Product: Aluminum Welding Rods
Material: Aluminum
Melting point: about 450-480℃
Optional Diameter:1.6mm/0.06inches, 2mm/0.08inches
Length: 25cm, 33cm
Applications: For Aluminum material

Features:

1. Widely use--Suitable for welding or surfacing welding alloy with high strength, good forgeability & good corrosion resistance.

2. Good quality material--Made of aluminum material, nontoxic, odourless and durable material.

3. No solder powder needed-- there is no need to use other flux powder with aluminum alloy as the welding core and coating as the salt base.

4. Application--Include welding filler wire and spray and flame metalizing wire. It also used for argon arc welding and filling material for pure aluminum, connection with aluminium bus and guide rod of electrolytic aluminium plant and electric power, chemistry, food and so on.

5. Perfect welding effect-- Designed with full & smooth welding effect because the item comes with internal powder, great weldability and corrosion resistance, high thermal conductivity, high electric conductivity and excellent processing performance. 

 

Usage:

1. Clean and polish the physical surface.

2. Heat the surface of the metal material until the temperature of wire is up to the working temperature 380℃ to 400℃.

3. The aluminum base metal is heated to the appropriate working temperature when repairing thin aluminum, and then use the wire  friction and melt to form a weld.

4. Use propane gas to weld small object and use industrial gas or induction heating device to heat , you should cool it naturally after welding.

 

Please Note:

1. The thicker the piece, the more difficult to heat it up, so it is important to use a reasonable heat source.

2. As long as the surface temperature of the base metal reaches the operating temperature of welding wire, you can start to weld.

3. When using Oxyacetylene welding, the neutral flame welding should be used, but please do not  burn the wire directly.

4. Applicable Heat Source: Such as propane, oxyacetylene and so on.

5. Storage: please store in a dry and ventilated place.

6. The surface of the base metal must be clean. 

7. The base metal temperature should reach to 400 degrees, including the process of welding the base metal temperature should be maintained at 400℃, and the temperature can be high or low.

8. Due to the light and screen setting difference, the item's real color may be slight difference. 

9. Please allow slight dimension difference due to different manual measurement.

10. Professional use is highly recommended.