DC/AC Clamp Leakage Current Meter Car Dark Current Tester with RS232 Interface
Note: Battery cannot be included during the shipping !!!
Introduction:
1. DC/AC Clamp Leakage Current Meter suitable for measuring AC, DC leakage current below 600V, range: AC/DC 0mA~60.0A, slenderness design of clamp, especially suitable for places with dense flat cable (power metering system, high-speed rail system, automobile circuit maintenance, etc.).
2. Non-contact current measurement, safe and simple operation. The instrument is small size, high accuracy, performance stable and function perfect, which is one of the necessary tools for electrician safety inspection and maintenance.
3. The instrument with data hold, data storage and other functions, can store 99 groups of data, the instrument connect computer by USB interface, storage data can be uploaded to the computer, easy to read, analysis, save, print and so on.
Function:
1. Measurement of AC/DC current, leakage current, Range: 0mA~60.0A
2. Data Storage: 99 groups
3. Line Voltage: below 600V
4. CT Size: 16mm x 18mm
Specification:
CT Size | 16mm×18mm | |
Meter Size | 215mm×61mm×32mm | |
Function | Measurement of car dark current, leakage current and other AC/DC current, leakage current | |
Power Supply | Zn-Mn dry battery 6F22 9V | |
Test Mode | Clamp CT, Non-contact measurement | |
Range | 0mA~60.0A AC/DC | |
Resolution | 1mA AC/DC | |
Accuracy | ±2%rdg±5dgt (23℃±5℃,below 75%rh) | |
Display Mode | 4digits LCD display | |
LCD Dimension | 35mm×21.5mm;display area:32mm×15mm | |
Sampling Rate | about 2 times/s | |
Frequency | AC 45Hz ~ 400Hz | |
Polar Indication | Automatic identification, display "-" symbol | |
Wire Position | The tested wire in the center of the clamp jaw | |
Range Shift | Automatically | |
Line Voltage | Line measurement below DC 600V | |
Interface | With interface, storage data can be uploaded to computer, software monitoring | |
Communication Parameter | Baud rate:9600,data bit 8,stop bit 1,check bit NONE | |
Data Storage | 99units, display FULL symbol indicate storage full | |
Data Hold | Data hold function: DH symbol display | |
Overflow display | Exceed measure range overflow function: OL A symbol display | |
Auto Shut Down | 5 Minutes after power on, the meter shuts down automatically without any operation to reduce battery consumption | |
Battery Voltage | While battery voltage decreases to around 7.2V, will display low battery voltage symbol“ ”, and remind to replace the battery | |
Meter Weight | 180g | |
Working Current | 20mA | |
Working Temperature | -10℃ ~ 50℃, below 80%rh | |
Limit Temperature Error | -10℃~0℃ and 40℃~50℃, the maximum increase in error is 2%rdg | |
Storage Temperature | -10℃ ~60℃,below 70%rh | |
Insulating Strength | AC3700V/rms (between the core and outside shell) | |
Suitable Safety Standard | IEC1010-1、IEC1010-2-032、pollution, etc 2、CAT Ⅲ(600V) | |
Packing:
Package | Outer Package | Carton |
Inner Package | Cloth bag | |
Accessory | Meter | 1 PCS |
Communication Cable | 1 PCS | |
Software CD | 1 COPY | |
Cloth bag | 1 PCS | |
Manual | 1 PCS | |
Certificate | 1 PCS | |
Warranty Card | 1 PCS |