You may also like
Product Description
Epever IPower-Plus Off Grid Inverter Sine Wave Inverter
Can Use For Lithium Battery
DC12V or 24V or 48V to AC110V or 220V,50hz or 60Hz.
With LCD display and USB and RS485 output.
PS :
This inverter is only allowed for stand-alone operation. It is prohibited to connect multiple units in parallel or series; otherwise, the inverter will be damaged.
This inverter is an off-grid type. It is strictly prohibited to connect the inverter to the grid; otherwise, it will be damaged.
IPower-Plus is a new generation of pure sine wave inverter compatible with the lithium battery system. This new inverter adopts surge current suppression technology to effectively prevent the surge current from damaging the lithium battery cells and BMS (Battery Management System). Also, adopting the voltage and current double closed-loop control algorithm brings the inverter a faster response and better resistance to the load impact. The inverter selects key components with a high power density and long lifespan to provide a stable and reliable power guarantee. The optional communication solutions allow users to monitor the real-time status or change the parameters wherever. The inverter can be widely used in DC to AC areas, such as solar AC power system, vehicle system, RV power supply, security monitoring system, emergency lighting system, field power system, household power system, etc. With an excellent EMC (Electro Magnetic Compatibility) characteristic, the inverter is also suitable for occasions with high power quality requirements.
Features:
Completely electrically isolated design for input and output
Full digital double closed-loop control
Excellent EMC characteristic, widely applied to higher quality power system
Advanced SPWM technology and pure sine wave output.
Input surge current suppression technology, applying to the lithium battery system
Outstanding load resistance to impact, applying to the air conditioners, washing machines, refrigerators, etc.
High power density and high-quality components to ensure the reliability
Output power factor up to 1
Low loss of zero loads and standby. Low THD (Total Harmonic Distortion). High conversion efficiency
Extensive protections: input reverse polarity/under voltage/over voltage, output overload/short circuit/overheating
Air cooling is controlled by temperature and load
Rotatable LCD meter to simplify the system wiring
Friendly LCD meter to simply monitor and parameter configure
Remote control by the phone Apps and PC software
Configurable output voltage and output frequency①
Charging mobile phones, DC fans, and other electrical equipment by the USB port②
Support a variety of options by connecting with the RS485 com. port③
External switch contact design to allow remote control
IEC62109, EN61000, RoHS approved
① Configure the parameters via the local LCD meter, remote LCD meter, phone Apps, and PC software.
② This function is unavailable for inverters with 48V input voltage.
③ There is no communication isolation design for inverters with 12V/24 input voltage. This function(communication isolation design) is just for inverters with 48V input voltage.
Parameters | IP1000-11-Plus | IP1500-11-Plus | IP2000-11-Plus | IP2000-41-Plus | IP3000-11-Plus | IP4000-41-Plus |
Continuous output power | 1000W@35℃@ Rated input voltage | 1500W@35℃@ Rated input voltage | 2000W@35℃@ Rated input voltage | 3000W @ 35℃ @ Rated input voltage | 4000W@35℃@Rated input voltage | |
Surge power | 2000W@5S | 3000W@5S | 4000W@5S | 4800W@5S | 8000W@5S | |
Surge current when power on | < 100A | < 100A | < 100A | < 50A | < 100A | < 65A |
Output voltage | 110VAC (±3%); 120VAC (-7%~+3%) | |||||
Output frequency | 50/60Hz ± 0.2% | |||||
Output wave | Pure Sine Wave | |||||
Output distortion THD | THD ≤ 4% (Resistive load) | THD ≤ 4% (Resistive load) | THD ≤ 5% (Resistive load) | THD ≤ 4% (Resistive load) | THD ≤ 4% (Resistive load) | THD ≤ 4% (Resistive load) |
Load power factor | 0.2~1(Load power ≤ Continuous output power) | |||||
Rated input voltage | 12VDC | 12VDC | 12VDC | 48VDC | 12VDC | 48VDC |
Input voltage range | 10.8~16.0VDC | 10.8~16.0VDC | 10.8 ~ 16.0VDC | 43.2 ~ 64.0VDC | 10.8 ~ 16.0VDC | 43.2 ~ 64VDC |
Rated output efficiency① | > 87.0% | > 88.0% | > 85.0% | > 88.0% | > 85.0% | > 88.0% |
Max. output efficiency② | > 92.0% | > 93.0% | > 92.0% | > 93.0% | > 93.0% | > 93.0% |
(40% loads) | (30% loads) | (30% loads) | (30% loads) | (30% loads) | (30% loads) | |
Idle current | < 0.2A | < 0.2A | < 0.2A | < 0.1A | < 0.2A | < 0.1A |
No-load current | < 0.8A | < 1.0A | < 1.2A | < 0.5A | < 1.6A | < 0.6A |
USB output | 5VDC/Max.1A | 5VDC/Max.1A | 5VDC/Max.1A | --- | 5VDC/Max.1A | --- |
RS485 com. port | 5VDC/200mA | |||||
Mechanical parameters | ||||||
Input terminal | M6 | M6 | M10 | M6 | M10 | M6 |
Dimension (L×W×H) | 371 × 231.5 × 123mm | 387 × 231.5 × 123mm | 420 × 231.5 × 123mm | 421 × 231.5 × 123mm | 550 × 274 × 148mm | 521 × 274 × 148mm |
Mounting size | 345 × 145mm | 361 × 145mm | 395 × 145mm | 395 × 145mm | 525 × 145mm | 495 × 145mm |
Mounting hole size | Φ6mm | Φ6mm | Φ6mm | Φ6mm | Φ6mm | Φ6mm |
Net Weight | 5kg | 6kg | 8kg | 6.5kg | 13kg | 12kg |
Parameters | IP1000-12-Plus | IP1500-12-Plus | IP2000-12-Plus | IP2000-22-Plus | IP2000-42-Plus | IP3000-12-Plus | IP3000-42-Plus | IP4000-42-Plus | IP5000-42-Plus |
Continuous output power | 1000W@35℃@ Rated input voltage | 1500W@35℃@ Rated input voltage | 2000W@35℃@ Rated input voltage | 3000W@35℃@Rated input voltage | 4000W@35℃@Rated input voltage | 5000W@35℃@Rated input voltage | |||
Surge power | 2000W@5S | 3000W@5S | 4000W@5S | 6000W@5S | 8000W@5S | 8000W@5S | |||
Surge current when power on | < 100A | < 100A | < 100A | < 100A | < 50A | < 100A | < 65A | < 65A | < 65A |
Output voltage | 220VAC (±3%); 230VAC (-7%~+3%) | ||||||||
Output frequency | 50/60Hz ± 0.2% | ||||||||
Output wave | Pure Sine Wave | ||||||||
Output distortion THD | THD ≤ 3% (Resistive load) | ||||||||
Load power factor | 0.2 ~ 1 (Load power ≤ Continuous output power) | ||||||||
Rated input voltage | 12VDC | 12VDC | 12VDC | 24VDC | 48VDC | 12VDC | 48VDC | 48VDC | 48VDC |
Input voltage range | 10.8 ~ 16.0VDC | 10.8 ~ 16.0VDC | 10.8 ~ 16.0VDC | 21.6 ~ 32.0VDC | 43.2 ~ 64.0VDC | 10.8 ~ 16.0VDC | 43.2 ~ 64.0VDC | 43.2 ~ 64VDC | 43.2 ~ 64.0VDC |
Rated output efficiency① | > 89.0% | > 89.0% | > 88.0% | > 91.0% | > 92.5% | > 87.0% | > 92.5% | > 91.0% | > 91.0% |
Max. output efficiency② | > 93.0% (40% loads) | > 93.0% (30% loads) | > 94.0% (30% loads) | > 93.0% (30% loads) | > 94.5% (30% loads) | > 94.0%(30% loads) | > 94.5%(30% loads) | > 94.0%(30% loads) | > 94.0%(30% loads) |
Idle current | < 0.2A | < 0.2A | < 0.2A | < 0.15A | < 0.1A | < 0.2A | < 0.1A | < 0.1A | < 0.1A |
No-load current | < 1.1A | < 1.2A | < 1.2A | < 1.0A | < 0.5A | < 1.6A | < 0.5A | < 0.6A | < 0.8A |
USB output | 5VDC/Max.1A | 5VDC/Max.1A | 5VDC/Max.1A | 5VDC/ Max.1A | --- | 5VDC/Max.1A | --- | --- | --- |
RS485 com. port | 5VDC/200mA | ||||||||
Mechanical parameters | |||||||||
Input terminal | M6 | M6 | M10 | M6 | M6 | M10 | M6 | M6 | M6 |
Dimension (L×W×H) | 371 × 231.5 × 123mm | 387 × 231.5 × 123mm | 420 × 231.5 × 123mm | 421 × 231.5 × 123mm | 421 × 231.5 × 123mm | 557 × 231.5 × 123mm | 491 × 231.5 × 123mm | 516 × 231.5 × 123mm | 531 × 231.5 × 123mm |
Mounting size | 345 × 145mm | 361 × 145mm | 395 × 145mm | 395 × 145mm | 395 × 145mm | 532 × 145mm | 465 × 145mm | 490 × 145mm | 505 × 145mm |
Mounting hole size | Φ6mm | Φ6mm | Φ6mm | Φ6mm | Φ6mm | Φ6mm | Φ6mm | Φ6mm | Φ6mm |
Net Weight | 5kg | 6kg | 8kg | 6.5kg | 6.5kg | 10.5kg | 7kg | 8kg | 9kg |