Beschreibung:
- LDO Aluminiumprofile
- LDO Schrittmotoren
- LDO Edelstahlschienen
- LDO PCB Heizelement
- Vorgefertigter Kabelbaum
- Werkzeuge für die heatinserts und weitere für den Aufbau
- Input shaper (ADXL345)
- Phaetus Dragonfly hotend
- BTT SKR Mini E3 V2
- Bondtech Zahnräder für extruder
- Gates 2GT Riemen
Die Sets werden direkt aus deutschem Lager verschickt. Sofern verfügbar, beträgt die Lieferzeit 2-3 Werktage.
BOM:
| Box | Item | Qty. |
| Cable Kit | Power & Misc. Cables | 1 |
| Toolhead PCB Cales | 1 | |
| Breakout PCB Cables | 1 | |
| Heatbed Cables | 1 | |
| Centrifugal Fan, 4020, 24V | 1 | |
| Axial Fan, 4010, 24V | 1 | |
| Axial Fan, 6020, 24V | 1 | |
| AC Inlet, Integrated Switch & Fuse | 1 | |
| Electronics Kit | Mini 12864 Display | 1 |
| Keystone CAT6 Insert | 1 | |
| RaspberryPi 3B+ (OPTIONAL) | 1 | |
| Heatsink for Raspberry Pi | 1 | |
| SD Card, 16GB | 1 | |
| Meanwell RS-25-5 PSU | 1 | |
| Zip Ties, 3x150mm | 100 | |
| Fasteners, Tools & Misc | Machine Screw, BHCS, M8x16 | 8 |
| Machine Screw, SHCS, M5x40 | 6 | |
| Machine Screw, BHCS, M5x30 | 5 | |
| Machine Screw, BHCS, M5x16 | 18 | |
| Machine Screw, BHCS, M5x10 | 60 | |
| Machine Screw, BHCS, M4x8 | 4 | |
| Machine Screw, SHCS, M3x40 | 7 | |
| Machine Screw, SHCS, M3x30 | 28 | |
| Machine Screw, SHCS, M3x25 | 2 | |
| Machine Screw, SHCS, M3x20 | 3 | |
| Machine Screw, SHCS, M3x16 | 12 | |
| Machine Screw, SHCS, M3x12 | 16 | |
| Machine Screw, SHCS, M3x8 | 66 | |
| Machine Screw, BHCS, M3x6 | 6 | |
| Machine Screw, FHCS, M3x6 | 16 | |
| Machine Screw, FHCS, M3x12 | 9 | |
| Self-tapping Screw, M2x10 | 8 | |
| Machine Screw, Wafer head, M3x8 | 4 | |
| Hexnut, M3 | 3 | |
| Locknut, Nyloc, M3 | 4 | |
| Heatset Insert, Brass, M3x5x4 | 54 | |
| T-nut, Roll-in, 2020, M5 | 12 | |
| T-nut, Roll-in, 3030, M5 | 60 | |
| T-nut, Roll-in, 2020, M3 | 13 | |
| T-nut, Roll-in, 3030, M3 | 13 | |
| Washer, M3x7x0.5 | 6 | |
| Shim Washer, M5, 1mm | 19 | |
| Spacer, 6x6x3mm | 9 | |
| Rubber Compressor Foot | 4 | |
| Tape, 3M VHB | 1 | |
| 6x3mm Neodymium Magnet | 10 | |
| Solder Tip, For M3 Brass Insert | 1 | |
| Drill bit, 2mm | 1 | |
| Hex Wrench, 1.5mm | 3 | |
| Hex Wrench, 2mm | 1 | |
| Hex Wrench, 2.5mm | 1 | |
| Hex Wrench, 3mm | 1 | |
| Hex Wrench, 4mm | 1 | |
| Hex Wrench, 5mm | 1 | |
| Slot head screwdriver, 2.5mm | 1 | |
| Teflon Tube (4mm OD 3mm ID) - 1.2m | 1 | |
| Print a Steppy Kit | 1 | |
| Fiberglass Tape, 2x12cm | 1 | |
| Frame Kit | LDO Switchwire Frame Kit (color options) | 1 |
| Linear Rail Kit | Linear Rail 12H 300mm, Stainless Steel LDO-SLR12H-300 | 4 |
| Motor Kit | LDO Switchwire Motor Kit | 1 |
| Panels | Top Rear Panel, Acrylic, Black, 366x270x3mm | 1 |
| Top Clear Panel, Acrylic, Clear, 366x250x3mm | 1 | |
| Side Rear Panel, Acrylic, Black, 441x270x3mm | 2 | |
| Side Clear Panel, Acrylic, Clear, 441x250x3mm | 2 | |
| Rear Panel, Acrylic, Black, 429x360x3mm | 1 | |
| Door Panel, Acrylic, Clear, 433x183x3mm | 2 | |
| Deck Panel, Acrylic, Black, 478x170x3mm | 2 | |
| Bottom Panel, Acrylic, Black, 360x478x3mm | 1 | |
| Toolhead & Motion | Bearing, F695-2RS | 20 |
| Key-bak Super48 13oz | 1 | |
| Pulley, 2GT, 20T, (5mm ID 6mm W) | 3 | |
| Gates Open Belt, 2GT, 6mm | 6 | |
| Thumb Screw Kit | 1 | |
| MR85 Bearing | 2 | |
| Bondtech BMG Parts | 1 | |
| Teflon Tube (4mm OD 2mm ID) - 10cm | 1 | |
| Drag Chain, 10x10mm, R18, 15 links | 1 | |
| Drag Chain, 10x10mm, R18, 18 links | 1 | |
| Drag Chain, 10x10mm, R18, 26 links | 1 | |
| Setscrew, M4x4, Precoated | 8 | |
| Setscrew, M3x2, Precoated | 5 | |
| Buildplate | LDO Switchwire Flex Plate | 1 |
| LDO Switchwire Heated Bed, 24V | 1 | |
| Kapton Tape, Pre-cut 50x50mm | 2 | |
| Aluminium Foil Tape, Pre-cut 35x35mm | 3 | |
| LDO Switchwire Y Carriage | 1 | |
| N/A | Meanwell LRS-350-24 PSU | 1 |
| N/A | C13 Power Cord | 1 |
| N/A | Phaetus Dragonfly Hotend | 1 |
| N/A | BTT SKR mini E3 V2 | 1 |
| N/A | LDO Input Shaper Toolkit | 1 |
| N/A | PVC Wire Duct 20Wx25H | 1 |
| Zip Bag | Thanks Card, check list, stickers | 1 |