Micro Ohm DC Resistance Tester Meter DCR with 1μΩ～3MΩ RS232C Handler Interface
Introduction:
AT510 Micro ohm Meter adopts micro-processor control with high accuracy and wide range. Test range 1μΩ～3MΩ, max reading 30,000 dgts, fast speed of 60 times/second, accuracy of 0.05% still can be reached with speed of 15 times/second, Configurated temperature compensation function. AT510 can be used to test meter resistance accurately. Optional earphone beeper interface. Three kinds current mode can meet all kinds of requirements.
Features:
- High brightness, ultra clear four-color VFD Display.
- Double display: ΔABS/Δ%/Sorting Result
- Zero-setting Function: short circuit zero-setting function
- Comparator Function: Stores up to 30 sets of comparators HI/IN/LOW/GD/NG
- Self-Calibration: Temperature compensation.
- Self-Calibration: Thermoelectromotive force compensation.
- Heavy current test mode(Open voltage <20mV).
- Four-terminal resistance measurement.
- Build-in RS-232C, Handler(EXT-I/O) interface
- Beeper and brightness can be adjusted.
- Internal,Manual,External or Remote Trig.
- GPIB Interface(Optional).
- USB Interface(Optional).
- SCPI compatible command sets.
- Keypad lock function.
- Data Hold function.
Application:
- Suitable for all kinds of high, middle and low resistor
- Contact resistance of the switches
- Contact resistance of all kinds of connector
- Resistance of motor and transformer
- windings,
- Enamel-insulated wire resistance.
- relay/switch connector contacts,
- PCB patterns,
- chip inductor DC resistance.
- Wire Resistance.
- Car,ship and plane fasten or secure resistance.
Specifications:
Parameter | DCR |
Accuracy | 0.05% |
Measurement Range | 1μΩ～3MΩ |
Measurement current | I-Max: <1A Current mode: high current, small current, pulse current |
Range | 9 ranges, Auto , Manual |
Speed | 60 times/s, 15 times/s, 2 times/s |
Display | show,、ΔABS、Δ% sorting result |
Display Max | 30,000 |
Adjustment | short-circuit reset full range |
Comparator | 30 groups comparator, NG-LO,GD-IN,NG-HI display and output, beep adjustable. |
Trigger | Internal, Manual, External, Remote |
Interface | RS232C, Handler, (PLC) |
Temperature compensation | Accuracy: 0.2 °C Range: 0～80 °C |
Method | 4 terminal shielding (2 check terminal & 2 driving terminal), external shielding ground section |
Power Supply | V:：198VAC～240VAC Fre：50Hz Power：15VA |
Dimension & Weight | 216x88x323mm Weight：4kg |
Accessories | ATL501 / ATL801 |
Optional Accessories | ATL620 |
Other Functions | 4 color VFD display , keyboard lock, data hold function |