EC-9999 High Pressure Epoxy Grouting Machine 220V/1100W Epoxy/Polyurethane Foam Injection Pump Crack Repair and Plugging Machine

Product parameter

product code

Name: high pressure grouting machine

Model: EC-9999

Voltage: 220V

Power: 1100W

NOTE FOR GROUTING MACHINE

1. When connecting the high-pressure pipe and connecting rod group to the machine, please wrap it with raw material tape to prevent leakage and blockage.

2. The screw parts of the machine also need to be tightened to prevent the machine from making abnormal noises during high-pressure operations.

3. The motor and the machine need to be fit in place without leaving a gap

4. Since the slurry injected by the machine cannot be in contact with water, it is strictly forbidden to clean or test the machine with water

Cleaning and maintenance:

After the machine is used or during maintenance, please clean and wipe with thinner (such as thinner, engine oil), etc. Pour the thinner into the barrel, put the gun head into the barrel, and clean the power cycle several times to ensure that it is completely cleaned. The thinner is sprayed out and then poured into the oil. The same method is used to cycle and maintain the machine.

Safety Precautions:

When grouting, please wear protective equipment (masks, gloves, goggles, work clothes, rain boots, etc.) to avoid splashing the slurry on the skin when using the grouting machine and accidental contact with the slurry. You must immediately rinse with a lot of water Seek doctor immediately