| Package contents: 1. U2ATASD Card reader X 1 2. USB 3.0 cable X 1 Installation: 1. Power on the PC and entering OS. 2. Connect the reader to the USB 3.0/2.0 port of PC with the USB cable. 3. OS will automatically identify the device and install proper driver. 4. Installation completes; insert the flash card into the reader and the data within can be accessed. 3.3V/5V ATA interface switch settings: The ATA card interface pf the reader supports 3.3V or 5 V, which is determined by the switch on the rear panel. The default setting is 3.3V; if the ATA card can not be identified with 3.3V interface, please switch to 5V and try again. Please be noted that the USB connection should be removed before adjusting the switch. Specifications: 1. Support USB 3.0 and USB mass storage device class 2. Compatible with USB 2.0 3. Support Two Type I/II ATA flash PCMCIA cards(Please be noted that the reader does not support any Cardbus cards, I/O card, Linear Flash card, SRAM card, or Panasonic P2 cards) 4. Support 3.3 V /5V ATA flash card interface 5. Support SD/SDHC/SDXC card up to spec 3.0; capacity up to 2TB 6. Native driver supportedby WIndows 10/8/7/VISTA/XP/2000/ME, MacOS 9.x or above, Linux Kernal 2.4.2 or above, Chrome OS, and any other OS which supports USB 2.0 mass storage device class. |