Product Introduction
ENSURE YOU READ THE NOTE BELOW BEFORE BUYING THIS PRODUCT.
This Male-Male rubber bobbin mount has the following unusual selling
features:
1. It uses a “waisted” rubber
body design driving increased deflection and therefore a lower natural
frequency of the resulting system. This
in turn provides more effective vibration isolation.
2. It uses a
particularly high grade of natural rubber (military grade), which is better at
vibration attenuation than lower grades of rubber - especially with age.
There are other benefits to this rubber too, however they are less relevant for
this application.
3. A longer and more
complex bonding process than most competitor products, which offers a longer
product life. The rubber-metal bond is guaranteed for the life of
the product.
This product is used in many automotive and industrial applications, and
it is made in the UK.
We are ISO 9001:2015 certified by SGS, and we work to very high quality
standards.
All dimensions in the drawing are in mm
This rubber element and the bond of this product is geared towards
engineering performance.
NOTE: The steel threads can only withstand very low torques – 10nm max. We recommend using a superglue or a locking
nut to help lock nuts in place. This
product has been in use within the automotive industry for many decades, and as
such has been cost engineered for the specific application.
Recommended Loading:
In compression, we would recommend the following load range for
vibration related applications:
As a guide, these numbers should be halved for pure shear. We do
not recommend using these products in tension.
Vibration absorption performance:
These mounts will start to become effective with the
following forcing frequencies:
As a guide, vibration performance of the product in compression at
the following forcing frequencies is expected to be approximately:
This mount can be used in shock related applications but for notably
lower loads than those quoted above. If your application involves shock,
we would recommend contacting us for assistance in ensuring that the correct
product is specified.
Other important points:
1. The data given
describing the performance of this product are as precise as reasonably
possible. If your design intends to use
this product towards its lower load or forcing frequency recommendations, we recommend
testing before implementation.
2. For mounts with a
female thread, ensure that it is not penetrated beyond the depth of the female
thread as this will negatively impact product performance.
3. This product uses
natural rubber which is not designed for regular exposure, oils or solvents.
4. Optimum operating
temperatures for natural rubber are -20° to +70°C.
5. This product should
not be used near flames.
6. All of our products
are both RoHS and REACH compliant.
7. AVMR is a registered
ISO 9001:2015 compliant company and is audited by SGS annually.
A datasheet on this product is available on request.