Connects2 SWC.2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.

A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit.

Features Highlight:

• USB Updateable for latest software version
• Works With Analogue

Compatible with following vehicles:

Car Make / Model	Year	Remarks
Toyota 4Runner	2002 - 2009	Fujitsu Ten/Matsushita
Toyota Auris	2003 - 2009	(E15J)
Toyota Avanza	2003 - 2011	Fujitsu Ten/Matsushita
Toyota Avensis	2003 - 2009	(T25) Fujitsu Ten/Matsushita
Toyota Corolla	2001 - 2011	(T27), (E120) Fujitsu Ten/Matsushita
Toyota Estima	2006 - 2016	Fujitsu Ten/Matsushita
Toyota Fortuner	2005 - 2011
Toyota Hilux	2004 - 2012
Toyota Innova	2006 - 2015
Toyota Landcruiser	1996 - 2002
Toyota Matrix	2003 - 2008
Toyota Prado	2003 - 2009
Toyota Previa	2006 - 2019
Toyota Prius	2009 - 2015
Toyota RAV4	2001 - 2011
Toyota Rush	2006 - 2011
Toyota FJ-Cruiser	2001 - 2007
Toyota Vios	2003 - 2007
Toyota Yaris	2001 - 2011	(XP9) Fujitsu Ten/Matsushita
Lexus GX-Series	2003 - 2009	GX 470 - North America

Connection: OEM Specific

PATCH LEAD This interface connects a compatible car stereo with a joystick input (blue  line-in mini-jack) or wire input on the back of the unit to the existing stalk/steering wheel controls of the vehicle.

CTMULTILEAD.2 Universal head unit connection lead is suitable for:

• Alpine (3.5mm jack)
• Beat (single wire connection)
• Chinese / Xtrons / 3 wire unbranded units (3 wire connection)
• Clarion (3.5mm jack)
• Grundig
• JVC (3.5mm or single wire)
• Kenwood (single wire)
• LG (3.5mm jack)
• Nakamichi (single wire connection)
• Panasonic  (single wire but NOT AV units)
• Philips (single wire connection)
• Pioneer (3.5mm jack)
• Sony (3.5mm jack)
• Zenec  (single wire)
• Other Chinese SWC learning head units

Notes:

• You can simply cut the loops / wires to select which brand you are fitting.
• Supplied with instruction sheet

Please note: This patch lead CANNOT be used for Blaupunkt / Parrot / Becker / JVC KW-AVX  head units / Older Kenwood units with the DIN plug. For those models you need to purchase the lead from our eBay Store. Click here for additional patch leads

Technical Note

• CAR AUDIO FITTING ACCESSORIES ARE SOLD WITH LIMITED INSTRUCTIONS. 
• SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPFUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED.

IMPORTANT NOTE: Please make sure that is the correct Stalk Adaptor for your car by firstly  checking to see if your make, model and year of car is listed in the  advert. Secondly by checking to see if the connection in the picture  listed is the same as you have in your vehicle.

If the connection in the car is different from what you see in the picture then this adaptor is NOT suitable.