Connects2 SWC.2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.

A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit.

Steering Wheel Control & Warning Tone Interface. Retains OEM Parking Sensor Audio And Warning Tones Such As Oil/Washer Fluid Level, Door Open And Seat Belt. Aerial Included

Included Free CTMULTILEAD.2 Stereo Patch Lead

Features Highlight:

• USB Updateable for latest software version
• Supports pick up & hang up phone buttons
• Works with CAN-Bus
• Park Brake
• Reverse Gear
• Ignition
• Illumination
• Speed Pulse

Compatibility:

Car Make / Model	Year	Radio
BMW 1 Series	2004 - 2013	(E81, E82, E87, E88), BMW Business Professional, Quadlock (Fakra)
BMW 3 Series	2005 - 2012	(E90, E91, E92, E93), BMW Business Professional, Quadlock (Fakra)
BMW 4 Series	2009 - 2016	E89 Model, BMW Business Professional, Quadlock (Fakra)
BMW 5 Series	2004 - 2010	(E60, E61), BMW Business Professional, Quadlock (Fakra)
BMW 6 Series	2003 - 2010	E6* Variants, BMW Business Professional, Quadlock (Fakra)
BMW 7 Series	2001 - 2008	E6* Variants, BMW Business Professional, Quadlock (Fakra)
BMW Mini	2006 - 2013	(R55,R56,R57,R58,R59) CAN-Bus Vehicles, BMW Business Professional, Quadlock (Fakra)
BMW X1	2009 - 2015	E84, BMW Business Professional, Quadlock (Fakra)

Note: Retains OEM parking sensor audio and warning tones such as oil/washer fluid level, door open and seat belt 

Phone Button Support: Supports phone buttons with compatible bluetooth head units

CAN-BUS: Yes

Connection: Quadlock (Fakra)

PATCH LEAD This interface connects a compatible car stereo with a joystick input (blue line-in mini-jack) or wire input on the back of the unit to the existing stalk/steering wheel controls of the vehicle.

Universal head unit connection lead for:

• Alpine (3.5mm jack)
• Beat (single wire connection)
• Chinese / Xtrons / 3 wire unbranded units (3 wire connection)
• Clarion (3.5mm jack)
• Grundig
• JVC (3.5mm or single wire)
• Kenwood (single wire)
• LG (3.5mm jack)
• Nakamichi (single wire connection)
• Panasonic  (single wire but NOT AV units)
• Philips (single wire connection)
• Pioneer (3.5mm jack)
• Sony (3.5mm jack)
• Zenec  (single wire)
• Other Chinese SWC learning head units

Notes:

• You can simply cut the loops / wires to select which brand you are fitting.
• Supplied with instruction sheet

Please note: This patch lead CANNOT be used for Blaupunkt / Parrot / Becker / JVC KW-AVX head units / Older Kenwood units with the DIN plug For those models you need to purchase the lead Separately which can be found in our ebay store.

TECHNICAL NOTE:

• CAR AUDIO FITTING ACCESSORIES ARE SOLD WITH LIMITED INSTRUCTIONS. 
• SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPFUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED.

IMPORTANT NOTE: Please make sure that is the correct  Fitting Kit for your car by firstly checking to see if your make, model  and year of car is listed in the advert. Secondly by checking to see if  the connection in the picture listed is the same as you have in your  vehicle.