eBay

Selection of highly robust Heavy Duty Welded Hot Dip Galvanised Chimney Brackets available in various sizes with optional lashing kit for the installation of TV FM DAB UHF Radio Aerials and Satellite Dishes .

Sizes available are:
6" x 6'' inches (15cm x 15cm*)
9" x 9'' inches (23cm x 23cm*)
12" x 8'' inches (30cm x 21cm*)
8'' inches Mitre Cradle (21cm*)
13.5'' inches Mitre Cradle (35cm*)
8'' inches Self-Supporting (21cm*)

* Sizes in inches and cm are approximate

PLEASE NOTE: Metal Brackets include metal parts that are put together and welded, therefore slight discrepancies in the sizes/measurements indicated might occur. Please allow discrepancies between 3mm and 10mm in proportion to the size of the bracket.

The Stand-Off for all of these brackets is Approximately 2” less than overall length. After taking the measurement of your clearance add the 2 inches for your ideal chimney bracket.

Features:

Gives a more robust mount especially important for satellite dishes
Install a satellite dish and an aerial on a single pole
Heavy Duty Hot Dip Galvanised wall bracket
Optional Lashing kit

The Lashing Kit is made with heavy-duty galvanised steel and of high quality. The large corner plates add additional solidity and prevent the lashing wire from damaging the chimney mortar. The U bolts are suitable to attach an Aerial or Satellite mast/pole.

1.75 V Bolts are securing masts up to 1.5'' in diameter.

2.5 V Bolts are securing masts up to 2'' in diameter.

Whats included in the lashing kit:

2 x V Bolt
4 x Nuts
4 x Washers
3 x Steel Corner Plates
2 x J bolts
2 x Nuts
1 x Lashing Galvanized Wire Approx. 5m