Genuine UV Full Glue Gorilla Curved Liquid Tempered Glass For Samsung Galaxy S10,S10+

Brand New

Comes in a Retail Packaging

Description:-

• This '3D' glass protectors are more difficult to fit than flat screens because they have curved edges and need a different technique to be fitted correctly
• Flat glasses do not cover the curve on these Samsung phones - these glasses are curved and follow the contours of the screen
• Make sure your screen is scrupulously clean and free of dust, grease or moisture
• These glasses self-install like flat screens - where the adhesive forces the air out as it spreads.
• This means that just laying the screen on the phone - as with flat screens - will not cause air bubbles to be locked under the glass provided you follow instructions.
• Line up the glass carefully before allowing the adhesive to touch the screen - a limited amount of touch and go is possible before the adhesive need to be cured with the UV lamp.
• To install properly you need to slowly pull the protective film off the screen  - do not touch the reverse of the screen.
• 
  
• These screen protectors are case friendly. So there is small gap remains between screen protector and edges of the phone.
• Professional installation is required. If you try to install this on your own. you do so at your own risk

Features:-

1. Scratch Resistant UP to 9H (Harder Than Knives)

2.Chemically Enhanced to provide anti-shatter protection.

3.Oleophobic Coated for fingerprint & smudge resistant and easy cleaning.

4.Ultra Thin design to maintain 100% sensitivity and clarity of your touch screen.

5.Silicone Coated surface to ensure hassle free installation and removal.

6. Rounded Edge Design for chip resistant and comfortable grip on your device.

How to Install

Before installation Please wear gloves and don't let Nano Water Liquid to Contact with your skin

1. Use Alcohol pad ( WET) to clean the screen thoroughly

2. Wipe dry with microfiber cleaning cloth (Dry)

3. Open Up the UV Glue Nano Water Bottle Cap

4. Cut the tip off the UV Glue Tube

5. Face Down the tip, this enables UV Glue to flow out

6. Drip the UV Glue Gently centre of the mobile phone

7. Peel of Plastic sheet from tempered glass

8. Match the position. Place tempered glass on UV Glue gently & Slowly, Let the UV Glue flow evenly, make sure no bubbles appear.

9. Wipe Off Excessive UV Glue on the edges with tissue. Before you use UV light

10. Plug  UV Light, once's its on. Move the UV light gently on the full surface of the mobile phone

OR YOU CAN WATCH VIDEO ON YOU TUBE HOW TO APPLY UV GLASS

 You will Get :-