Renault 20mm Hubcentric wheel spacer kit

These are precision fit  20mm Hubcentric wheel spacers, In this kit you get 2 spacers and 10 extended wheel bolts. These are easy to fit, simply remove your wheel fit the spacers onto the hub (make sure nothing is fowling it onto the hub) and refit the wheel with the longer bolts

The spacers are a nice one piece Forged aluminium with a 5x108 PCD with a centre bore of 60.1mm and the bolts are 47mm Thread Length with a 60d tapered seat 17mm Hex

Bolts are 14x1.5

• Simply unbolt your wheel and remove.
• Wire brush and wipe the bore and wheel hub clean, (must be dirt/rust free)
• Apply a little copper grease or similar to stop the faces sticking together.
• Slide the spacer on to your existing hub.
• Check the spacer is sitting flush against the original hub with no visible gap
• Gently position the wheel on to the spacer spigot taking care not to damage the machined surfaces.
• Secure the wheel with the extended bolts and torque them to the required spec

For Scottish Areas Starting with a AB Postcode we can not send for free, price start from £10 for those areas and above

More spacer kits, spacer's, wheel studs, wheel nuts and Locking Wheel nuts and bolts available in store

If you can't see anything your looking for please ask!

See our feedback for 100% service