Tips:

MK808TSFull System+28 Special Functions,supports Full TPMS Functions and Wireless Diagnostic Bluetooth Connection

MK808Full System+25 Special Functions,doesn't have Bluetooth VCI Connector,no WIFI and BT Functions,doesn't support Full TPMS Functions

【Introduction of MK808TS】

Autel MaxiCOM MK808TS Professional Bluetooth OBD2 Diagnostic Service Scan Tool Car Scanner Programing TPMS Sensor PK MK808 TS608

Autel MK808TS, as an advanced Android-based tablet diagnostic tool featuring all-around fixes of Oil Reset/EPB/BMS/SAS/DPF/IMMO and the comprehensive TPMS service, is the ideal combination of MK808and TS601 (Same Functions as MaxiTPMS TS608 )for DIY enthusiasts and auto repair stores to get faster and more accurate diagnosis.

WIRELESS BLUETOOTH MAXI-VCI MINI

The latest compact size Wireless Bluetooth MaxiVCI Mini OBDII connector can transmit vehicle data to the tablet without a physical connection. Enhanced wireless bluetooth connectivity between the tablet and VCI device allows greater service mobility and easier TPMS sensor interaction while the tablet is still connected to the vehicle for data transmission.

COMPLETE TPMS FUNCTIONS

Autel MK808TS is specially designed to provide the complete TPMS service as MaxiTPMS TS608including TPMS health check, programming and relearn etc., for helping technicians to quickly find out the faulty sensor and turn off the MILs related.

1.Activate all known TPMS sensors and read sensor status;
2.Diagnose for complete TPMS health check with DTC description;

3.Read DTCs from and erase DTCs;
4.Program MX-Sensors by copying original sensor IDs or creating new IDs randomly;

5.On-tool relearn procedure and wide OBD relearn coverage;
6.Toolkit, special TPMS functions;

ALL SYSTEMS DIAGNOSTICS

Besides featuring the quick and precise full OBDII functions, this automotive diagnostic scanner can also work on all available system modules in vehicles for technicians to diagnose complex problems accurately.

1.Read/clear codes for all available electronic systems;

2.Turn off warning lights;

3.Display live data in text, graph & analog for easy data review;

4.Supports all 10 test modes of the latest J1979 OBD II test specs;

5.Enhanced OBDII Mode 6;

To diagnose Brake System if you feel the brake pedal is mushy and notice unusual odor or noise, etc. A properly operating brake system is critical to ensure safe vehicle control and operation;

To diagnose Emission System if the system is affected by vehicle age or poor quality fuel. A good emission system reduces harmful gases to a large degree and protects you from being fined;

To diagnose Fuel system if vehicle won’t start or “Check Engine” light is illuminated. Check car’s fuel system regularly ensures the best performance of your car with the lowest emissions;

To diagnose Transmission if your car is slipping or difficult to shift. The system plays an important part in the overall performance of your car;

To diagnose Wiper System if you observe chattering or streaking wiper. If the car is not regularly checked, the accident might happen because you can’t see clearly;

To diagnose Light System if you see rapid signal blinking or dimming lights.

And many more ...

The MaxiCOM diagnostic system supports 4 methods for Vehicle Identification.

1.Auto VIN Scan
The MaxiCOM diagnostic system features the latest VIN-Based Auto VIN Scan function to identify vehicles and scan all the diagnosable and run diagnostics on the selected system. This function is compatible with 2006 and newer vehicles.
2.Manual VIN Input:
For vehicles not supporting the Auto VIN Scan function, you may manually enter the vehicle VIN.
3.Automatic Selection:
The Auto VIN Scan can be selected after selecting the test vehicle manufacturer.
4.Manual Selection:
When the vehicle's VIN is not automatically retrievable through the vehicle's , or the specific VIN is unknown, the vehicle can be manually selected.

Remote Technical Support

By using this function, users can receive ad-hoc remote support from Autel’s technical engineers, colleagues, or friends, by allowing them to control this tablet device on their PC via the TeamViewer software.

COMPLETE OBD2 FUNCTIONS

Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)

Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors.

Data Stream:Reads and displays live /PCM data stream, plotting functions graphically and stores freeze frame data.

I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.

Read Live Data Stream:Show the information of continuous data stream from a vehicle in live graphic (waveform) display.

View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.

O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.

On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.

Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.

Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability.

ADVANCED SERVICE FEATURES

MK808TS provides the most commonly-performed capabilities including Oil reset, EPB/SAS/BMS/DPF/IMMO service as MaxiCOM MK808 & MX808TS does, to meet users’ demand for efficient repairs.

lOil reset service allows you to perform reset for a new calculation of Engine Oil Life system once changed the oil.

lEPB service plays an important role in the maintenance of electronic braking system’s safety and efficiency.

lBMS service allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.

lDPF service specially works for Diesel Particulate Filter system with DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.

lSAS service helps clear the faulty steering angle sensor memories and plays an important role in the steering angle sensor calibration.

lIMMO is mainly used to disable the lost vehicle keys and program a new replacement key fob.

And Many More...

Multi-Languages

English, Traditional Chinese, French, German, Spanish, Portuguese, Dutch, Polish, Swedish, Korean, Japanese, Russian, ItalianEnglish, Traditional Chinese, French, German, Spanish, Portuguese, Dutch, Polish, Swedish, Korean, Japanese, Russian, Italian

Multiple Vehicle Models

Asia:

For Acura, Daewoo, Holden, Honda, Hyundai, Infiniti, Isuzu, Kia, Lexus, Mazda, Mitsubishi, Nissan, Scion, SsangYong, Subaru, Suzuki, Toyota, BYD, ChangAn, Chery, DFM, FAW, Foton, Geely, GreatWall, Haval, JAC, Lifan, Luxgen, MG, Zotye

Europe:

For Abarth, Alfa-Romeo, Alpina, AstonMartin, Audi, Bentley, Benz, BMW, Citroen, Dacia, Ferrari, Fiat, Jaguar, Lamborghini, Lancia, LandRover, Lotus, Maserati, Maybach, Mini, Opel, Peugeot, Porsche, Renault, Rolls-Royce, SAAB, Skoda, Smart, Volvo, Volkswagen

USA:

For Buick, Cadillac, Chevrolet, Chrysler, Dodge, Ford, GMC, Hummer, Jeep, Lincoln, Mercury, Oldsmobile, Pontiac, Saturn, Tesla

Advanced Hardware

Android 4.4.4-based tablet diagnostic tool greatly improves the working efficiency with performance and power optimized 1.5GHZ Cortex-A9 Processor.

7 inchtouchable LCD screen with 1024*600 resolutions offers ultra-clear visuals of the diagnostic data, making it easy to navigate and read codes.

1GB RAM DDR3 / 32GB On-Board ROM Memory is not only an extended storage space but a way to reduce the possible issue of slow response.

Built-in 5000 mAh battery provides up to 7 hours continuous battery life for giving you a worry-free operation experience.

MaxiVCI Mini is equipped for connecting between the diagnostic tablet and DLC for wirelessly vehicle data transmission via the fast and reliable Bluetooth 2.1 EDR, allowing technicians to have complete freedom to move anywhere in the repair shop when the VCI is connected to the car.

Perfect Combination for a Diagnostic Scan Tool

Compared with MK808: Autel MK808TS offers the same features and functions as MK808 does, also it comes with additional benefit of TPMS function to perform TPMS Sensor Check, TPMS Relearn, TPMS Sensor Programming to all known OEM/Universal TPMS sensors for helping technicians to quickly locate the faulty sensor and turn off the MILs related.

Compared with TS608: Autel MK808TS offers the same features and functions as TS608 does.

Autel Scanner MK808 2022 Newest Diagnostic Scan Tool Code Reader with All System Diagnosis, Bidirectional Control,38+ Maintenance Services Including IMMO, Oil Reset, EPB, BMS, SAS, DPF, ABS Bleeding

🔥🔥🔥【2022 Huge Function Update, MK808 Equal to MP808】Big Surprise! Since June 1st 2022, with the same cost, turn your MK808 tablet into $749 Valued MP808 scanner.⏩Click the "Update" icon to get new system version V2.62 or above to access all new features: ⭕Bi-Directional Control (Active Test)⭕36+ Service Functions ⭕ FCA Auto Auth for 2017 & Later FCA cars (Chrysler Jeep Dodge Fiat etc)⭕Support MV105/MV108 Inspection camera (not included).
⭐【Bi-directional Control & Special Functions】With the coming up of new software version V2.62 released on 2022 June 1, Autel MK808 now support “Active test” and “Special function”, allow signal outputing to actuator such as Fuel Pumps test, EGR test, and etc. to test component integraty and functionality. MaxiCOM MK808 can also do initial adaptation, self-learning or some auto detection function after maintenance or reset is done, such as Crankshaft Position Sensor Learn.
⭐【Poweful 36+ Service Function】Autel MaxiCOM MK808 is a professional car diagnostic tool that provides 36+ maintainence & reset services including Oil Reset, EPB Reset, SAS Reset, DPF Regeneration, Battery Registration, Throttle Reset, ABS Bleed, Injector Coding, Key Fob Programming and etc.
⭐【2022 New Feature- Auto Auth】Since 2022 June 1, Autel adds "Auto Auth" new functions on MK808 tablets, enable your Autel tablet to communicate with the FCA SGW Authentication System and bypass the SGM so you can perform diagnostics and bi-directionals without using a bypass cable. You can obtain these functions with new software package (V2.62 and above) by tapping "Update" icon on your tablets.
⭐【One-click to Perform Full System Diagnostics】Autel MK808 diagnostic tablet scanner can scan all available electronic systems like Engine, ABS, SRS, Trans, EPB, Chassis, Steering, TPMS and etc to perform full diagnostics to read/clear codes, view live data stream of multiple sensors in text or graph and retrieve E~CU info. MK808 now can work with MV108 inpecition camera for quicker diagnose on confind areas.
⭐【AutoVin & Auto Scan & Multi-language】 Autel MK808 features with AutoVin function to easily read the vehicle identification number with one click. And Auto Scan can perform a comprehensive scan on all available systems of your vehicle. 13 Language options allow workshop mechanics to use the device in native language to improve working efficiency. MK808 Scanner support English, Spanish, French, Portuguese, German, Russian, Japanese, Chinese, Korean and etc
⭐【Support Some 2022 New Car Models】As the upgrade version of the old Maxicheck MX808, Autel MK808 is capable of working on over 14000 global car models, able to work on 2022 new released Dodge and Ford car models such as Ford F-150 2022, Ford F-750 2022, D2-Ram 3500 Pickup 2022, DT-Ram 1500 2022 and so on. The current vehicle coverage is already vast and is still growing with frequent ongoing software update.

Autel MaxiCOM MK808 2022 Version: New Defination of "Cost-Worthy"

Autel MaxiCOM MK808 is the most cost-worthy Autel scanner up to date, integrates Bi-directional Control, Complete Special Functions, 28+ Services, All system Diagnostics, Digital Inspection, Auto Auth, IMMO Functions, Battery Registration and Reset and etc. Along with intuitive user interface & ultra-portability, MK808 is the perfect companion for DIYers & reparir workshop.

Bi-Directional Control: Same As MP808/MP808K/MP808BT !

With the coming up of new software version V2.62 released on 2022 June 1, Autel MK808 now support “Active test” (BI-Directional Control) on various module actuators for more instant & accurate diagnosis, which is now in the same level as MP808/MP808K/MP808BT, but cost you 300 bucks less.

AutoAuth Access: Bypass SGM in FCA Vehicles

Autel MaxiCOM MK808 allow direct access to the security gateway module on 2017 and later Fiat Chrysler vehicles, so that the diagnostic tool can perform easier full diagnostics, run bi-directional active tests, actuations, relearns or even IMMO key programming (pulls PIN & write), ADAS calibration assistance etc.

Digital Inspection: Work with MV108

The Digital Inspection application configures the MaxiSys Diagnostics Device to operate as a digital video scope by simply connecting the tablet to a Digital Inspection Camera. This function allows you to examine difficult-to-reach areas normally hidden from sight, with the ability to record digital still images and videos, which offers you an economical solution to inspect machinery, facilities, and infrastructure in a safe and quick way

Special Function : initial adaptation, self-learning or some auto detection function with many procedures that the vehicle is performed after maintenance or reset is done or some related component in electronic control system is replaced, such as Crankshaft Position Sensor Learn

New 7 Added Functions in BMW 4.0 Software:

transport mode, high-voltage battery, cruise calibration, air conditioning learning, rain light sensor, EGR self-learning, and FRM reset; Adds basic functions and special functions for models with 4 types of chassis including G22 and G82.

OE-level All System Diagnose

Autel MK808 auto diagnostic scanner adopts the latest VIN-based Auto VIN Technology that enables auto technicians or home mechanics to identify vehicle information, like brand, year, make, model and etc, at a single touch. As the upgrade Version of Autel MX808, Autel MaxiCOM MK808 can reach more modules and car systems to perform deeper comprehensive diagnose, such as Engine, Transmission, SRS(Airbag), ABS, TPMS, BCM, BODY, A/C, Steering, Suspension, Airbag and etc, retrieve E~CU info, get freeze frame data and graphic & text live data for accurate efficient solution.

Support 4 methods for Vehicle Identification:

Auto VIN and Auto Scan;
Manual VIN Input;
Automatic Selection;
Manual Selection.

One-stop Car Care: 36+ Maintainence & Reset Services

Autel Scanner MK808 2022 version is the upgrade version of Maxicheck MX808, able to perform up to 28 maintenance services, include but not limited to

ABS Auto Bleed, Oil Reset, SAS Adjustment; DPF Caliberation, Throttle Relearn; Injector Coding, DPF Regeneration, service mileage reset, EPB Reset & ect.

Note: The above mentioned is just a small portion of all supported services and more are not listed.

Note: Please also know that Not All service & Special functions are universally compatible. Please send VIN number and the functions you need to us to check compatibility.

Most Commonly Used Services

ABS Auto Bleed

Autel MK808 enables technicians and home mechanics to bleed air out of the ABS module and saves you time and money paying a visit to dealership.

Injector Coding

When an injector is repaired, its operating characteristics change significantly. Therefore, it is very important to assign a new code C2i or C3i to the injector to properly reflect the performance of the repaired injector. Autel MK808 is able to do the job for your car.

Oil Reset

Whenever there is an oil change, you have to reset the engine oil system. This is because the engine oil life system is responsible for calculating when engine oil and filter should be changed. In that case, Autel MK808 diagnostic tool can help you fix oil service light quickly.

EPB Reset

If the Emergency release cable has been activated, Autel MK808 allows the EPB to be un-jammed when the vehicle has entered a state where the brakes screech when applying the Parking Brake, the rear brakes squeak or rub when the vehicle is moving or there is evidence of shoe-drag.

Supper Wider Vehicle Coverage & 13 languages

Wide Vehicle Coverage:

Autel OBD2 Scanner MK808 has unmatched vehicle coverage, able to supports various protocols such as ISO9141-2, ISO14230-2, ISO15765 ,K/L-Line, Flashing Code, SAE-J1850 VPW, SAE-J1850PWM, ISO 11898 (Highspeed, Middlespeed, Lowspeed and Singlewire CAN, fault-tolerant CAN), SAE J2610, GM UART UART Echo Byte Protocol, Honda Diag-H Protocol, TP2.0, TP1.6..

Autel MK808 diagnostic tool can work on 85+ American, European and Asian car makes and over 10000+ car models and can support some of the 2022 latest car models. For example, MK808 can support Ford F-150 2022, Ford F-650 2022, Ford F-750 2022, Dodge D2-Ram 3500 Pickup 2022,

Dodge DD-Ram 3500 Cab Chassis 2022, Dodge DF-Ram 3500 Cab Chassis 10K 2022, Dodge DJ-Ram 2500 2022, Dodge DP-Ram 4500 2022, Dodge DP-Ram 5500 2022, Dodge DS-Ram 1500 2022, Dodge DT-Ram 1500 and a lot more.

Note: Autel MK808 can not work on heavy trucks.

About The Languages:

Autel MK808 is designed to service global users with different language background and this is reason why it offer various language options. The default language of this device is English. It can now support up to 13 languages: English, Spanish, French, German, Russian, Italian, Portuguese, Japanese, Korean, Chinese, Swedish, Dutch & Polish.

Note: If you need to switch to a different language, please come to us wuth device S/N (12 digits, at the back of the device, eg: VB7GL6C0576)

Specifications:

Recommended Use	Indoor
Operating System	Android™ 4.4.4
Processor	Cortex-A9 processor(1.6 GHz)
Memory	64GB
Display	7-inch LCD capacitive touchscreen with 1024x600 resolution
Connectivity	Mini USB 2.0 USB 2.0 Wi-Fi Micro SD card (supports up to 32GB)
Sensors	Ambient light sensor for brightness auto adjust
Audio Input/Output	Input: N/A Output: Beep
Power and Battery	3.7 V/5000 mAh lithium-polymer battery Charges via 5 VDC power supply
Tested Battery Life	Around 4.5 hours of continuous use
Battery Charging Input	5V/1.5A
Power Consumption	500 mA (LCD on with default brightness, Wi-Fi on) @3.7 V
Operating Temp	0 to 55°C(14 to 131°F)
Storage Temp	-20 to 60°C (-4 to 140°F)
Operating Humidity	5%-95%non-condensing
Dimensions(WXHX D)	237.8 mm (9.4”) x 148.6 mm (5.9”) x 35.5 mm (1.4”)
Net Weight	788 g (2.42 lb.)
Supported Automotive Protocols	ISO9141-2, ISO14230-2,ISO15765, K/L-Line, Flashing Code, SAE-J1850 VPW, SAE-J1850 PWM, ISO11898(Highspeed, Middlespeed, Lowspeed and Singlewire CAN,fault-tolerant CAN), SAE J2610,GM UART,UART Echo Byte Protocol, Honda Diag-H Protocol, TP2.0, TP1.6