Complete fitting kit to change the original radio in a Range Rover Sport or Discovery 3 with original Harman/Kardon amplified audio system (not LOGIC7) for a Double DIN aftermarket unit and also retain the use of the original nav/vehicle info display screen.

Package Includes

• Fascia With Cage (Matt Black) 
• Steering Control Interface
• Antenna Adapter
• Amplifier Bypass Cable
• Fibre Optic Extension Cable
• Head Unit Relocation Cable
• Universal patch lead (Included)

Compatible with following vehicles:

Car Make / Model	Year	Remarks
Land Rover Discovery	2004 - 2009	III (LR3)
Land Rover Range Rover Sport	2005 - 2009	L320

This kit is for vehicles with the Harman/Kardon audio system and touch screen NAV, will not fit vehicles with Harman/ Kardon Logic 7 audio systems

Fascia Adaptor

This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.

Steering Control Adaptor

A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit. 

This special lead also allows the original head unit to remain connected and relocated in the dashboard, this keeps the original screen above the radio working. This cable fits behind the radio and also allows the original head unit to be relocated behind the dashboard. This screen displays vehicle information and navigation. An additional interface is required to keep the original navigation audio working.

Antenna Adaptor

This cable converts the original antenna connector in the car, known as a Fakra connector, to a standard aftermarket antenna connector, known as a DIN connector. The adapter cable has a built in module which provides a phantom power feed to the original antenna in the car. A phantom power feed is a 12v power supply that is sent up the centre wire of the antenna cable, this powers the amplifier built into the original antenna. The antenna adapter cable has a loose wire which needs to be connected to the 12v antenna power output of the new aftermarket stereo.

Amplifier Bypass Cable

Amplifier bypass cable for Range Rover Sport and Discovery III cars fitted with standard Harman/Kardon amplifier underneath the driver's seat. Allows you to connect a new aftermarket radio directly to the car's speakers after bypassing the original amplifier. A new extra amplifier will be needed to keep the original sub-woofer. Sound to tweeters may be lost.

Universal Patch Lead

Universal patch lead to be used with In car Tec 29- series steering wheel control interfaces. This cable plugs into the ICT control box and connects to the 3.5mm socket or single wire on the back of the new head-unit. This item has loose wires and leads so it can be configured to suit the brand of radio being fitted.

This fitting kit will retain the use of the original navigation and vehicle settings screen, however, the navigation audio will be lost. An additional NAVAMP interface will be required to retain the navigation audio.

A new extra amplifier will be needed to keep the original sub-woofer. NOT FOR LOGIC 7 SYSTEMS

TECHNICAL NOTE:

• CAR AUDIO FITTING ACCESSORIES ARE SOLD WITH LIMITED INSTRUCTIONS. 
• SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPFUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED.

IMPORTANT NOTE: Please make sure that is the correct Fitting Kit for your car by firstly checking to see if your make, model  and year of car is listed in the advert. Secondly by checking to see if  the connection in the picture listed is the same as you have in your vehicle.

PLEASE NOTE: The fascias are made to suit industry standard sized stereos such as Pioneer, Kenwood, Sony, Alpine, JVC etc, NOT INCLUDING China units or unbranded units. 

China units have a reputation to be over sized and may require modification to the fascia to allow it to fit.

We do not take any responsibility for China units not fitting as they are not industry standard size.