The Dynacord L3600FD is a live performance DSP amplifier with 2x1800W.
Features
- Live performance DSP amplifier
- Fully integrated professional speaker processing with FIR Drive technology
- Market leading acoustic performance and rock solid reliability
- True 2 ohm stability
- Intuitive system control software, makes setup and control easy
Specifications
- Load Impedance: 2 Ohm 2.7 Ohm 4 Ohm 8 Ohm
- Maximum Output Power, Single Channel: 2 Ohm: 3200W;2.7 Ohm: 2700W; 4 Ohm: 1800W; 8 Ohm: 950W
- Maximum Output Power, Dual Channel: 2 Ohm: 3000W; 2.7Ohm: 2500W; 4 Ohm: 1700W; 8 Ohm: 900W
- Maximum Output Power, Bridged: 4 Ohm: 6000W; 8 Ohm:3400W
- Maximum RMS Voltage Swing, THD = 1%, 1kHz: 90.6V
- Voltage Gain ref.1kHz: 32.0dB
- IMD-SMPTE, 60 Hz, 7 kHz:< 0.1%
- DIM 30:< 0.05% (3.15 kHz, 15 kHz)
- Maximum Input Level: +21 dBu
- Crosstalk:< -80 dB (ref. 1 kHz, at 100 W/4 Ohm)
- Frequency Response: 10 Hz to 21 kHz (+/-1 dB)
- Input Impedance, active balanced: 20 kOhm
- Signal-to-Noise Ratio (A-weighted): >109 dB
- Output Noise , A-weighted:< -68 dBu
- Output Stage Topology: Class H
- Power Requirement: 240 V, 230 V, 120 V or 100 V; 50Hz to 60 Hz (factory configured)
- Power Consumption: 850 W (? Maximum Output Power @ 4Ohm)
- Protection: Audio limiters, high temperature, DC, HF;Back-EMF, Peak current limiters, Inrush current; limiters, Turn on delay
- Cooling: Front-to-rear, 3-stage-fans
- Safety Class: I
- Available Color: Black
- Height: 3.46" (88 mm)
- Width: 19.02" (483 mm)
- Depth: 18.2" (462.4 mm)
- Weight Net: 40.12 lbs (18.2 kg)
- Signal Processing: FIR Filters, Audio Limiters;Output delay per channel; 31 band GEQ per channel; PEQ per channel; Load impedance
- Mains Fuse: 240 V/230 V: T15AH; 120 V/100 V: T30AH
- Operating Temperature Range: +5°C to +40°C (40°F to+105°F)
- Total Harmonic Distortion:< 0.05% (1200 W/4 Ohm MBW = 80 kHz, 1kHz)