Simple Introductio:
* Adopt MT7621A solution, MIPS dual-core CPU, the main frequency is up to 880MHZ
* Use independent WIFI chip, 2.4G is MT7603EN, 5.8G is MT7612EN
* 2.4G rate up to 300Mbps, 5.8G rate up to 867Mbps, dual frequency rate is about 1200Mbps
* Using high-speed 256MB DDR3 and 16MB Nor Flash (Max support 32MB Flash+512MB RAM)
* 1 WAN+4 LAN (1000M adaptive network ports, support Auto MDI/MDIX) * Support USB2.0 and TF card slots to expand SMABA or FTP network storage function
* Support "One-click mode"(press the reset button to enter the rescue and flash mode)
* Built-in two 4G PCIe module interfaces
* Two external Nano SIM card (small card) interfaces, both support SIM/USIM card
This is a brand new router independently developed by Cioswi
It can be used as An Ordinary Router,
In addition, it can also be configured with different modules to support different national frequency bands.
Different modules support different Operator.
For USA Country Mainstream module: EC25-AFFA / SIM7600A-H / MC7455.NL668-AM
For EU Country Mainstream Module:EC25E / EP06-E / SIM7600E-H. NL668-EAU
For AU Country Mainstream Module:EC25-AU / SIM7600SA-H,NL668-EAU and So on.
If you have more module requirements, please contact us for inquiries
Please read the product description and parameters carefully.
If you have any questions or need any help, please contact us in time.
This Model is WG1602 With NL668-EAU CAT4 4G Chips/Modem
Main Board MTK7621A+MTK7603EN+MTK7612EN
WG1602 With 16M+256MB 1WAN + 4LAN.
1200Mbps Has PCIE Port Insider Router
NL668-EAU Support Below Frequency Band:
Quectel,CAT4,LTE Module:
FDD:B1/3/5/7/8/20/28
TDD:B38/40/41
WCDMA:B1/5/8
GSM:850/900/1800MHz
Packing List:
1 X WG1602 (With CAT4 4G Chips/Modem)
2 X 2.4G Antennas Cables
2 X 5.8G Antennas
1 X AU Plug
1 X 1M Yellow Cables
1 X Free SIM Cards Cover
Wireless Description :
2.4G wireless: It compatible with IEEE 802.11 b/g/n and support IEEE 802.11 d/h/k; Support 20MHz, 40MHz. Use 2T2R MIMO antenna technology. The maximum connection rate is up to 300Mbps.
5.8G Wireless: It compatible with IEEE 802.11 a/ac and support IEEE 802.11 d/e/h/i/k/r/w; Support 20MHz, 40MHz, 80MHz, Use 2T2R MIMO antenna technology. The maximum connection rate is up to 1200Mbps.
4G Part Introduction: This product has two built-in PCIe interfaces of USB2.0 bus, which can be used to expand the function of 4G mobile communication. The frequency bands depends on the 4G modules. As shown in the "Product Picture" , two 4G modules are each corresponds to two SIM cards. In this way, a dual-module & dual-SIM card can achieve traffic superstition or 4G network backup through software control.
1.Hardware interface
|
1* Wan port, 1000Mbps, Support Auto MDI/MDIX
Protocol: IEEE 802.3/802.3u/802.ab
|
4* Lan ports, 1000Mbps, Support Auto MDI/MDIX
Protocol: IEEE 802.3/802.3u/802.ab
|
USB interface
|
1* USB2.0 slot (Note: USB slot can't work with the second 4G module at the same time)
|
TF Card interface
|
1* Standard TF card interface
|
SIM Card Slot
|
2*Nano SIM Card, Support SIM/USIM
|
Power interface
|
DC5.0*2.1MM port
|
Button
|
1*reset button
|
Antennas
|
2*omnidirectional 5dbi 2.4G & 5.8G dual-band antennas
|
4*omnidirectional 5dbi 4G antennas, compatible with 3G/2G
|
PCIe interface
|
Built-in 2*4G PCIe module interfaces
|
2.Hardware platform
Processor
|
MT7621A MIPS dual-core CPU, 880MHZ main frequency
|
2.4G WIFI Chipset
|
MT7603EN IEEE 802.11n/g/b, Maximum speed 300Mbps
|
5.8G WIFI Chip
|
MT7612EN IEEE 802.11ac/a, Maximum rate 867Mbps
|
Ram
|
DDR3 256MB
|
Flash
|
Nor Flash 16MB
|
3.Working environment requirements
Operating temperature
|
0℃ ~ 40℃
|
Storage temperature
|
-40℃~70℃
|
Working humidity
|
10% ~ 90%RH Non-condensing
|
Storage humidity
|
5% ~90%RH Non-condensing
|