- I’m Romondes SM601 automotive smoke machine, come with a hook allows you to hang me on your hood latch, conical adapter fits most intakes,
- 【Powerful and Easy to Use】1: Mount the hook and the shop air adapter, plug the power and screw on the smoke hose to the unit.2: Fill (mineral Oil based)
- 【Diagnose All Types of Leaks】As a professional smoke leak detector, I can help you to locate hard-to-find leaks in any sealed system, like EVAP system, crankcase system test,
- 【Advanced, Precise, Efficient 】 I'm a good assistant of car code reader. Normally, 60% of engine fault codes are related to pipelines. Adopt the most advanced fifth generation technology,
Have you met some troubles like below when using an smoke machine automotive?
- "Smoke turns to liquid almost instantly inside whatever you are testing"
- "The smoke is very thin, impossible to see and find leaks"
- "Fluid leak cause catastrophic engine damage"
After five generations of technological innovation, SM603 Smoke Leak Detector was born. Avoiding all the disadvantage of past technologies, SM603 has these advantages:
Easy to Use: With easy-use function and portable design, the hook allows you to hang it on your hood latch, and conical adapter will fit most intakes.
Powerful and Durable: The third-generation technology uses heating wire and wick cotton, needs to be replaced frequently and the smoke has a peculiar smell. The fourth-generation technology uses ceramics heating, it's very fragile during transportation and use. SM601 auto smoke machine avoids these shortcomings, as a durable smoke detector, it also saves you a lot of money.
Output Smoke in Seconds: Output lots of smoke within 30s to detect the leaks in pipe system, reducing diagnostic time dramatically.
Safe for All Vehicles: Protect vehicles from high pressure damage, also avoid fluid leak cause engine damage.
How To do leakage Test with SM603 Automotive Smoke Machine?
1. Fill 20ml baby oil to the detector for the first time. Open the engine cover, and hang the detector in the cover.
2. Disconnect the pipe that needs to be connected with detector.
3. Connect detector with DC12V battery, turn on the power switch, and the detector starts to work.
4. In about 30 seconds, the pipe will be filled with smoke. Check the leak points. Please use head lamp if necessary.
Romondes SM603 Car Smoke Leak Detector is a universal and professional auto pipe leak detect tool, it will help you to locate hard-to-find leaks in any sealed system, such as Cooling System Test, Car Sealing Test, Throttle Shafs, Engine Block Test, Intake System Test, Exhaust Systems Test, Crankcase system test, Fuel Tank System Test, Turbo System Test, Various Pipe Fittings Test, etc.
- Car Sealing Test: Poor airtightness of the car may lead to a lot of inconvenience like inability to keep warm dusty, not soundproof, and not waterproof ,etc.
- Fuel Tank System Test: When there are gaps in the fuel tank and piping caused by improper installation or insufficient sealing of the fuel tank cap, it can cause leaks in the fuel tank system.
- Exhaust System Test: Unpurified harmful gases to be discharged into the atmosphere or increase vehicle noise is the main disadvantage when leaks happened in the exhaust.
- Intake System Test: Leakage in the air intake system will lead to insufficient intake of the car engine, which will result in scant engine power.
- EVAP System Test: Leakage of the fuel evaporation system will cause fuel vapor to leak into the atmosphere, causing waste and pollution or unstable engine idling.
- Crankcase System Test: Excessive pressure or corrosion of the crankcase is the main reason to damage the seal of the crankcase and cause oil leakage.
- Turbo Test: The leakage of coolant would cause the engine to report high water temperature.
- Various Pipe Fittings Test: Smoke testing of brake hoses, power steering hoses, cooling system hoses, air conditioning system hoses, turbocharger hoses, fuel hoses, intake and exhaust system hoses, etc.
With the superb design, the SM603 leak detector can out put smoke within seconds and discover leakage holes as small as 0.2mm. Adopts the principle of isolated heat conduction, the smoke created from the machine is non-toxic. To ensure the safety of people and vehicles, the engine does not need to be ignited during use. Unlike the traditional method of using soapy water, only the upper half of the complex pipeline can be tested, cars are tested for all-round pipeline leakage.
- Output pressure: 0.5PSI
- Output Volume:< 8LP M
- Power Supply: DC12V
- Current: 5AMP
- The flow meter indicates the leak size:
- For DTC P0456, the meter should be at0.1 LPM.
- For DTC P0442, the meter should be at0.5 LPM.
Overheat & Anti-frost Protection
SM601 EVAP Smoke Machine is equipped with a smart protector. When the temperature of the device exceeds eg. 75°C , the power will be intelligently activated to turn it off to ensure the safety of the operator and the device, also suitable for low temperature operation.
Note: Use mineral oil based smoke oil, do NOT use water based liquid, water based liquid will heat up quickly and lead to overheating.
Suitable for all domestic cars, motorcycles, snowmobiles, off-road vehicles, beaches. Cars, light trucks and speedboats, etc. Using together with automotive diagnostic tool, you can find the vehicle problem accurately and diagnose fault.
The Function of Operation Components of the Vacuum Smoke Machine
- A - Oil Refill Port: For oil refill while its needed. The funnel is a nice helper to prevent oil from poured to the surface of the unit.
- B - Velcro Strap: For collection of the smoke delivery hose, and power cord before storage.
- C - Smoke Outlet Port: While set up the unit, the Smoke Delivery Hose need to be mounted onto the Smoke Outlet .
- D - Power Socket: While set up the unit, the power cords need to plug into the power socket.
- E - System Pressure Gauge: The Pressure Gauge displays the output pressure of the machine if block the smoke outlet port, otherwise it shows the real time pressure of the system been testing.
- F - Flow Meter: The purpose of the flow meter is to provide a quick visual indication of the amount of smoke passing through the system being tested. If the smoke nozzle is in a closed system, and there are no leaks in that system, the flow meter will read zero (ball at bottom of scale). As the system is filled with smoke, the ball in the flow meter will slowly fall to the bottom of the scale as the pressure in the system equalizes to the output pressure of the unit. As the flow decreases, the output pressure will increase. If the flow meter ball never falls to the bottom of the scale, there is leakage or air passing through the system.
- G - Flow Dial: The purpose of the Flow Control Valve is to decrease the amount of smoke exiting a leak so that its position may be pinpointed without the masking effect of excessive smoke. Turn clockwise to decrease flow, counterclockwise to increase flow. This valve is also used to lock out the system under test and observe any pressure decay on the pressure gauge.
- H - Oil Level Gauge: While set up the unit, smoke oil need to be filled into the unit, do not exceed the MAX line. Check and confirm proper oil level periodically. If the oil level is lower than the MIN line,the unit would need a refill.
Warm Tips:
- The oil level shall not exceed the level gauge and please do not exceed 15 ml when adding new oil later.
- Please do not to operate the SM603 evap system smoke machine continuously for more than 8 minutes.
- Before refilling new oil, please pour out the remaining oil in the detector, drain the old oil and then add new oil.
- Use mineral oil based smoke oil, do NOT use water based liquid, water based liquid will heat up quickly and lead to overheating.
- To ensure the safety of people and vehicles, the engine does not need to be ignited during use.
- If your smoke machine's fumes are discharged from the top of the machine: please turn on the gas switch first, then power on.
