| GENERAL | |
| Type: | Amateur HF transceiver |
| Frequency range: | 10-80 m in 7 bands 3.5-4.0 MHz 7.0-7.3 MHz 14.0-14.35 MHz 21.0-21.45 MHz 28.0-28.5 MHz 28.5-29.1 MHz 29.1-29.7 MHz + 10.0 MHz WWV receive only |
| Tuning steps: | Continuous |
| Frequency stability: | Within ±2 KHz during the first hour after 1 minute warmup. Within 100 Hz during any 30 minute period thereafter. |
| Mode: | SSB / CW |
| Channels / memory management: | 4 regular XTAL controlled |
| Repeater shift / offset: | No |
| Power supply: | Mains: 120 / 220 VAC or 13.8 VDC (12-pin Jones connector) |
| Current drain / power consumption: | RX: 45 W @ mains - 5 A @ 13.8 VDC (Heaters on) TX: Max 280 W @ mains - 15 A @ 13.8 VDC |
| Antenna impedance / connector: | 50-75 ohm / SO-239 |
| Dimensions (W*H*D): | 335*150*335 mm (13.2*5.9*13.2") |
| Weight: | 17 Kg (37.4 lb) |
| Other features: | NB. VOX. 25 KHz XTAL calibrator. |
| RECEIVER SECTION | |||||
| Receiver system: | Double conversion superheterodyne 1st IF: 8.295-8.895 MHz 2nd IF: 3.395 MHz | ||||
| Sensitivity: | 0.25 uV (10 dB S+N/N) | ||||
| Selectivity: | SSB: 2.4 KHz (-6 dB), 4.4 KHz (-60 dB) CW: 500 Hz (-6 dB), 1.5 KHz (-60 dB), with optional CW filter | ||||
| Image rejection: | 50 dB | ||||
| AF output power / speaker: | 1 W at 10% distortion / 8 ohm | ||||
| External speaker connector: | |||||
| TRANSMITTER SECTION | |||||
| RF output power: |
| ||||
| Modulation system: | |||||
| Max FM deviation (Factory set): | No FM | ||||
| Spurious emissions: | Better than -40 dB | ||||
| Microphone impedance / connector: | 50 kOhm / 4-pin (metal locking ring connector) | ||||