High Low Voltage Clamp Current Meter Digital AC Leakage Current Tester 0mA-600A
Note: Battery not Included During The Shipping !!!
Introduction:
1. ETCR9100 Series H/L Voltage CLAMP has broken through the traditional structure, which is specially well-designed for measuring high voltage current, adopting the latest CT technology and integrated mask digital technology, formed by composition of a special use clamp leaker with a high-voltage insulation rod, as to ETCR9100B type --- wireless transmission of test data, it is equipped with wireless receivers, which can receive measured data within 30 meters line. If not using an insulation rod, it can be also used as a high precision low-voltage clamp leaker, or an alternating current meter, which can accurately measure 0.01mA of current or leakage current.
2. ETCR9100 Series H/L Voltage Clamp Leaker has an innovative integrated design between transducer clamp and transducer domain, ensuring the high-precision, high-reliability, and high-stability on constant test perennially.
3. ETCR9100 Series H/L Voltage Clamp Leaker is connected with insulation rod, which can be used for measuring high voltage current that is below 69KV, on-line current measurement, also having peak maintenance, data preservation, data storage, wireless transmission and other functions, and its special Clamp Leaker can make it easier for clamping or evacuating the tested wire through pressing or pulling back the insulation rod, time-saving and fast, widely used in transformer substation, power plant, industrial and mining enterprises as well as the inspection station and electrician maintenance departments for electrical current detection and field electrical operations.
4. It can also replace the H/L voltage transforming ratio tester, that is, to detect the high and low current for primary circuit and secondary circuit separately, and then calculate to conclude the change of high and low pressure. The insulation rod is light and convenient, with the advantages of anti-moisture, high temperature resistance, anti-impact, bending resistance, high insulation, flexibility and other characteristics.
Specifications:
Function | High voltage AC current measurement, low voltage AC current, current leakage measurement, online AC current measurement |
Power Supply | DC6V alkaline LR03×4) (not included) |
Test Mode | Clamp CT, integral approach |
Display Mode | 4 bit LCD display, with backlight function |
LCD Dimension | 47mm×28.5mm |
Meter Dimension | LWH: 68mm×245mm×40mm |
Clamp Dimension | 33mm |
Sampling Rate | 2 times/second |
Measurement Scope | 0.00mA~600A (50/60Hz automatic) |
Resolution | 0.01mA |
Shift | 0.00mA~600A automatic shift |
Accuracy (23℃±5℃, below 70%RH) | 0.00mA~100.0A: ±1%±5dgt |
100.0A~600.0A: ±2%±5dgt | |
Line Voltage | Below 60KV line test (with 5 insulation rods operation) |
Data Memory | 99 sets, memory process is shown by MEM , full storage is shown by blinking FULL |
PEAK value maintaining | Automatically maintain the high test value, in usual testing mode, press key HOLD till the lighting of PEAK, that is, start PEAK to maintain this function. |
Data Hold | In usual testing mode, press HOLD key to keep data, shown by “HOLD” |
Data Access | “MR” indication, can access to all data |
Overflow Display | Over-range overflow function: shown in “OL A” |
Automatic Shutdown | 15 minutes after boot |
Battery Voltage | When battery voltage is lower than 4.8V, battery voltage is shown in low symbol to remind battery replacement |
Meter Weight | Detector: 335g (with battery), the total mass of meter: 2.5kg (including insulation rod and battery) |
Working Temperature and Humidity | -25℃~40℃; below 80%Rh |
Storage Temperature and Humidity | -10℃~60℃; below 70%Rh |
Insulation Rod Dimension | φ32mm, 1m/piece (5pieces) |
Insulation Strength | AC 100kV/rms (between the 5th insulation rod and high voltage current clamp core) |
Structure | Anti-drip type Ⅱ |
Safety Provisions | IEC1010-1, IEC1010-2-032, Pollution Class 2, CAT Ⅲ(600V), IEC61326(EMC standard) |
Accessories | Clamp Meter : 1 piece; meter box: 1 piece; insulation rod (1m): 5 pieces; |