Moroso Equivalent Self-Vulcanizing Tape, 
Red Oxide 
 10' x 1" Roll 

Self-Vulcanizing Tape 10 Ft Roll x 1 Inch Wide
 
High dielectric strength, high-temperature silicone tape wraps around ignition wire, boots and connectors to provide added insulation 

Extra insulation keeps spark energy contained within the wire, preventing high-voltage leaks and resulting misfire 

Also seals out moisture, while protecting the wire from the harmful effects of oil and excessive heat

Specially formulated silicone rubber vulcanizes automatically, providing adhesion when tape surfaces make contact
 
An excellent alternative to applying shrink sleeves and insulated wire sleeving 

One-inch wide tape packaged in 12-foot rolls

·        Dielectric Strength: 400 volts per mil (vpm)

·        Operating Temperature: -60F to 500F (-51.11C to 260C)

·        Water Absorption 3% Max. by Weight

·        MIL-SPEC: Meets A-A-59163

·        Tensile Strength: 700 psi (Kg/cm 49.226)

·        Elongation: 300%

·        Width & Length 1X10 (2.54000cm X 3.04800m)


Installation Instructions for

Self Vulcanizing Fusing Tape

Installation Instructions:

1. Clean surface that the tape will be applied to.

2. Make two wraps where the tape begins. Spiral the tape with a slight pull to ensure a tight bond.

3. When the area is covered, make two wraps at the end to seal the tape.