Connects2 SWC.2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.

A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit.

Included Free CTMULTILEAD.2 Stereo Patch Lead

Features Highlight:

• USB Updateable for latest software version
• Works with CAN-Bus
• Park Brake
• Reverse Gear
• Ignition
• Illumination
• Speed Pulse
• Vehicle Setting

Compatibility:

Car Make / Model	Year	Remarks
Peugeot 207	2006 - 2012	Blaupunkt/Siemens VDO RD4
Peugeot 208	2012 - 2013
Peugeot 3008	2009 - 2013
Peugeot 307	2005 - 2008
Peugeot 308	2007 - 2013
Peugeot 407	2004 - 2010
Peugeot 5008	2009 - 2013
Peugeot 607	2005 - 2012
Peugeot 807	2005 - 2014
Peugeot Partner	2008 - 2013
Peugeot RCZ	2010 - 2013	Not Compatible With JBL Amplified Systems / Blaupunkt/Siemens VDO RD4
Peugeot Expert	2007 - 2016	(G9/X) Blaupunkt/Siemens VDO RD4

Connection: Quadlock (Fakra)

Please Note: If Your Vehicle Has Rear Parking Sensors and They Work Through The Car Stereo Then You Require The Following Lead For Your Vehicle As The Lead Listed Here is Not Suitable Then. Click Here.

CAN-BUS: Yes

Phone Buttons Support: No

Order RPG001 to retain rear parking sensors.

PATCH LEAD: This interface connects a compatible car stereo with a joystick input (blue  line-in mini-jack) or wire input on the back of the unit to the existing stalk/steering wheel controls of the vehicle.

CTMULTILEAD.2 Universal head unit connection lead is suitable for:

• Alpine (3.5mm jack)
• Beat (single wire connection)
• Chinese / Xtrons / 3 wire unbranded units (3 wire connection)
• Clarion (3.5mm jack)
• Grundig
• JVC (3.5mm or single wire)
• Kenwood (single wire)
• LG (3.5mm jack)
• Nakamichi (single wire connection)
• Panasonic  (single wire but NOT AV units)
• Philips (single wire connection)
• Pioneer (3.5mm jack)
• Sony (3.5mm jack)
• Zenec  (single wire)
• Other Chinese SWC learning head units

Notes:

• You can simply cut the loops / wires to select which brand you are fitting.
• Supplied with instruction sheet

Please note: This patch lead CANNOT be used for Blaupunkt / Parrot / Becker / JVC KW-AVX head units / Older Kenwood units with the DIN plug. For those models you need to purchase the lead from our eBay Store. Click here for additional patch leads

TECHNICAL NOTE:

• CAR AUDIO FITTING ACCESSORIES ARE SOLD WITH LIMITED INSTRUCTIONS. 
• SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPFUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED.

IMPORTANT NOTE: Please make sure that is the correct Stalk Adaptor for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle.

If the connection in the car is different from what you see in the picture then this adaptor is NOT suitable.