TASCAM - DR-10CS

Enregistreur Micro PCM avec Jack norme SENNHEISER

Les enregistreurs de la gamme DR-10C se connectent à votre micro cravate, créant un système d'enregistrement compact se fixant sur un émetteur de poche (belt pack). Le modèle DR-10CS est conçu pour des microphones Sennheiser. Un kit optionnel est disponible pour les micros Sony/Ramsa (AK-DR10CR).

Les enregistreurs DR-10C possèdent des entrées et des sorties, ce qui permet de les utiliser indifféremment en autonome ou avec un émetteur HF. Utilisé avec un émetteur, l'appareil sert de backup, son enregistrement n'étant pas affecté par d'éventuels dropouts HF. Dans le cas de conférences ou de services religieux, le DR-10C permet d'enregistrer tout le programme avant son passage par la sonorisation. Et dans le cadre d'événements tels que des mariages ou de la télé-réalité, le DR-10C est un système d'enregistrement compact pour les micros portés sur le corps.

Très léger, le DR-10C offre une autonomie de plusieurs heures sur une seule pile AAA (LR03). Il enregistre sur carte microSD standard. Ses fonctions d'enregistrement incluent un réglage de gain automatique et un filtre passe-haut, pour une utilisation simple. Son mode Dual Recording enregistre une version "de sécurité" de votre signal audio : en cas de distorsion, vous disposez toujours d'une version enregistrée moins fort. Lorsque vous enregistrez plusieurs enregistreurs simultanément, un signal infrarouge permet de synchroniser les paramètres entre eux.

Caractéristiques techniques :

• Micro-enregistreur PCM linéaire pour micros cravate
• Peut s’intercaler entre un micro cravate et un émetteur HF, pour assurer un enregistrement de secours
• Enregistrement sur carte microSD/microSDHC (capacité jusqu’à 32 Go)
• Enregistrement mono/poly à une fréquence d’échantillonnage de 44,1/48 kHz et une résolution de 16/24 bits
• Le format BWF (WAV) permet d’inclure un marquage temporel des fichiers audio
• Enregistrement et lecture de fichiers au format MP3 : fréquence d’échantillonnage: 44,1/48 kHz, résolution: 16/24 bits, débit binaire: 128/192 kbit/s (enregistrement), 32–320 kbit/s (lecture)
• La fonction Dual Recording permet d’enregistrer séparément deux versions du fichier, de niveaux différents, ce qui permet de bénéficier d’une piste de secours en cas de distorsion sur l’enregistrement "principal" (réduction de niveau pour l'enregistrement secondaire sélectionnable –6/–12 dB)
• Fonction de verrouilage (Hold), évitant toute extinction accidentelle de l’enregistreur
• Limiteur commutable afin d’éviter tout écrêtage
• Filtre passe-haut commutable, pour atténuer les bruits parasites indésirables dans le grave
• Fonction Auto gain
• Fonction Time Track, incrémentation automatique du numéro de piste à l’issue d’une durée programmable (décastivable)
• Fonction Playback, pour vérification des enregistrements au casque
• Sortie casque
• Horloge intégrée, pour horodatage automatique des fichiers d’enregistrement
• Afficheur OLED, excellente visibilité
• Connecteur de type Micro USB-B, assurant un transfert facile des données audio vers/depuis un ordinateur
• Alimentation par 1 seule pile ou accumulateur de type AAA (LR03), ou via la connexion USB
• Plus de 8 heures d’enregistrement avec une seule pile AAA (LR03)
• Les paramètres d’utilisation se créent dans un fichier texte sur ordinateur, le transfert sur le DR-10C s’effectuant via USB
• Communication de données via infrarouge, permettant de transférer des informations de paramétrage vers d’autres enregistreurs DR-10C
• Communication de données via infrarouge, permettant de transférer des informations de paramétrage vers d’autres enregistreurs DR-10C
• Update de firmware possible via la carte microSD

TASCAM - DR-10CS

The Tascam DR-10CS connects to your Sennheiser lavalier microphone to create a compact recording system that is ideal suited to events where mobility is needed such as weddings, TV and theater productions

he DR-10CS recorder features both input and output connections, allowing the device to be used either standalone, or with a wireless transmitter. When used with a transmitter, the unit acts as a backup to protect against wireless dropouts during recording.

Recording features include auto-gain and a low-cut filter for simple setup. The DR-10CS's dual recording feature records a safety track of your audio at a lower level, so you have a backup in case of distortion. When multiple units are used, an infrared signal can synchronize settings between recorders.

Features

• Micro Linear PCM Recorder for Wireless Beltpacks
• 48kHz/24-bit mono digital recording
• Uses standard microSD/microSDHC card media (up to 32GB)
• Dual Recording feature captures a safety track in case of distortion
• Hold function prevents accidentally switching off the recorder (All keys cannot operate during recording)
• Limiter and low-cut filter on input
• Auto gain control
• Records BWF file timestamped with time of day clock
• Time Track increment function writes new track after a preset amount of time. (There is on/off setting, but the time is 15 minutes fixed when turn it on)
• OEL display for easy visibility in any light condition
• More than 8hours recording on a single AAA battery
• Settings can be created with text file on PC and transferred to DR-10CS via USB connection
• Specifications
• Recording Media: microSD card (64 MB to 2 GB), microSDHC card (4 to 32 GB)
• SD Card Slot: Push-Push type (Guard cover mounted)
• Recording Format: WAV (BWF)
• Sampling Frequency: 48 kHz
• Bit Rate: 24-bit
• Channels: 1 (mono)
• Analog Audio Input: 1/8'' (3.5 mm) TRS jack with screw-lock (For Sennheiser lavalier microphones)
• Mic Input: Mic Input Gain: Low, Mid, High
• Headphones: 1/8'' (3.5 mm) stereo mini jack (dual mono operation)
• USB Connector: Micro-B type (4 pin) Maximum Output: USB 2.0 high speed mass storage
• Power: 1x AAA battery (alkaline or NiMH) USB bus power
• Battery Operating Time: Alkaline Battery (EVOLTA): About 10 hours
• RTC Battery: 1x lithium (soldered in)
• Dimensions (WxHxD): 2 x 2.2 x 1'' (52 x 55.6 x 24.4 mm)
• Weight: 2.2 oz (63 g) with batteries, 1.8 oz (51 g) without batteries

TASCAM - DR-10CS

The Tascam DR-10CS connects to your Sennheiser lavalier microphone to create a compact recording system that is ideal suited to events where mobility is needed such as weddings, TV and theater productions

he DR-10CS recorder features both input and output connections, allowing the device to be used either standalone, or with a wireless transmitter. When used with a transmitter, the unit acts as a backup to protect against wireless dropouts during recording.

Recording features include auto-gain and a low-cut filter for simple setup. The DR-10CS's dual recording feature records a safety track of your audio at a lower level, so you have a backup in case of distortion. When multiple units are used, an infrared signal can synchronize settings between recorders.

Features

• Micro Linear PCM Recorder for Wireless Beltpacks
• 48kHz/24-bit mono digital recording
• Uses standard microSD/microSDHC card media (up to 32GB)
• Dual Recording feature captures a safety track in case of distortion
• Hold function prevents accidentally switching off the recorder (All keys cannot operate during recording)
• Limiter and low-cut filter on input
• Auto gain control
• Records BWF file timestamped with time of day clock
• Time Track increment function writes new track after a preset amount of time. (There is on/off setting, but the time is 15 minutes fixed when turn it on)
• OEL display for easy visibility in any light condition
• More than 8hours recording on a single AAA battery
• Settings can be created with text file on PC and transferred to DR-10CS via USB connection
• Specifications
• Recording Media: microSD card (64 MB to 2 GB), microSDHC card (4 to 32 GB)
• SD Card Slot: Push-Push type (Guard cover mounted)
• Recording Format: WAV (BWF)
• Sampling Frequency: 48 kHz
• Bit Rate: 24-bit
• Channels: 1 (mono)
• Analog Audio Input: 1/8'' (3.5 mm) TRS jack with screw-lock (For Sennheiser lavalier microphones)
• Mic Input: Mic Input Gain: Low, Mid, High
• Headphones: 1/8'' (3.5 mm) stereo mini jack (dual mono operation)
• USB Connector: Micro-B type (4 pin) Maximum Output: USB 2.0 high speed mass storage
• Power: 1x AAA battery (alkaline or NiMH) USB bus power
• Battery Operating Time: Alkaline Battery (EVOLTA): About 10 hours
• RTC Battery: 1x lithium (soldered in)
• Dimensions (WxHxD): 2 x 2.2 x 1'' (52 x 55.6 x 24.4 mm)
• Weight: 2.2 oz (63 g) with batteries, 1.8 oz (51 g) without batteries

TASCAM - DR-10CS

The Tascam DR-10CS connects to your Sennheiser lavalier microphone to create a compact recording system that is ideal suited to events where mobility is needed such as weddings, TV and theater productions

he DR-10CS recorder features both input and output connections, allowing the device to be used either standalone, or with a wireless transmitter. When used with a transmitter, the unit acts as a backup to protect against wireless dropouts during recording.

Recording features include auto-gain and a low-cut filter for simple setup. The DR-10CS's dual recording feature records a safety track of your audio at a lower level, so you have a backup in case of distortion. When multiple units are used, an infrared signal can synchronize settings between recorders.

Features

• Micro Linear PCM Recorder for Wireless Beltpacks
• 48kHz/24-bit mono digital recording
• Uses standard microSD/microSDHC card media (up to 32GB)
• Dual Recording feature captures a safety track in case of distortion
• Hold function prevents accidentally switching off the recorder (All keys cannot operate during recording)
• Limiter and low-cut filter on input
• Auto gain control
• Records BWF file timestamped with time of day clock
• Time Track increment function writes new track after a preset amount of time. (There is on/off setting, but the time is 15 minutes fixed when turn it on)
• OEL display for easy visibility in any light condition
• More than 8hours recording on a single AAA battery
• Settings can be created with text file on PC and transferred to DR-10CS via USB connection
• Specifications
• Recording Media: microSD card (64 MB to 2 GB), microSDHC card (4 to 32 GB)
• SD Card Slot: Push-Push type (Guard cover mounted)
• Recording Format: WAV (BWF)
• Sampling Frequency: 48 kHz
• Bit Rate: 24-bit
• Channels: 1 (mono)
• Analog Audio Input: 1/8'' (3.5 mm) TRS jack with screw-lock (For Sennheiser lavalier microphones)
• Mic Input: Mic Input Gain: Low, Mid, High
• Headphones: 1/8'' (3.5 mm) stereo mini jack (dual mono operation)
• USB Connector: Micro-B type (4 pin) Maximum Output: USB 2.0 high speed mass storage
• Power: 1x AAA battery (alkaline or NiMH) USB bus power
• Battery Operating Time: Alkaline Battery (EVOLTA): About 10 hours
• RTC Battery: 1x lithium (soldered in)
• Dimensions (WxHxD): 2 x 2.2 x 1'' (52 x 55.6 x 24.4 mm)
• Weight: 2.2 oz (63 g) with batteries, 1.8 oz (51 g) without batteries

TASCAM - DR-10CS

The Tascam DR-10CS connects to your Sennheiser lavalier microphone to create a compact recording system that is ideal suited to events where mobility is needed such as weddings, TV and theater productions

he DR-10CS recorder features both input and output connections, allowing the device to be used either standalone, or with a wireless transmitter. When used with a transmitter, the unit acts as a backup to protect against wireless dropouts during recording.

Recording features include auto-gain and a low-cut filter for simple setup. The DR-10CS's dual recording feature records a safety track of your audio at a lower level, so you have a backup in case of distortion. When multiple units are used, an infrared signal can synchronize settings between recorders.

Features

• Micro Linear PCM Recorder for Wireless Beltpacks
• 48kHz/24-bit mono digital recording
• Uses standard microSD/microSDHC card media (up to 32GB)
• Dual Recording feature captures a safety track in case of distortion
• Hold function prevents accidentally switching off the recorder (All keys cannot operate during recording)
• Limiter and low-cut filter on input
• Auto gain control
• Records BWF file timestamped with time of day clock
• Time Track increment function writes new track after a preset amount of time. (There is on/off setting, but the time is 15 minutes fixed when turn it on)
• OEL display for easy visibility in any light condition
• More than 8hours recording on a single AAA battery
• Settings can be created with text file on PC and transferred to DR-10CS via USB connection
• Specifications
• Recording Media: microSD card (64 MB to 2 GB), microSDHC card (4 to 32 GB)
• SD Card Slot: Push-Push type (Guard cover mounted)
• Recording Format: WAV (BWF)
• Sampling Frequency: 48 kHz
• Bit Rate: 24-bit
• Channels: 1 (mono)
• Analog Audio Input: 1/8'' (3.5 mm) TRS jack with screw-lock (For Sennheiser lavalier microphones)
• Mic Input: Mic Input Gain: Low, Mid, High
• Headphones: 1/8'' (3.5 mm) stereo mini jack (dual mono operation)
• USB Connector: Micro-B type (4 pin) Maximum Output: USB 2.0 high speed mass storage
• Power: 1x AAA battery (alkaline or NiMH) USB bus power
• Battery Operating Time: Alkaline Battery (EVOLTA): About 10 hours
• RTC Battery: 1x lithium (soldered in)
• Dimensions (WxHxD): 2 x 2.2 x 1'' (52 x 55.6 x 24.4 mm)
• Weight: 2.2 oz (63 g) with batteries, 1.8 oz (51 g) without batteries