EBS - STANDARD - VALVEDRIVE PREAMPLI (Préampli à lampe DI classe)

L'EBS ValveDrive DI se présente comme une pédale d'overdrive analogique pour basse électrique mais aussi comme comme un préamplificateur et boîtier DI grâce à la sortie directe symétrique. Le circuit de tubes analogiques convainc par sa variété tonale entre l'overdrive vintage chaud et la distorsion brute pour les inserts métalliques modernes. La commande de tonalité classique à 3 bandes vous permet d'ajuster le son des basses avec précision, tandis que le commutateur au pied vintage vous permet de changer l'harmonisation.

Très polyvalente, elle est capable de délivrer un son chaud et dynamique né de la compression musicale caractéristique des amplis à lampes. Pousser le volume de la pédale en conservant un niveau de gain faible réchauffera le son de n'importe quel ampli à transistor, tandis qu'un niveau de gain plus élevé offrira une overdrive ou une distorsion très chaude. True bypass, cette pédale présente une connectivité étendue grâce à la sortie XLR DI, permettant de connecter la pédale directement dans une table de mixage.

Caractéristiques :

• Préampli/DI à lampe pour basse
• Distorsion high gain
• Modes : Moderne, Vintage
• Contrôles : Volume, Gain
• EQ passif : Bass, Middle, Treble
• Commutateurs : Mode, Bypass
• Jack in/out
• Sortie XLR symétrique avec simulation de HP
• Interrupteurs : Pad -10dB, interrupteur de masse
• Bloc d'alimentation inclus

EBS - STANDARD - VALVEDRIVE PREAMP (DI class A tube preamp)

The EBS ValveDrive DI is presented as an analog overdrive pedal for electric bass but also as a preamplifier and DI box thanks to the balanced direct output. The analog tube circuit convinces with its tonal variety between the warm vintage overdrive and the raw distortion for modern metal inserts. The classic 3-band tone control lets you fine-tune the bass sound, while the vintage foot switch lets you change the harmony.

Very versatile, it is capable of delivering a warm and dynamic sound born from the musical compression characteristic of tube amps. Pushing the volume of the pedal keeping a low gain level will warm the sound of any transistor amp, while a higher gain level will offer a very hot overdrive or distortion. True bypass, this pedal has extensive connectivity thanks to the XLR DI output, allowing you to connect the pedal directly to a mixer.

Features:

• Tube preamp / DI for bass
• High gain distortion
• Modes: Modern, Vintage
• Controls: Volume, Gain
• Passive EQ: Bass, Middle, Treble
• Switches: Mode, Bypass
• Jack in / out
• Balanced XLR output with speaker simulation
• Switches: Pad -10dB, ground switch
• Power supply included

EBS - STANDARD - VALVEDRIVE PREAMP (DI class A tube preamp)

The EBS ValveDrive DI is presented as an analog overdrive pedal for electric bass but also as a preamplifier and DI box thanks to the balanced direct output. The analog tube circuit convinces with its tonal variety between the warm vintage overdrive and the raw distortion for modern metal inserts. The classic 3-band tone control lets you fine-tune the bass sound, while the vintage foot switch lets you change the harmony.

Very versatile, it is capable of delivering a warm and dynamic sound born from the musical compression characteristic of tube amps. Pushing the volume of the pedal keeping a low gain level will warm the sound of any transistor amp, while a higher gain level will offer a very hot overdrive or distortion. True bypass, this pedal has extensive connectivity thanks to the XLR DI output, allowing you to connect the pedal directly to a mixer.

Features:

• Tube preamp / DI for bass
• High gain distortion
• Modes: Modern, Vintage
• Controls: Volume, Gain
• Passive EQ: Bass, Middle, Treble
• Switches: Mode, Bypass
• Jack in / out
• Balanced XLR output with speaker simulation
• Switches: Pad -10dB, ground switch
• Power supply included

EBS - STANDARD - VALVEDRIVE PREAMP (DI class A tube preamp)

The EBS ValveDrive DI is presented as an analog overdrive pedal for electric bass but also as a preamplifier and DI box thanks to the balanced direct output. The analog tube circuit convinces with its tonal variety between the warm vintage overdrive and the raw distortion for modern metal inserts. The classic 3-band tone control lets you fine-tune the bass sound, while the vintage foot switch lets you change the harmony.

Very versatile, it is capable of delivering a warm and dynamic sound born from the musical compression characteristic of tube amps. Pushing the volume of the pedal keeping a low gain level will warm the sound of any transistor amp, while a higher gain level will offer a very hot overdrive or distortion. True bypass, this pedal has extensive connectivity thanks to the XLR DI output, allowing you to connect the pedal directly to a mixer.

Features:

• Tube preamp / DI for bass
• High gain distortion
• Modes: Modern, Vintage
• Controls: Volume, Gain
• Passive EQ: Bass, Middle, Treble
• Switches: Mode, Bypass
• Jack in / out
• Balanced XLR output with speaker simulation
• Switches: Pad -10dB, ground switch
• Power supply included

EBS - STANDARD - VALVEDRIVE PREAMP (DI class A tube preamp)

The EBS ValveDrive DI is presented as an analog overdrive pedal for electric bass but also as a preamplifier and DI box thanks to the balanced direct output. The analog tube circuit convinces with its tonal variety between the warm vintage overdrive and the raw distortion for modern metal inserts. The classic 3-band tone control lets you fine-tune the bass sound, while the vintage foot switch lets you change the harmony.

Very versatile, it is capable of delivering a warm and dynamic sound born from the musical compression characteristic of tube amps. Pushing the volume of the pedal keeping a low gain level will warm the sound of any transistor amp, while a higher gain level will offer a very hot overdrive or distortion. True bypass, this pedal has extensive connectivity thanks to the XLR DI output, allowing you to connect the pedal directly to a mixer.

Features:

• Tube preamp / DI for bass
• High gain distortion
• Modes: Modern, Vintage
• Controls: Volume, Gain
• Passive EQ: Bass, Middle, Treble
• Switches: Mode, Bypass
• Jack in / out
• Balanced XLR output with speaker simulation
• Switches: Pad -10dB, ground switch
• Power supply included