St Lowering Springs for BMW 3er Touring E30 50/40mm 28220062

ST lowering springs

With more than 1,000 applications, the wide range of springs from ST suspensions is one of the few lowering springs on the market that, in combination with the standard chassis, improve the handling of a vehicle. In addition to an attractive lowering, the ST suspensions sport springs enable an increase in cornering speed and dynamic driving.

Great look for every car

The ST suspensions sport springs, made of chrome-silicon steel in a cold-winding process in original equipment manufacturer quality, are multi-tempered and have a final epoxy coating. This means they can withstand a wide variety of weather conditions. Depending on the vehicle model, the ST suspensions sport springs can be used to achieve subtle lowering of, for example, 20 mm at the front and 15 mm on the drive axle on the current BMW M3 (E9x series), an attractive 30 mm on both axles on the Audi A1 or up to 60 mm on the VW Golf I will. When installing ST suspensions sport springs, not only does the body's center of gravity lower compared to the standard suspension, but driving dynamics also benefit from it. In the case of strong steering movements, such as evasive maneuvers and fast cornering, the body structure movements are reduced due to the lower roll tendency. In addition, the compression and rebound is reduced, making the handling more agile.

The ideal spring rate for every lowering

The spring rates of the ST suspensions sport springs harmonize perfectly with the tuning of the series dampers. After all, the ST suspensions sport springs in connection with the respective vehicle weight, the wheel loads and the level of the intended lowering have a major influence on the compression and rebound behavior of the standard suspension. The ST suspensions sport springs made of chrome-silicon steel not only carry the vehicle weight, but also guarantee more direct driving pleasure thanks to the specially tuned spring rates. Depending on the level of lowering, for example a reduction in the center of gravity by 20 mm, 30 mm or 40 mm, the ST suspensions sport springs have different spring rates that harmonize with the series dampers. The greater the level of lowering, the higher the spring rate.