Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.

A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steering wheel controls or fitted on a stalk next to the steering wheel.

Retains steering wheel controls,settings menu indicator and climate controls settings.

Replacing an OEM Head unit in some modern vehicles can lead to some nasty surprises - one of these is the loss of the OE audible parking tones. This interface is ideal when replacing your OE unit with an aftermarket headunit, this interface will allow the parking tones to come back.

Features & Benefits

• Allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steering wheel controls
• Safety: Allows you to keep your hands on the steering wheel and eyes on the road.
• Maintains the original features of the vehicle such as date, time and temperature display
• Choose the relevant head unit connection lead according to the make of aftermarket head unit you wish to fit
• Retains original features of the vehicle such as climate control, parking sensor audio and warning tones
• Please check the connections in the vehicle match the harness you are purchasing

Compatible with following vehicles:

Car Make / Model	Year	Remarks
Vauxhall Astra	2010 - 2015	J
Vauxhall Corsa	2014 - 2019	E
Vauxhall Meriva	2010 - 2017	B
Vauxhall Mokka	2012 - 2020	1st Gen
Vauxhall Zafira Tourer	2011 - 2019

Connection: OEM Specific

Not compatible for vehicles with a large Colour / Navigation screen.

CTMULTILEAD.2 Universal head unit connection lead is suitable for:

• Alpine (3.5mm jack)
• Beat (single wire connection)
• Chinese / Xtrons / 3 wire unbranded units (3 wire connection)
• Clarion (3.5mm jack)
• Grundig
• JVC (3.5mm or single wire)
• Kenwood (single wire)
• LG (3.5mm jack)
• Nakamichi (single wire connection)
• Panasonic  (single wire but NOT AV units)
• Philips (single wire connection)
• Pioneer (3.5mm jack)
• Sony (3.5mm jack)
• Zenec  (single wire)
• Other Chinese SWC learning head units

TECHNICAL NOTE:

• CAR AUDIO FITTING ACCESSORIES ARE SOLD WITH LIMITED INSTRUCTIONS. 
• SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPFUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED.

IMPORTANT NOTE: Please make sure that is the correct Stalk Adaptor for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle.

If the connection in the car is different from what you see in the picture then this adaptor is NOT suitable.