Epever IPower-Plus Off Grid Inverter Sine Wave Inverter 

Can Use For Lithium Battery 

DC12V or 24V or 48V to AC110V or 220V,50hz or 60Hz.

With LCD display and USB and RS485 output.

PS : 

 This inverter is only allowed for stand-alone operation. It is prohibited to connect multiple units in parallel or series; otherwise, the inverter will be damaged.

 This inverter is an off-grid type. It is strictly prohibited to connect the inverter to the grid; otherwise, it will be damaged.

IPower-Plus is a new generation of pure sine wave inverter compatible with the lithium battery system. This new inverter adopts surge current suppression technology to effectively prevent the surge current from damaging the lithium battery cells and BMS (Battery Management System). Also, adopting the voltage and current double closed-loop control algorithm brings the inverter a faster response and better resistance to the load impact. The inverter selects key components with a high power density and long lifespan to provide a stable and reliable power guarantee. The optional communication solutions allow users to monitor the real-time status or change the parameters wherever. The inverter can be widely used in DC to AC areas, such as solar AC power system, vehicle system, RV power supply, security monitoring system, emergency lighting system, field power system, household power system, etc. With an excellent EMC (Electro Magnetic Compatibility) characteristic, the inverter is also suitable for occasions with high power quality requirements.

Features:

Ÿ  Completely electrically isolated design for input and output

Ÿ  Full digital double closed-loop control

Ÿ  Excellent EMC characteristic, widely applied to higher quality power system

Ÿ  Advanced SPWM technology and pure sine wave output.

Ÿ  Input surge current suppression technology, applying to the lithium battery system

Ÿ  Outstanding load resistance to impact, applying to the air conditioners, washing machines, refrigerators, etc.

Ÿ  High power density and high-quality components to ensure the reliability

Ÿ  Output power factor up to 1

Ÿ  Low loss of zero loads and standby. Low THD (Total Harmonic Distortion). High conversion efficiency

Ÿ  Extensive protections: input reverse polarity/under voltage/over voltage, output overload/short circuit/overheating

Ÿ  Air cooling is controlled by temperature and load

Ÿ  Rotatable LCD meter to simplify the system wiring

Ÿ  Friendly LCD meter to simply monitor and parameter configure

Ÿ  Remote control by the phone Apps and PC software

Ÿ  Configurable output voltage and output frequency①

Ÿ  Charging mobile phones, DC fans, and other electrical equipment by the USB port②

Ÿ  Support a variety of options by connecting with the RS485 com. port③

Ÿ  External switch contact design to allow remote control

Ÿ  IEC62109, EN61000, RoHS approved

① Configure the parameters via the local LCD meter, remote LCD meter, phone Apps, and PC software.

② This function is unavailable for inverters with 48V input voltage.

③ There is no communication isolation design for inverters with 12V/24 input voltage. This function(communication isolation design) is just for inverters with 48V input voltage.

• Parameters	IP1000-11-Plus	IP1500-11-Plus	IP2000-11-Plus	IP2000-41-Plus	IP3000-11-Plus	IP4000-41-Plus
  Continuous output power	1000W@35℃@ Rated input voltage	1500W@35℃@ Rated input voltage	2000W@35℃@ Rated input voltage		3000W @ 35℃ @ Rated input voltage	4000W@35℃@Rated input voltage
  Surge power	2000W@5S	3000W@5S	4000W@5S		4800W@5S	8000W@5S
  Surge current when power on	< 100A	< 100A	< 100A	< 50A	< 100A	< 65A
  Output voltage	110VAC (±3%); 120VAC (-7%~+3%)
  Output frequency	50/60Hz ± 0.2%
  Output wave	Pure Sine Wave
  Output distortion THD	THD ≤ 4% (Resistive load)	THD ≤ 4% (Resistive load)	THD ≤ 5% (Resistive load)	THD ≤ 4% (Resistive load)	THD ≤ 4% (Resistive load)	THD ≤ 4% (Resistive load)
  Load power factor	0.2~1(Load power ≤ Continuous output power)
  Rated input voltage	12VDC	12VDC	12VDC	48VDC	12VDC	48VDC
  Input voltage range	10.8~16.0VDC	10.8~16.0VDC	10.8 ~ 16.0VDC	43.2 ~ 64.0VDC	10.8 ~ 16.0VDC	43.2 ~ 64VDC
  Rated output efficiency①	> 87.0%	> 88.0%	> 85.0%	> 88.0%	> 85.0%	> 88.0%
  Max. output efficiency②	> 92.0%	> 93.0%	> 92.0%	> 93.0%	> 93.0%	> 93.0%
  	(40% loads)	(30% loads)	(30% loads)	(30% loads)	(30% loads)	(30% loads)
  Idle current	< 0.2A	< 0.2A	< 0.2A	< 0.1A	< 0.2A	< 0.1A
  No-load current	< 0.8A	< 1.0A	< 1.2A	< 0.5A	< 1.6A	< 0.6A
  USB output	5VDC/Max.1A	5VDC/Max.1A	5VDC/Max.1A	---	5VDC/Max.1A	---
  RS485 com. port	5VDC/200mA
  Mechanical parameters
  Input terminal	M6	M6	M10	M6	M10	M6
  Dimension (L×W×H)	371 × 231.5 × 123mm	387 × 231.5 × 123mm	420 × 231.5 × 123mm	421 × 231.5 × 123mm	550 × 274 × 148mm	521 × 274 × 148mm
  Mounting size	345 × 145mm	361 × 145mm	395 × 145mm	395 × 145mm	525 × 145mm	495 × 145mm
  Mounting hole size	Φ6mm	Φ6mm	Φ6mm	Φ6mm	Φ6mm	Φ6mm
  Net Weight	5kg	6kg	8kg	6.5kg	13kg	12kg

  
  

  
  

• Parameters	IP1000-12-Plus	IP1500-12-Plus	IP2000-12-Plus	IP2000-22-Plus	IP2000-42-Plus	IP3000-12-Plus	IP3000-42-Plus	IP4000-42-Plus	IP5000-42-Plus
  Continuous output power	1000W@35℃@ Rated input voltage	1500W@35℃@ Rated input voltage	2000W@35℃@ Rated input voltage			3000W@35℃@Rated input voltage		4000W@35℃@Rated input voltage	5000W@35℃@Rated input voltage
  Surge power	2000W@5S	3000W@5S	4000W@5S			6000W@5S		8000W@5S	8000W@5S
  Surge current when power on	< 100A	< 100A	< 100A	< 100A	< 50A	< 100A	< 65A	< 65A	< 65A
  Output voltage	220VAC (±3%); 230VAC (-7%~+3%)
  Output frequency	50/60Hz ± 0.2%
  Output wave	Pure Sine Wave
  Output distortion THD	THD ≤ 3% (Resistive load)
  Load power factor	0.2 ~ 1 (Load power ≤ Continuous output power)
  Rated input voltage	12VDC	12VDC	12VDC	24VDC	48VDC	12VDC	48VDC	48VDC	48VDC
  Input voltage range	10.8 ~ 16.0VDC	10.8 ~ 16.0VDC	10.8 ~ 16.0VDC	21.6 ~ 32.0VDC	43.2 ~ 64.0VDC	10.8 ~ 16.0VDC	43.2 ~ 64.0VDC	43.2 ~ 64VDC	43.2 ~ 64.0VDC
  Rated output efficiency①	> 89.0%	> 89.0%	> 88.0%	> 91.0%	> 92.5%	> 87.0%	> 92.5%	> 91.0%	> 91.0%
  Max. output efficiency②	> 93.0% (40% loads)	> 93.0% (30% loads)	> 94.0% (30% loads)	> 93.0% (30% loads)	> 94.5% (30% loads)	> 94.0%(30% loads)	> 94.5%(30% loads)	> 94.0%(30% loads)	> 94.0%(30% loads)
  Idle current	< 0.2A	< 0.2A	< 0.2A	< 0.15A	< 0.1A	< 0.2A	< 0.1A	< 0.1A	< 0.1A
  No-load current	< 1.1A	< 1.2A	< 1.2A	< 1.0A	< 0.5A	< 1.6A	< 0.5A	< 0.6A	< 0.8A
  USB output	5VDC/Max.1A	5VDC/Max.1A	5VDC/Max.1A	5VDC/ Max.1A	---	5VDC/Max.1A	---	---	---
  RS485 com. port	5VDC/200mA
  Mechanical parameters
  Input terminal	M6	M6	M10	M6	M6	M10	M6	M6	M6
  Dimension (L×W×H)	371 × 231.5 × 123mm	387 × 231.5 × 123mm	420 × 231.5 × 123mm	421 × 231.5 × 123mm	421 × 231.5 × 123mm	557 × 231.5 × 123mm	491 × 231.5 × 123mm	516 × 231.5 × 123mm	531 × 231.5 × 123mm
  Mounting size	345 × 145mm	361 × 145mm	395 × 145mm	395 × 145mm	395 × 145mm	532 × 145mm	465 × 145mm	490 × 145mm	505 × 145mm
  Mounting hole size	Φ6mm	Φ6mm	Φ6mm	Φ6mm	Φ6mm	Φ6mm	Φ6mm	Φ6mm	Φ6mm
  Net Weight	5kg	6kg	8kg	6.5kg	6.5kg	10.5kg	7kg	8kg	9kg