CROWN - XLi 2500 - AMPLIFICATEUR DE SONORISATION

Le Crown XLi 2500 possede 3 modes de fonctionnment : Stéréo, Parallele et Bridge Mono. Les entrées sont en XLR symétriques et RCA asymétriques avec selecteur de niveau :0.775V / 1.4V
Sortie sur prises SpealOn et Bornier. En face avant : 2 potentiomentres de volume, Inter de mise en marche et pour chaque canal 6 Leds pour visualisation du niveau de signal/clip/protection.
Protection contre les court-circuits, interferences radio, charge...

Caractéristiques

• 2 x 750 watts RMS / 4 ohms 
• 2 x 500 watts RMS / 8 ohms 
• 1 x 1500 Watts en mode mono bridge sous 8 ohms 
• Entrées symétrique sur XLR + Assymétriques sur RCA 
• Sorties sur Speakon + borniers 
• Voyants Mise sous tension, signal, clip, protection 
• Ventilation forcée 
• Toutes protections 
• Dimensions : 19" 2U

CROWN - XLi 2500 - Power Amplifier

The Crown XLi 2500 is a PA Power Amplifier, offering 750 Watts per Channel @ 4 Ohms. The XLI Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. All four models in the series are powerful, rugged and reliable. They are suited for musicians, DJs, and entertainers as well as houses of worship, discos, and pubs. The four models in the series are the XLi800, XLi1500, XLi2500 and XLi-3500. They are identical except for output power. Features include RCA and XLR inputs, user selectable input sensitivity of 0.755V or 1.4V, Speakon and binding post outputs, stereo/parallel/bridge-mono mode, power/fault/signal presence/clip indicators, forced-air cooling; and protection against shorts, no-load, on/off thumps and radio-frequency interference. With over six decades of experience designing and building rock-solid products, Crown is the standard in amplifier technology. So check out the affordable Crown XLI Series. They are a powerful argument for quality and value!

Features :

• Stereo/parallel/bridge-mono mode 
• User selectable input sensitivity - 0.775V and 1.4V 
• Electronically balanced RCA & XLR inputs; binding post and Speakon outputs 
• Efficient forced-air cooling prevents excessive thermal buildup 
• Electronically balanced RCA & XLR inputs; binding post and Speakon outputs 
• Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and 
• fault for each channel 
• Protection against shorts, no-load, on/off thumps and radio-frequency interference 
• Channels: 2 
• Signal to Noise Ratio (below rated power 20Hz below rated power 20Hz to 20kHz, A-Weighted): > 100 dB 
• Total Harmonic Distortion (THD) (20Hz - 20kHz): < 0.5 % 
• Intermodulation Distortion (60 Hz and 7 kHz at 4:1 from full rated output to -40 dB): =/< 0.35% 
• Frequency Response (at 1W, 20 Hz - 20 kHz): 0 dB, -1 dB 
• Crosstalk (below rated power): at 1 kHz: -75 dB, at 20 kHz: - 59 dB 
• Damping Factor (from 10Hz to 400Hz, 8 ohms load): > 200 
• 750 W / 4 Ohm Stereo (per channel) 
• 500 W / 8 Ohm Stereo (per channel) 
• 1500 W / Bridge Mono 
• Dimension (H x W x D): 3.5" x 19" x 12.4" (89 x 482 x 315mm) 
• Net Weight: 29.7 lb (13.5 kg)

CROWN - XLi 2500 - Power Amplifier

The Crown XLi 2500 is a PA Power Amplifier, offering 750 Watts per Channel @ 4 Ohms. The XLI Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. All four models in the series are powerful, rugged and reliable. They are suited for musicians, DJs, and entertainers as well as houses of worship, discos, and pubs. The four models in the series are the XLi800, XLi1500, XLi2500 and XLi-3500. They are identical except for output power. Features include RCA and XLR inputs, user selectable input sensitivity of 0.755V or 1.4V, Speakon and binding post outputs, stereo/parallel/bridge-mono mode, power/fault/signal presence/clip indicators, forced-air cooling; and protection against shorts, no-load, on/off thumps and radio-frequency interference. With over six decades of experience designing and building rock-solid products, Crown is the standard in amplifier technology. So check out the affordable Crown XLI Series. They are a powerful argument for quality and value!

Features :

• Stereo/parallel/bridge-mono mode 
• User selectable input sensitivity - 0.775V and 1.4V 
• Electronically balanced RCA & XLR inputs; binding post and Speakon outputs 
• Efficient forced-air cooling prevents excessive thermal buildup 
• Electronically balanced RCA & XLR inputs; binding post and Speakon outputs 
• Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and 
• fault for each channel 
• Protection against shorts, no-load, on/off thumps and radio-frequency interference 
• Channels: 2 
• Signal to Noise Ratio (below rated power 20Hz below rated power 20Hz to 20kHz, A-Weighted): > 100 dB 
• Total Harmonic Distortion (THD) (20Hz - 20kHz): < 0.5 % 
• Intermodulation Distortion (60 Hz and 7 kHz at 4:1 from full rated output to -40 dB): =/< 0.35% 
• Frequency Response (at 1W, 20 Hz - 20 kHz): 0 dB, -1 dB 
• Crosstalk (below rated power): at 1 kHz: -75 dB, at 20 kHz: - 59 dB 
• Damping Factor (from 10Hz to 400Hz, 8 ohms load): > 200 
• 750 W / 4 Ohm Stereo (per channel) 
• 500 W / 8 Ohm Stereo (per channel) 
• 1500 W / Bridge Mono 
• Dimension (H x W x D): 3.5" x 19" x 12.4" (89 x 482 x 315mm) 
• Net Weight: 29.7 lb (13.5 kg)

CROWN - XLi 2500 - Power Amplifier

The Crown XLi 2500 is a PA Power Amplifier, offering 750 Watts per Channel @ 4 Ohms. The XLI Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. All four models in the series are powerful, rugged and reliable. They are suited for musicians, DJs, and entertainers as well as houses of worship, discos, and pubs. The four models in the series are the XLi800, XLi1500, XLi2500 and XLi-3500. They are identical except for output power. Features include RCA and XLR inputs, user selectable input sensitivity of 0.755V or 1.4V, Speakon and binding post outputs, stereo/parallel/bridge-mono mode, power/fault/signal presence/clip indicators, forced-air cooling; and protection against shorts, no-load, on/off thumps and radio-frequency interference. With over six decades of experience designing and building rock-solid products, Crown is the standard in amplifier technology. So check out the affordable Crown XLI Series. They are a powerful argument for quality and value!

Features :

• Stereo/parallel/bridge-mono mode 
• User selectable input sensitivity - 0.775V and 1.4V 
• Electronically balanced RCA & XLR inputs; binding post and Speakon outputs 
• Efficient forced-air cooling prevents excessive thermal buildup 
• Electronically balanced RCA & XLR inputs; binding post and Speakon outputs 
• Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and 
• fault for each channel 
• Protection against shorts, no-load, on/off thumps and radio-frequency interference 
• Channels: 2 
• Signal to Noise Ratio (below rated power 20Hz below rated power 20Hz to 20kHz, A-Weighted): > 100 dB 
• Total Harmonic Distortion (THD) (20Hz - 20kHz): < 0.5 % 
• Intermodulation Distortion (60 Hz and 7 kHz at 4:1 from full rated output to -40 dB): =/< 0.35% 
• Frequency Response (at 1W, 20 Hz - 20 kHz): 0 dB, -1 dB 
• Crosstalk (below rated power): at 1 kHz: -75 dB, at 20 kHz: - 59 dB 
• Damping Factor (from 10Hz to 400Hz, 8 ohms load): > 200 
• 750 W / 4 Ohm Stereo (per channel) 
• 500 W / 8 Ohm Stereo (per channel) 
• 1500 W / Bridge Mono 
• Dimension (H x W x D): 3.5" x 19" x 12.4" (89 x 482 x 315mm) 
• Net Weight: 29.7 lb (13.5 kg)

CROWN - XLi 2500 - Power Amplifier

The Crown XLi 2500 is a PA Power Amplifier, offering 750 Watts per Channel @ 4 Ohms. The XLI Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. All four models in the series are powerful, rugged and reliable. They are suited for musicians, DJs, and entertainers as well as houses of worship, discos, and pubs. The four models in the series are the XLi800, XLi1500, XLi2500 and XLi-3500. They are identical except for output power. Features include RCA and XLR inputs, user selectable input sensitivity of 0.755V or 1.4V, Speakon and binding post outputs, stereo/parallel/bridge-mono mode, power/fault/signal presence/clip indicators, forced-air cooling; and protection against shorts, no-load, on/off thumps and radio-frequency interference. With over six decades of experience designing and building rock-solid products, Crown is the standard in amplifier technology. So check out the affordable Crown XLI Series. They are a powerful argument for quality and value!

Features :

• Stereo/parallel/bridge-mono mode 
• User selectable input sensitivity - 0.775V and 1.4V 
• Electronically balanced RCA & XLR inputs; binding post and Speakon outputs 
• Efficient forced-air cooling prevents excessive thermal buildup 
• Electronically balanced RCA & XLR inputs; binding post and Speakon outputs 
• Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and 
• fault for each channel 
• Protection against shorts, no-load, on/off thumps and radio-frequency interference 
• Channels: 2 
• Signal to Noise Ratio (below rated power 20Hz below rated power 20Hz to 20kHz, A-Weighted): > 100 dB 
• Total Harmonic Distortion (THD) (20Hz - 20kHz): < 0.5 % 
• Intermodulation Distortion (60 Hz and 7 kHz at 4:1 from full rated output to -40 dB): =/< 0.35% 
• Frequency Response (at 1W, 20 Hz - 20 kHz): 0 dB, -1 dB 
• Crosstalk (below rated power): at 1 kHz: -75 dB, at 20 kHz: - 59 dB 
• Damping Factor (from 10Hz to 400Hz, 8 ohms load): > 200 
• 750 W / 4 Ohm Stereo (per channel) 
• 500 W / 8 Ohm Stereo (per channel) 
• 1500 W / Bridge Mono 
• Dimension (H x W x D): 3.5" x 19" x 12.4" (89 x 482 x 315mm) 
• Net Weight: 29.7 lb (13.5 kg)