Car Audio Single Din Stereo Installation kit for installing a new after market headunit into your Vehicle. This is complete kit including Fascia, Steering Control Interface for Volume Controls on Steering Wheel, Aerial Adaptor and Stereo Removal Keys. 

Package Includes

• Fascia Adaptor (Black) Frame & Pocket
• Steering Control Stalk Adaptor
• Aerial Adaptors
• Stereo Removal Keys
• Stereo Patch Lead (Free CTMULTILEAD.2 Included)

Compatible with following vehicles:

Car Make / Model	Year	Remarks
Citroen Relay	2006 - 2008	(250)

Connection: Mini ISO

ONLY SUITABLE FOR VEHICLES THAT HAVE NO IGNITION SUPPLY FEED WITHIN THE ORIGINAL ISO BLOCK CONNECTION TO THE ORIGINAL RADIO. THE LOCATION ON THE ISO PLUG MUST BE EMPTY IN THE POSITION ON THE PHOTO MARKED IN RED.

THIS KIT SUITS VEHICLES FROM 06 - 08 WITH THE FOLLOWING DASH

Fascia Adaptor

This adaptor will convert the non din-sized aperture left after removing the factory stereo to a single din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.

Aerial Adaptor

An Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit.  

Steering Wheel Interface

A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steering wheel controls or fitted on a stalk next to the steering wheel.  

Stereo Removal Keys

Stereo Removal Keys to remove headunit from the fascia cage. Many OEM manufacturers are incorporating special locking mechanisms into their head units in an attempt to prevent stereo theft. This means that to remove one of these units you will require a manufacturer specific stereo removal key to prevent damage to the head unit or the surrounding fascia and cage.

PATCH LEAD This interface connects a compatible car stereo with a joystick input (blue line-in mini-jack) or wire input on the back of the unit to the existing stalk/steering wheel controls of the vehicle.

Universal head unit connection lead for:

• Alpine (3.5mm jack)
• Beat (single wire connection)
• Chinese / Xtrons / 3 wire unbranded units (3 wire connection)
• Clarion (3.5mm jack)
• JVC (3.5mm or single wire)
• Kenwood (single wire)
• LG (3.5mm jack)
• Nakamichi (single wire connection)
• Panasonic  (single wire but NOT AV units)
• Philips (single wire connection)
• Pioneer (3.5mm jack)
• Sony (3.5mm jack)
• Zenec  (single wire)
• Other Chinese SWC learning head units

Notes:

• You can simply cut the loops / wires to select which brand you are fitting.
• Supplied with instruction sheet

TECHNICAL NOTE:

• CAR AUDIO FITTING ACCESSORIES ARE SOLD WITH LIMITED INSTRUCTIONS. 
• SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPFUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED.

Please note: This patch lead CANNOT be used for Blaupunkt / Parrot / Becker / JVC KW-AVX head units / Older Kenwood units with the DIN plug For those models you need to purchase the lead Separately which can be found in our ebay store.

IMPORTANT NOTE: Please make sure that is the correct Fitting Kit for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle.

FKIT-CITROEN-22