FREE P&P UK MAINLAND
- Nourishes & protects all types of interior timber
- Easy to apply
- Non-toxic oil and is completely free from solvent
- Suitable for kitchen work surfaces, chopping boards and interior wood work
Rustin's Pure Tung Oil has a good penetration into all types of timber without leaving a film and its special properties make it highly resistant to water, alcohol and food stuffs. It is additive free and safe for use in contact with food. It forms a hard wearing finish.
Application:
The surface must be clean, bare and sanded smooth and free of all traces of wax. Pure Tung Oil will bring out the natural colour of wood, but if required the colour of the wood may be changed using Wood Dye. If natural open-grain is not required then use Rustins Grain Filler before oiling. Using a clean soft cloth or brush apply generously and allow the oil to penetrate for 20 minutes. Wipe of the excess with a clean soft cloth. The first coat of Rustins Pure Tung Oil can be diluted with 40% white spirit which will further assist penetration into the timber. Do not dilute subsequent coats. This product should dry for 24 hours before further coats are applied. New or bare wood should be oiled 3 times initially but more coats can be applied for extra protection. Two coats are recommended. The oiled surface should be allowed to cure for a few days before use.
Always carry out test on a small area.
Drying Time / Recoating: More than 24 hrs in good conditions.
Coverage: 13 sq. metres per litre per coat.