This offer is for the Kenwood TS-50S HF 100W Transceiver.

SPECIFICATIONS

GENERAL
Type:Amateur HF transceiver
Frequency range:TX: 10-160 m + WARC
RX: 0.5-30 MHz
Tuning steps:AM/SSB/CW: 5-200 Hz
FM: 50 Hz to 2 KHz
Frequency stability:±10 ppm @ -10 to +50°C (14 to 122°F)
Mode:AM / FM / SSB / CW
Channels / memory management:100 regular
RAM storage with lithium battery backup
Repeater shift / offset:No dedicated. Use VFO A/B split instead
Power supply:13.8 VDC ±15%
Current drain / power consumption:RX: 1.45 A (No signal)
TX: Max 20.5 A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):179*60*233 mm (7.05*2.36*9.17")
Weight:2.9 Kg (6.4 lb)
Other features:CTCSS/PL encoder. 1750 Hz repeater tone. NB. AIP. IF shift.




RECEIVER SECTION
Receiver system:Double conversion superheterodyne (AM/SSB/CW)
1st IF: 73.045 MHz
2nd IF: 10.695 MHz
Triple conversion superheterodyne (FM)
1st IF: 73.045 MHz
2nd IF: 10.695 MHz
3rd IF: 455 KHz
Sensitivity:AM (10 dB S+N/N)
0.5-1.5 MHz: 2.5 uV
1.5-1.7 MHz: 3.5 uV
1.7-30 MHz: 2.5 uV
FM (12 dB SINAD)
28-30 MHz: 0.5 uV
SSB/CW (10 dB S+N/N)
0.5-1.5 MHz: 0.25 uV
1.5-1.7 MHz: 0.35 uV
1.7-30 MHz: 0.25 uV
Selectivity:AM: 5 KHz (-6 dB), 40 KHz (-60 dB)
FM: 12 KHz (-6 dB), 25 KHz (-60 dB)
SSB/CW: 2.2 KHz (-6 dB), 4.8 KHz (-60 dB)
Image rejection:70 dB
AF output power / speaker:2 W at 5% distortion / 8 ohm
External speaker connector:3.5 mm mono, 8-16 ohm




TRANSMITTER SECTION
RF output power:

MaxMidMin
AM:25 W17 W5.5 W
FM:100 W50 W10 W
SSB (PEP):100 W50 W10 W
CW:100 W50 W10 W
Modulation system:> AM: Low-level
FM: Variable reactance
SSB: Balanced
Max FM deviation (Factory set):±5 KHz
Spurious emissions:Better than -50 dB
Microphone impedance / connector:600 ohm / 8-pin (Metal locking ring connector)

The radio doesn't work, LCD doesn't show the frequency, some buttons don't work, receiver makes noise. 

This transceiver is sold for repair or parts. There are no accessories. Due to its age, this pre-owned item has a few scratches and scuff marks. Please see the images.

No returns will be accepted. Before placing an order, please contact us with any queries you may have.
<