Laser Dust Particle Counter Air Quality Mointor with USB Flow Rate 6 Liters/min
Introduction:
1. Ultra-thin handheld laser dust particle counter is an instrument used to measure the number and distribution of dust particles per unit volume in the atmosphere.
2. The basic principle is that after the laser is scattered by dust particles, the pulse signal output by the optical sensor is processed by digital signal and the measurement parameters are set, which can monitor the working status of the laser particle sensor.
3. The instrument is designed in accordance with the international standard ISO14644-1 and GMP standards, and can simultaneously detect three particle sizes (the user can set the particle size to be measured at will), and the sampling time is up to 59 minutes and 59 seconds.
4. The built-in flash memory can store up to 1000 sampling data and can be downloaded at high speed via the USB interface.
The instrument has the characteristics of high test accuracy, stable performance, strong versatility, simple and convenient operation, etc., reaching and exceeding all performance indicators of similar products in the world.
5. It is the smallest and thinnest handheld particle counter in the world and can be widely used Production enterprises and scientific research departments such as computer room and indoor environment.
Features:
Application:
Specifications:
Test particle size |
0.3, 0.5, 5.0μm (Users can customize the particle size to be tested in 0.3, 0.5, 0.7, 1.0, 2.0, 2.5, 5.0, 10) |
Consistency loss |
less than 5% when 2,000,000 particles per cubic foot |
Light source |
Laser diode |
Flow rate |
6 liters/minute (0.1cfm) |
Counting efficiency |
100±10%@0.5μm |
Verification standard |
JIS-B-9921(1997) ASTM-F649-01 ASTM-F328-98 (NIST traceable) JJF1190-2008 |
Sampling time |
user-defined (1 second ~ 59 minutes 59 seconds) |
Sampling frequency |
1 to 99 times or continuous |
Alarm level |
1 to 100000 level (FED209E standard) or 2 to 9 level (ISO14644-1 standard) |
Test range |
Class 10~300,000 (corresponding to ISO 4~9) |
Test method |
single/repeat/continuous/timing/average |
Data memory capacity |
438 groups (times) or 1000 measurement data |
Error indication |
The maximum count is exceeded, the laser power is attenuated, the calibration flow rate is exceeded (>±5%), and the battery power is insufficient |
Self-cleaning time |
≤5min |
Interface |
USB |
Maximum communication rate |
12Mbps |
Power source |
Rechargeable Li-ion lithium polymer battery (7.4V/2800mAh) or |
Battery working time |
Continuous test time is greater than 6 hours |
Dimensions |
93 (W) × 46 (D) × 180 (H) mm |
Weight |
less than 950 grams (including battery) |
Environmental conditions |
Working environment: 5~45℃, <90%RH |
Storage environment: |
-20~60℃, <90%RH |
Standard accessories |
AC/DC adapter, isokinetic sampling head, zero filter, portable protective box, application software installation CD (including instructions) |
Optional accessories |
External temperature and humidity sensor, micro printer |