Complete

Complete set 20 inch big clear housing,with plastic wrench,screw and metal bracket.Housing only, filter cartridges are sold separately .The clear housing allows you to see when you need to change filters and everything else works as it should.

Pack of 2 set.

Air release valve

Equip with pressure release button for high pressure .

Inlet/Outlet:1"NPT Brass Thread.

 

 

 

How it works?

Please refer above photo.

 

 

 

 

 
Features:
 
  • COMPLETE-Complete set 20inch big blue housing,1"NPT inlet/outlet,with plastic wrench,screw and metal bracket.Housing only, filter cartridges are sold separately .clear housing allows you to see when you need to change filters and everything else works as it should.
  • STANDARD-Fits all standard sized 4-1/2 inch diameter industry 20 inch whole house cartridges
  • HIGH QUALITY-Fits NSF standard,Large capacity housing for high flow applications
  • WARRANTY-One year limited warranty
  • RESPONSABLE MANUFACTURER- ISO9001:2008 certificated Manufacturer ,also Member of Water Quality Association (WQA)

Specification:

Maximum Pressure: 90 psi (6.2 bar) 

Temperature:40-110°F/5-45°C 

Shelf life: 5 Years.

More valuable information:

✪What is dimension of the big housing?

It is 4.5"OD x 20" height .

✪What is in the box?

2pcs 20inch big CLEAR housings with pressure release , 2pcs plastic wrench ,2pcs metal bracket,bracket screws(not include expansion screw).

✪What is filters options?

1.PP spun filter, Remove sand, dirt, sediment. life time:6 months.

2.Carbon block filter, Further remove chlorine, taste & odors, very fine particulates. life time:6 months. PS.The Life Time of the Filter Cartridge Depends on Usage Amount and Feed Water Quality.

Note:

1. Protect filter housing from freezing. Please lubricate the o-ring with silicon grease and use wrench provided to prevent leakage.

2. This filter housing has a maximum operating pressure rating of 90 psi, if you suspect that your water pressure will at any time exceed 80 psi, a pressure regulator MUST BE INSTALLED before the filter housing. this action will guard against the water pressure exceeding the maximum pressure rating.it is recommended that the pressure regulator be set at 70 psi or less.

3.The rubber o-ring provides the water tight seal between the cap and the sump. it is important that the o-ring be properly SEATED IN THE GROOVE of a water leak could occur. 

below is more options and matched filter cartridges:
 
PushAuction