Package Includes:

• Double Din Fascia Panel
• Wiring Harness + Aerial Adaptor Lead

Compatible with following vehicles:

Car Make / Model	Year	Remarks
VW Caddy	2004 onwards
VW Eos	2006 onwards
VW Golf V	2003 onwards
VW Golf Plus	2005 onwards
VW Jetta	2006 onwards
VW Passat	2005 onwards
VW Touran	2003 onwards

FASCIA ADAPTOR:

This adaptor will convert the non din-sized aperture left after removing the factory stereo to a double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.

WIRING HARNESS: The wiring harness will allow to install the stereo.  

There is an Aerial Adaptor also included with the Wiring Adaptor.

Please Note

• Red wire has to be connected to a separate ignition feed in the vehicle to make aftermarket head unit to power up
• Orange cable requires connection to illumination wire but only if the radio requires this for dimming purposes at night.
• Blue wire needs to be connected to the Remote Antenna or ignition supply wire (if rem ant wire not available) on back of car stereo.

Please Note:

• When connected your new stereo may not power up, and this is no fault of the wiring harness purchased.
• Audi / VW / Skoda / Fiat and other vehicles tend not to have an ignition switched live feed.
• In these cases it is necessary to manually connect a spurred live feed from fuse box for example to feed switched power so the new stereo turns on and off with the key.
• The wire in particular on the new wiring harness will be the red wire.

  AERIAL ADAPTOR: An Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. 

Note: Blue wire needs to be connected to the Remote Antenna or ignition supply wire (if rem ant wire not available) on back of car stereo.

TECHNICAL NOTE:

• CAR AUDIO FITTING ACCESSORIES ARE SOLD WITH LIMITED INSTRUCTIONS.
• SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED.

IMPORTANT NOTE: Please make sure that is the correct Fitting Kit for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle.

 

PLEASE NOTE:

China units have a reputation to be over sized and may require modification to the fascia to allow it to fit.

We do not take any responsibility for China units not fitting as they are not industry standard size.

If the one supplied with the stereo does not fit the fascia then you must purchase a universal cage which is slightly smaller.

Click here for CT23UN01 UNIVERSAL Mounting Cage