Shipping

Last Updated: 10 May, 2023 Economy Shipping
Austria Bahrain Cambodia Denmark France
Germany Hong Kong Indonesia Japan Korea
Lithuania Macao Malaysia Netherlands Norway
Philippines Poland Saudi Arabia Singapore Slovakia
Spain Thailand Turkey Ukraine United Arab Emirates
United States Vietnam
Standard Shipping We will ship via Singapore Post and we have resumed shipping to most countries (57 countries), but because it is still affected by the epidemic, the shipping days may be 1-3 weeks. FedEx international priority shipping or DHL Applicable to all countries. (Direct shipping from Taiwan)

Product Features

  • 1.The original agreement not compromised due to installation; no need to buy additional certificate; no need to install KAFAS cameras
  • 2.Prompting for speed limit and speeding and support for HUD display (HUD hardware required on board)
  • 3.Constant display of current speed limit to ensure the speed limit has not exceeded and prevent speeding tickets

Installation Guide

Coding is required for Kombi and HU_NBT/HU_NBT2 for normal display after the product is installed. We have listed the parameters that need to be modified for all models. If you can't find some parameters in your vehicle, please ignore it and don't worry!
HU_NBT / HU_NBT2
  • SPEEDLIMIT_INFO = aktiv
  • SLI_NAVI_DISPLAY = nicht_aktiv
KOMBI / DKMOBI
  • (F Series)
  • ANZEIGE_NPI = aktiv
  • KI_PIA_SPEED_LIMIT = aktiv
  • SPEED_LIMIT = aktiv
  • SPEED_LIMIT_GENERATION = sli_gen_2_npi
  • RCOG_TRSG_APPL = aktiv  (* See Notice below)
  • RCOG_TRSG_TIMEOUT = aktiv  (* See Notice below)
  • (G Series)
  • ADDITIONAL_SIGN_ENABLE = aktiv
  • ANZEIGE_NPI = aktiv
  • CB_TACHOZEIGERBAND = aktiv
  • CB_SLI_NPI = aktiv
  • PIA_SLI_NPI = aktiv
  • RCOG_TRSG_APPL = aktiv  (* See Notice below)
  • RCOG_TRSG_TIMEOUT = aktiv  (* See Notice below)
  • SLI_PERMANENT_ENABLE = aktiv
  • SPEED_LIMIT_ENABLE = sli
  • TACHOZEIGERBAND_ENABLE = aktiv
  • NO_PASSING_ENABLE = aktiv
  • SPEED_LIMIT_UNIT_ENABLE = Wert_02( If you don't want to display speed unit kmh or mph, please set Wert_0 )

  • 【HUD】If your vehicle have HUD (Head-Up Display) , Ignore if not applicable
  • HUD_NPI_ENABLE = aktiv
  • HUD_PIA_SPEED_LIM = aktiv
  • HUD_SPEED_LIMIT_ENABLE = aktiv
  • HUD_SLI_ENABLE = aktiv
  • PIA_HUD_SLI = aktiv
  • PIA_HUD_SLI_NPI = aktiv
  • PIA_HUD_SLI_PORTIERUNG = aktiv
  • PIA_HUD_VSLI = aktiv

  • 1.Check "Speed Limit Information" in the Instrument cluster setting function of i-Drive.
  • 2.In some models, you need to press the BC button on the outside of the turn signal lever to switch the additional information displayed by the instrument cluster.
* Notice: If your vehicle has an fault code of E1149E, please change RCOG_TRSG_APPL and RCOG_TRSG_TIMEOUT to nicht_aktiv

Notes

  • Before ordering, please confirm whether your vehicle equipment meets the following three conditions.
  • 1)Head unit: Only NBT, EntryNav, EntryNav2, EVO is supported. 

  • 2)Roadmap: Only NEXT, EVO, ROUTE is supported. (PREMIUM, MOTION, MOVE does not support)

  • 3)Instrument cluster(KOMBI): Only 6WA, 6WB is supported (see product photo), Basic Kombi does not support.

  • 1.The no overtaking icon varies depending on car models. The pictures provided in the product brochure are for reference only. The icons shown with the original BMW settings apply.
  • 2. Our products support F and G series. You can use the switch on the product module to adjust the specifications of the icon to be displayed.
  • 3.This product is not suitable for cars without a navigation system.
  • 4.In case that your car is not of any of the years listed, the product can still be installed provided that your car is equipped or added with an NBT or EVO module.
  • 5.Only 6WA, 6WB are supported, Basic Kombi are not supported.
  • 6.iDrive 7 models are not supported.
  • 7.When driving into a non-road section, the previous speed limit number will be displayed for 20 seconds.
  • 8.On some roads without speed limit information, it will always display "---" symbol.

New Features

  • 1. In our new SLI V4 version, you can change the specification pattern to be displayed by yourself, including red circles (ECE) and white squares (US).
  • 2. When you travel in different countries, there may be different speed limit units (km/h or mph). Now you can easily switch.
  • 3.If your head unit is Entrynav, please switch to 606. For other head unit, please switch to 609. In some countries, you may encounter a display adds 5kmh/mph. In such cases, you need to switch to 606.

Customs Fees

Due to the different customs conditions for collecting customs in different countries, customs may be levied when shipping to local customs. All sales and shipping fees do not include customs fees, you need to bear the customs fees yourself, thank you for your understanding!

Speed ​​Limit Info SLI Module for BMW F10 Retrofit Installationa https://youtu.be/rAtGbeaUcX8
SLI V2 Module Test work before shipment https://youtu.be/aOk5mlh7Yac