Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit. 

A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit. 

Included Free CTMULTILEAD.2 Stereo Patch Lead

Features Highlight:

• Phone Button Support
• USB Updateable
• CAN-Bus
• Park Brake
• Reverse Gear
• Ignition
• Illumination
• Speed Pulse
• Amp Retention

Compatible with following vehicles:

Car Make / Model	Year	Remarks
Chrysler 200	2011 - 2014
Chrysler 300C	2008 - 2010
Chrysler 300M	2002 - 2004
Chrysler Aspen	2008 - 2009
Chrysler Concorde	2002 - 2004
Chrysler Pacifica	2004 - 2008
Chrysler PT Cruiser	2002 - 2005
Chrysler Sebring	2002 - 2010	(JR/JS)
Chrysler Town & Country	2002 - 2008
Chrysler Voyager	2002 - 2003	(GK/GY/RG)
Dodge Magnum	2005 - 2008
Dodge Journey	2009 - 2010
Dodge Nitro	2007 - 2011
Dodge Intrepid	2002 - 2004
Dodge Caravan	2002 - 2015
Dodge Dakota	2002 - 2011
Dodge Durango	2002 - 2009
Dodge Ram	2002 - 2015	(DR/DH)
Dodge Viper	2003 - 2009
Dodge Stratus	2002 - 2006
Dodge Avenger	2007 - 2015	(JS)
Dodge Caliber	2006 - 2015	(PK)
Dodge Challenger	2008 - 2014
Dodge Charger	2008 - 2010
Jeep Compass	2009 - 2014	Vehicles With OEM Navigation
Jeep Liberty	2002 - 2008
Jeep Patriot	2009 - 2014	(PK)
Jeep Wrangler	2003 - 2010
Jeep Commander	2008 - 2010	(WH)
Jeep Grand Cherokee	2002 - 2010	(WJ/WH)
Mitsubishi Raider	2002 - 2010
VW Routan	2009 - 2015

Connection: OEM Specific

PATCH LEAD This interface connects a compatible car stereo with a joystick input (blue  line-in mini-jack) or wire input on the back of the unit to the existing stalk/steering wheel controls of the vehicle.

CTMULTILEAD.2 Universal head unit connection lead is suitable for:

• Alpine (3.5mm jack)
• Beat (single wire connection)
• Chinese / Xtrons / 3 wire unbranded units (3 wire connection)
• Clarion (3.5mm jack)
• Grundig
• JVC (3.5mm or single wire)
• Kenwood (single wire)
• LG (3.5mm jack)
• Nakamichi (single wire connection)
• Panasonic  (single wire but NOT AV units)
• Philips (single wire connection)
• Pioneer (3.5mm jack)
• Sony (3.5mm jack)
• Zenec  (single wire)
• Other Chinese SWC learning head units

Notes:

• You can simply cut the loops / wires to select which brand you are fitting.
• Supplied with instruction sheet

Please note: This patch lead CANNOT be used for Blaupunkt / Parrot / Becker / JVC KW-AVX head units / Older Kenwood units with the DIN plug. For those models you need to purchase the lead from our eBay Store. Click here for additional patch leads

Technical Note

• CAR AUDIO FITTING ACCESSORIES ARE SOLD WITH LIMITED INSTRUCTIONS. 
• SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPFUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED.

IMPORTANT NOTE: Please make sure that is the correct Stalk Adaptor for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle.

If the connection in the car is different from what you see in the picture then this adaptor is NOT suitable.