• Item Description:
  • Item Features
    • Condition:New
    • Placement on Vehicle：Driver Side or Passenger Side
    • Material:steel
    • Fitment type:Direct replacement
    • Weight:12LB
    • Warranty:1 Year
    • Fits either LH (Driver Side) or RH (Passenger Side) FRONT
    • Fits 5 Lugs Wheels
     
  • Vehicle Fitment
    • Fits Volvo V50 2005-2011
    • Fits Volvo S40 2004-2011
    • Fits Volvo C70 2006-2013
    • Fits Volvo C30 2007-2013
     
  • Item Include
    • 2x wheel hub bearing
     
  • When do you need to replace

    • 2x Front Wheel Bearing Hub Kit For 06-13 Volvo C70 07-13 C30 04-11 S40 05-11 V50

    Item Description:

    Item Features

    • Condition:New
    • Placement on Vehicle：Driver Side or Passenger Side
    • Material:steel
    • Fitment type:Direct replacement
    • Weight:12LB
    • Warranty:1 Year
    • Fits either LH (Driver Side) or RH (Passenger Side) FRONT
    • Fits 5 Lugs Wheels

     

    Vehicle Fitment

    • Fits Volvo V50 2005-2011
    • Fits Volvo S40 2004-2011
    • Fits Volvo C70 2006-2013
    • Fits Volvo C30 2007-2013

     

    Item Include

    • 2x wheel hub bearing

     

    When do you need to replace

    • Poor Clicking, snapping or popping
    • Clunking or knocking
    • Rumbling, humming or growling
    • Wobble and/or wheel vibrations
    • Shimmy, shudder, or vibration at constant speeds
    • Abnormal side pulling when applying brakes
    • Uneven or abnormal tire wear
    • ABS failure

    How to Install

    • 1.Loosen the lug nuts on the wheel of the hub bearing you're replacing with the breaking bar and a socket
    • 2.Lift the wheel with the floor jack in a safe and secure manner. Support the vehicle on a jack stand
    • 3.Remove the lug nuts and wheel.Locate the caliper bolts and remove them with the ratchet and a socket.
    • 4.Pry the caliper off gently using a large straight-edged screwdriver and support the caliper on the coil spring with a bungee cord.
    • 5.Locate the caliper bridge bolts (if applicable) and remove them with the ratchet and a socket.
    • 6.Remove any ABS wires attached to the hub bearing assembly (if applicable) or unclip the wire and trace it to the plug. 
    • 7.Remove the spindle nut with the breaking bar and a spindle nut socket. Remove the washer behind the spindle nut.
    • 8.Locate the wheel-bearing assembly bolts behind the knuckle, and loosen them with the breaking bar and socket. 
    • 9.Install the slide hammer onto the lug studs and secure with tightened lug nuts.Sand off the rust and corrosion around the knuckle with a fine- to medium-grade sandpaper. 
    • 10.Place the backing plate in its original position and place the new bearing onto the knuckle. Replace the wheel-bearing assembly bolts. 
    • 11.Replace washer and spindle nut and tighten to proper torque specifications with the half-inch drive torque wrench and spindle socket.
    • 12.Replace the brakes in the same manner you extracted them. the tire and lug nuts, and tighten the lug nuts as tight as you can get them.
    • 13.Lower the vehicle and tighten the lug nuts in an alternate fashion with the torque wrench and socket at the correct wheel nut specifications torque setting.

     

    Note

    • If you have any question about the product, please contact us before buying, we will give you a best reply in time.
    • We are galde to offer quality service and vehicle parts to you, any sale questions please message us before open case or feedback, we will give you the best solution.

     

     

     

     

     


    Item Specifics
    Brand autosuperstar
    Manufacturer Part Number 10036660
    Placement on Vehicle Front
    OE/OEM Part Number 513255
    Type Wheel Hub & Bearing Assembly
    Vintage Car Part No
    Condition New
    Interchange Part Number 1223640, 1326487, 1336139
    Bolt Circle Diameter 4.21 inch
    Brake Pilot Diameter 2.4726 inch
    Items Included 2pcs wheel bearing
    Manufacturer Warranty 1 Year
    Material Steel
    Performance Part No
    Superseded Part Number 30683161, 306831610, 30714492
    Universal Fitment No
    Wheel Pilot Diameter 2.46 inch
    Flange Diameter 5.12 inch
    Hub Pilot Diameter 3.06 inch
    Suface Polished, Rust Protected

    Payment

    We only accept payment through PayPal.

    Shipping

    1.90% packages will be shipped within 24 hours after full payment is received and verified. Delivery Time is about 2-8 business days to most of addresses.

    2.All domestic orders will be shipped via USPS, UPS or FedEx from our US warehouses located in CA or NJ or GA and usually arrives to your door in about 2-8 business days.

    3.We are not responsible for any changed ofaddress after item has been shipped, please verify and update your shipping address on eBay during checkout.

    Policy

    1.All of our brand new items come with 30-day Free Return (Items to be Returned must be in brand new and Resalable Conditons).

    2.Once a problem occurs with the purchased product, please do not hesitate to let us know with messages, we will offer you refund or replacement after checking.

    3.We define the item as defective only if it doesn't function as described. It is the buyer's responsibility to understand the item description before bidding.

    4.We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost.

    5.Buyers are responsible for return shipping charges and is non-refundable if order by mistaken.

    6.Man-made damage by abuse or wrong operation is not covered by this warranty.

    Contact Us

    If there's any question or problem, do contact us please. Our Customer Servicers are always here to answer the question and solve the problem.

    Note

    Please DO check the compatible chart before placing orders to make sure it fits your vehicle.
    If there's any question about the conpatibilities, contact us please.

    Excellent Delivery

    content_src_url

    Shop Category
     Store Home
     Towing Mirrors
     2 pcs Wheel Spacers
     Wheel Hub Bearing
     Heater Core
     4 pcs Wheel Spacers
     Door Handle
     Windshield Wiper Motor
     Fuel Pump
     Air Parking Heater
     Window Regulator
     Throttle Body
     Window Switch
     AC Compressor
     ABS Wheel Speed Sensor
     Roof Rack
     Window Visor
     AC Condenser
     Bumper
     4 pcs Wheel hub Bearing
     Tonneau Cover
     Sun Visor
     A/C Evaporator Core
     Spoiler Wing
     Headlights Assembly
     Fuel Injector
     Dash Cover
     Oil Pan
     Fender Flares
     Center Console
     Timing Belt Kit
     Timing Chain Kit
     Door Lock Actuator
     AC Vent
     Electric Winch Tow
     Detonation Knock Sensor
     Horn
     Other
    Hot Item
    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    New List Item
    2x Front Wheel Bearing Hub Kit For 06-13 Volvo C70 07-13 C30 04-11 S40 05-11 V50

    Item Description:

    Item Features

    • Condition:New
    • Placement on Vehicle：Driver Side or Passenger Side
    • Material:steel
    • Fitment type:Direct replacement
    • Weight:12LB
    • Warranty:1 Year
    • Fits either LH (Driver Side) or RH (Passenger Side) FRONT
    • Fits 5 Lugs Wheels

     

    Vehicle Fitment

    • Fits Volvo V50 2005-2011
    • Fits Volvo S40 2004-2011
    • Fits Volvo C70 2006-2013
    • Fits Volvo C30 2007-2013

     

    Item Include

    • 2x wheel hub bearing

     

    When do you need to replace

    • Poor Clicking, snapping or popping
    • Clunking or knocking
    • Rumbling, humming or growling
    • Wobble and/or wheel vibrations
    • Shimmy, shudder, or vibration at constant speeds
    • Abnormal side pulling when applying brakes
    • Uneven or abnormal tire wear
    • ABS failure

    How to Install

    • 1.Loosen the lug nuts on the wheel of the hub bearing you're replacing with the breaking bar and a socket
    • 2.Lift the wheel with the floor jack in a safe and secure manner. Support the vehicle on a jack stand
    • 3.Remove the lug nuts and wheel.Locate the caliper bolts and remove them with the ratchet and a socket.
    • 4.Pry the caliper off gently using a large straight-edged screwdriver and support the caliper on the coil spring with a bungee cord.
    • 5.Locate the caliper bridge bolts (if applicable) and remove them with the ratchet and a socket.
    • 6.Remove any ABS wires attached to the hub bearing assembly (if applicable) or unclip the wire and trace it to the plug. 
    • 7.Remove the spindle nut with the breaking bar and a spindle nut socket. Remove the washer behind the spindle nut.
    • 8.Locate the wheel-bearing assembly bolts behind the knuckle, and loosen them with the breaking bar and socket. 
    • 9.Install the slide hammer onto the lug studs and secure with tightened lug nuts.Sand off the rust and corrosion around the knuckle with a fine- to medium-grade sandpaper. 
    • 10.Place the backing plate in its original position and place the new bearing onto the knuckle. Replace the wheel-bearing assembly bolts. 
    • 11.Replace washer and spindle nut and tighten to proper torque specifications with the half-inch drive torque wrench and spindle socket.
    • 12.Replace the brakes in the same manner you extracted them. the tire and lug nuts, and tighten the lug nuts as tight as you can get them.
    • 13.Lower the vehicle and tighten the lug nuts in an alternate fashion with the torque wrench and socket at the correct wheel nut specifications torque setting.

     

    Note

    • If you have any question about the product, please contact us before buying, we will give you a best reply in time.
    • We are galde to offer quality service and vehicle parts to you, any sale questions please message us before open case or feedback, we will give you the best solution.

     

     

     

     

     



    We only accept payment through PayPal.

    1.90% packages will be shipped within 24 hours after full payment is received and verified. Delivery Time is about 2-8 business days to most of addresses.

    2.All domestic orders will be shipped via USPS, UPS or FedEx from our US warehouses located in CA or NJ or GA and usually arrives to your door in about 2-8 business days.

    3.We are not responsible for any changed ofaddress after item has been shipped, please verify and update your shipping address on eBay during checkout.

    1.All of our brand new items come with 30-day Free Return (Items to be Returned must be in brand new and Resalable Conditons).

    2.Once a problem occurs with the purchased product, please do not hesitate to let us know with messages, we will offer you refund or replacement after checking.

    3.We define the item as defective only if it doesn't function as described. It is the buyer's responsibility to understand the item description before bidding.

    4.We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost.

    5.Buyers are responsible for return shipping charges and is non-refundable if order by mistaken.

    6.Man-made damage by abuse or wrong operation is not covered by this warranty.

    If there's any question or problem, do contact us please. Our Customer Servicers are always here to answer the question and solve the problem.

    Please DO check the compatible chart before placing orders to make sure it fits your vehicle.
    If there's any question about the conpatibilities, contact us please.


    All rights reserved.