ENJOY THE BEAUTY AND PRACTICALITY OF A HARD FLOOR, WITHOUT COMPROMISING ON COMFORT |
LuxHeat's wide range of 120v and 240v loose-lay Cables offer the ultimate in design flexibility, allowing for custom configurations and easy installations |
WLAN is Compatible with iPhone, Android and accessible from a web browser |
KIT INCLUDES: |
✔ Heating Cable |
✔ Cable guides/Strapping - Devi by Danfoss |
✔ Cable monitor/alarm - with Batteries |
BEST SUITED FOR: |
★ Residential, Office apartments and Senior living facilities |
★ Installs under tile, stone, marble, laminate and engineered wood floors |
HEATING CABLE FEATURES: |
✔ 10 Year manufacturer’s warranty |
✔ UL listed for USA, classified as safe for Wet Locations |
✔ 12watts/sqft @ 3" spacing provides optimal heat distribution |
✔ Ultra low EMF - Dual conductor Tech, Alu foil sheath and ground wire |
✔ Heater wire is less than1/8” thick, ensures minimal effect on finished floor height |
✔ Ultra low EMF (Electromagnetic Field) Dual conductor Tech, Alu foil sheath and ground wire |
✔ ETFE insulated and covered by tough outer jacket, providing protection against abrasion and corrosion |
THERMOSTAT FEATURES: |
✔ GFCI |
✔ c UL us Listed |
✔ Wifi - Remote access |
✔ Dual Sensing, Dual Voltage |
✔ Retains program memory for 5 years |
✔ Load: 15A-1800w@120v, 3600w@240v |
✔ 3.5” Colour screen with easy interactive Touch control |
✔ 7-Day Program, can be customized to suit one’s lifestyle |
BENEFITS: |
✔ Safe for children, elderly and pets - No hot, exposed or moving parts |
✔ Accurate and intelligent control ensures your personal comfort and affordability |
✔ Out of sight, no unattractive plug-in heaters, no storage hassles, no maintenance and no smell |
WATT DENSITY: |
★ 14.00w/sqft @ 2.6" |
★ 12.00w/sqft @ 3" |
★ 9.00w/sqft @ 4" |
About Us
Prolux Materials LLC is a family owned, American business, focused on delivering quality products throughout the USA.
With production and distribution facilities in both Kentucky and Tennessee, we find ourselves well positioned to meet all logistical demands.
Our Flagship Floor Heating brand, LuxHeat, coupled with OJ Microline’s range of intuitive, energy efficient thermostats, offers the ultimate in Luxury and Comfort, Reliability and Affordability.
Suitable for Most Floor Coverings
BATHROOM
IDEALLY SUITED FOR TILES
Includes porcelain, ceramic, marble and more. Safe for wet areas, including showers.
Important:
Elements MUST be Embedded in Thinset, leveling or self-leveling compound.
BEDROOM
LAMINATE FLOORING
We recommend Installing a Floor sensor to limit floor temperature and protect flooring.
Important:
Elements Must be Embedded in Thinset, leveling or self-leveling compound
KITCHEN
VINYL FLOORING (LVT)
We recommend Installing a Floor sensor to limit floor temperature and protect flooring.
Important:
Elements MUST be Embedded in Thinset, leveling or self-leveling compound.
LIVING ROOM
HARDWOOD FLOORING
Includes Engineered and Solid wood. We recommend Installing a Floor sensor to limit floor temperature and protect flooring.
Important:
Elements MUST be Embedded in Thinset, leveling or self-leveling compound.
Intelligent Heating Systems
If it wasn’t for the cozy warm feeling in the room, you would never know it had been fitted.
Unlike conventional heaters that warm one particular spot, LuxHeat radiant floor heating evenly distributes warmth throughout the floor and up into the room, leaving no uncomfortable cold spots.
The heat is directed where it is most pleasing – the feet – leaving the air we breathe slightly cooler. In fact, the air surrounding our bodies remains slightly cooler than our bodies, preventing that ‘’stuffy’’ feeling so often experienced in a room that is heated by forced air.
Optimal Comfort, Easy Control and Contemporary design
The modern thermostat provides so much more than simple temperature control - it is a personalized and intuitive device designed to give a greater degree of control and comfort in the hands of the user.
The OJ Microline UWG4-4999 WiFi Programmable Touch Screen Thermostat with built-in GFCI is an “all-in-one” intelligent programmable thermostat for radiant floor heating, providing optimal comfort temperatures and energy savings. Designed and manufactured by OJ Electronics – Denmark.
A typical Installation
1. Plan cable layout and prepare floor.
2. Fit strapping to sub-floor and run cable.
3. Cover cables with Thinset or leveling compound. |
4. Complete floor installation and connect thermostat.
This Kit Includes
LuxHeat Floor Heating Cable
LuxHeat cables can be installed as a primary or secondary heat source, it doesn't have to be below Zero to enjoy a warm floor. Our wide range of loose-lay/ free-form underfloor heating cables offer the ultimate in design flexibility, allowing for custom configurations and easy installations.
Be sure to calculate the correct floor area as heating cables CANNOT be cut or shortened. Heating wires MUST be embedded in a Self-leveling underlayment or Thinset.
UWG4-4999 Programmable Thermostat
The UDG Thermostat can be configured for control of Floor Temperature, Room Temperature, or Room Temperature with Floor Temperature Limiting - providing optimal comfort levels while ensuring floor coverings do not exceed recommended temperatures.
Thermostat box Includes 15ft Floor Sensor.
The UDG offers all the necessary functions to ensure easy installation and temperature control, for every floor type. Accurate and intelligent control reduces running costs and ensures personal comfort.
LuxHeat Monitor
The LuxHeat Monitor is designed to measure the heating cable’s continuity during installation.
If the heating cable is cut or damaged during installation the Monitor will immediately alert the installer by means of a loud alarm and red flashing light. We still recommend an ohms test is carried out before, during and after installation.
If the alarm sounds we suggest contacting a professional to identify the damaged area and make the repair.
LuxHeat Cable Guides/Strapping
LuxHeat’s low profile, Strapping/Cable Guides, are specially designed to secure floor heating cables to the sub-floor, the Guides can be fixed to timber, concrete or tile backer boards.
If possible, we always recommend running cables down the length of the room, as this reduces installation time and minimizes strapping. For larger rooms, install additional strapping at 3-4 foot intervals, this will keep your wires from moving while applying Thinset or levelling compounds.
|