Highly robust Heavy Duty Welded Hot Dip Galvanised T & K wall mount brackets with optional U Bolts and fixing kit for the installation of TV aerial and or satellite dish.
The brackets can be easily installed on the wall should you not have a chimney or simply want the convenience of a wall mount.

The brackets are made from 40x40x3mm rugged angle iron with brace straps constructed of 30x30x3mm rugged angle iron for heavy-duty use. 

T&K sizes available: 12'' 18'' 24'' 30" 36 inches 

The Stand-Off for all these T&K brackets is Approximately 2” less than overall length.
After taking the measurement of your clearance add the 2 inches for your ideal T&K bracket.

Features:

• Easier and safer to mount than a Chimney bracket
• Gives a more robust mount especially important for satellite dishes
• Install a satellite dish and an aerial on a single pole
• Heavy Duty Hot Dip Galvanised T and K bracket
• Optional 2 x U Bolts & Nuts
• Optional Sat Wall Fixing Kit

1.75 U Bolts Clamp complete with Nuts for Aerial or Satellite:
1.75 V Bolts are used with various types of wall/chimney brackets for securing masts up to 1.5'' in diameter. TV Aerial & Satellite Pole U Clamp U Bolts.

2.5 U Bolts Clamp complete with Nuts for Aerial or Satellite:
2.5 V Bolts are used with various types of wall/chimney brackets for securing masts up to 2'' in diameter. TV Aerial & Satellite Pole U Clamp U Bolts.

Fixing Kit:
5 x M8 x 50mm Masonry Brick Wall Fixing Screw Bolts & Raw Plugs for securing the bracket to the wall. Requires 10mm drill bit.

* Sizes in inches and cm are approximate

PLEASE NOTE: Metal Wall Brackets include metal parts that are put together and welded, therefore slight discrepancies in the sizes/measurements indicated might occur. Please allow discrepancies between 3mm and 10mm in proportion to the size of the bracket.