cutting.