195mm Valve Collet Remover & Installer Tool - 4.5mm to 7.5mm Valves - Magnetic

Overview:

For quick removal/installation of valve collets, firmly push or tap tool with a hammer, magnet in tool captures collets. Can be used with cylinder head in situ or on work bench. Ideal for replacing broken valve springs or valve stem oil seals without removing the head from the engine. For in situ use, a suitable adaptor (not included) will be required to allow compressed air into the combustion chamber to hold the valve closed while compressing the valve spring.

• For quick removal/installation of valve collets.
• Firmly push or tap tool with a hammer to remove/install, magnet in tool captures collets.
• Can be used with cylinder head in situ or on work bench.
• Ideal for replacing broken valve springs or valve stem oil seals without removing the head from the engine.
• For in situ use, a suitable adaptor (not included) will be required to allow compressed air into the combustion chamber to hold the valve closed while compressing the valve spring.

• Length (mm) - 195mm
• Net Weight - 0.35kg
• Valve Suitability - Ø4.5-7.5mm

We sell a wide variety of tools & workshop equipment for both the DIY and Professional markets. With well over 10,000 lines of equipment suiting all jobs big or small, our online store has it all. If you can't quite find what you are looking for, please feel free to contact us and we'll be more than happy to help.