Upgraded Version PLA META FDM 3D Printer MaterialPolylactic acid is the gold standard for mostthermoplastic printing applications.Formulated with plant-based materials andpolymers, this non-toxic, low-odor materialdoes not require the use of a heated bed. It is suitable for fast printing and printinglarge-sized models, printed products haveflat and smooth surfaces.
Well Performance High Quality:
|
||||||||||||||||||||||
|
||||||||||||||||||||||
|
||||||||||||||||||||||
SMOOTHLY PRINTING3D printer filaments feature tight tolerances and the highest quality standards to ensure your 3D printer runs trouble-free and delivers outstanding results. Good molding, no bubbles, no clogging and no warping. |
LOW SHRINKAGE RATEThe advantages of JAYO 3D Filaments are high purity, low shrinkage and excellent layer adhesion, which will meet your needs for different Printing Projects. |
RECOMMENDED TEMPERATUREPrinting Speed: 50-100 mm/s Print temperature:180 °C - 200 °C Bed temperature: 60 °C -80 °C for heat bed (Glue is required when not heating) |
||||||||||||||||||||
Tips:
|
PLA META Filament (1.1KG)
1. Environment friendly, non-toxic and biodegradable;
2. Warm colors
3. Low shrinkage;
4. Good strength and rigidity;
5. Toughness, not easy to break
6. The printing temperature is 180~200°. More energy saving.
7. Smooth printing: The printing effect is better than the PLA and PLA+.
8. Drop resistance and impact resistance: After the test, the drop resistance is better than PLA and PLA+.
Suitable for all models of FDM3D printers, suitable for printing handicrafts, artworks and industrial design samples, etc.
parameter
Wire diameter: 1.75mm
Tolerance: ± 0.02MM
Printing temperature: 185-195 ° C.
Bottom plate temperature: glue water is required if it is not heated. No glue water is required for heating from 50-60 ° C
Printing speed: 50-150 MM / s
Air bubbles: 100% zero bubbles
Net weight: 1 kg / roll
Gross weight: 1.3kg / roll
Length: 1.75 mm (1 kg) = 330 m