Pulse Argon Spot Welder 400W Welding Jewelry Gold Silver Platinum Palladium Welder

Sparkle Welder can be used to weld:

- Precious metal alloys; gold, silver, platinum and palladium

- Titanium and stainless steel.

- With some limitations, aluminum, tin and most brass alloys

- Alloys with different attributes that are incompatible in normal welding

-Alloys that would oxidize during welding and thus require an inert(Argon) atmosphere

Sparkle welder which use for jeweler:

-Precisely position parts by tacking with the spot welder

-Welding of necklaces with a diameter 0.3mm or larger(smaller diameter may melt)

-Repair metal joints or breaks without removing set stones or pearls

-Repair heat sensitive metals or metal alloys

-Repair surface or entry point of a molding of the same alloy

 

With the inert argon atmosphere, welding can be done without requiring fluxing. The soldering point is smooth and does not require scaling or scale removal.

 

Installation and testing
1.Connecting electrode, black wire to black connection (ground/cathode), red wire to red connection (positive /anode).

2. Connect argon gas through the argon gas pressure reducing valve; adjust the gas pressure reading to the minimum

3. Tungsten needle can be sharpened by grinding on the grinding wheel, or with the use of a Fordham flex shaft or dremal tool and an abrasive disk. Note that you should not use a wheel previously used to grind iron/steel as this will contaminate the needle and cause an uneven spark and/or weld results.

4. When installing the tungsten needle, please insure that the needle is approximately 5mm out from the welding head. The diameter of needle should be 0.1mm.

 

Specifications:

• Power supply:220V/110V, 50/60HZ

• Power:400W

• Ampere for welding:0.5~50A,Continuous adiustable (Fluctuation)

• Weight:about 6kg

• Size:300*170*225mm

Originally the welder is 220V.

If require 110V voltage, pls make a remark and tell supplier.