This photograph is of high quality. It shows the first ever produced AC Cobra racecar, the nr. 98xp AC Cobra with rider Bill Krause, as seen in action during the 1962 Riverside 3 Hours roadrace (a.k.a. the 5TH annual Grand Prix for Sports Cars) which was ridden on October 13, 1962. Krause was leading the race when his left rear halfshaft broke, which forced him to retire.

It was the DEBUT RACE of the new AC Cobra - Shelby Cobra!!

Krause was entered for the race by Shelby American Corporation. The race was won by Doug Hooper in a Corvette Stingray.

A very rare and very historic photograph to own, it would look wonderfully framed and it would make a magnificent and very special gift!

We also have a few photographs available of different Cobra final assembly stages, all taken in Shelby’s Carter Street facility in Venice, CA. in 1964. Also racing images of various events. Even some of the AC Daytona Cobra Coupe a.k.a. AC Daytona Coupe (of 1963).

The AC Cobra, also known as the Shelby Cobra , is an Anglo-American sports car that was produced during the 1960s. Like many British specialist manufacturers, AC Cars had been using the smooth, refined Bristol straight-6 engine in its small-volume production, including its AC Ace 2-seater roadster. This had a hand-built body with a steel tube frame, and aluminium body panels that were made using English wheeling machines. The engine was a pre-World War II design of BMW which by the 1960s was considered dated. Bristol decided in 1961 to cease production of its engine and instead to use Chrysler 331 cid (5.4 L) V8 engines. Although untrue, it is commonly believed that AC was left without a future source of power and that American ex-racing driver Carroll Shelby saved the company from bankruptcy. AC started using the 2.6 litre Ford Zephyr engine in its cars. In September 1961, Shelby airmailed AC a letter asking them if they would build him a car modified to accept a V8 engine. AC agreed, provided a suitable engine could be found. He first went to Chevrolet to see if they would provide him with engines, but not wanting to add competition to the Corvette they said no. Ford however, wanted a car that could compete with the Corvette and they happened to have a brand new thin-wall small-block engine which could be used in this endeavour. It was Ford's 260 in³ HiPo (4.2 L) engine - a new lightweight, thin-wall cast small-block V8 tuned for high performance. In January 1962 mechanics at AC Cars in Thames Ditton, Surrey fitted the prototype chassis CSX0001 with a 221ci Ford V8. After testing and modification, the engine and transmission were removed and the chassis was air-freighted to Shelby in Los Angeles on 2 February 1962. His team fitted it with an engine and transmission in less than eight hours at Dean Moon's shop in Santa Fe Springs, California, and began road-testing. Production proved to be easy, since AC had already made most of the modifications needed for the small-block V8 when they installed the 2.6 litre Ford Zephyr engine, including the extensive rework of the AC Ace's front end. The most important modification was the fitting of a stronger rear differential to handle the increased engine power. A Salisbury 4HU unit with inboard disk brakes to reduce unsprung weight was chosen instead of the old ENV unit. It was the same unit used on the Jaguar E-Type. On the production version, the inboard brakes were moved outboard to reduce cost. The only modification of the front end of the first Cobra from that of the AC Ace 2.6 was the steering box, which had to be moved outward to clear the wider V8 motor. The first 75 Cobra Mark I (including the prototype) were fitted with the 260 engine (4.2 L). The remaining 51 Mark I model were fitted with a larger version of the Windsor Ford engine, the 289 in³ (4.7 L) V8. In late 1962 Alan Turner, AC's chief engineer completed a major design change of the car's front end and was able to fit it with rack and pinion steering while still using transverse leaf spring suspension. The new car entered production in early 1963 and was designated Mark II. The steering rack was borrowed from the MGB while the new steering column came from the VW Beetle. About 528 Mark II Cobras were produced to the summer of 1965 (the last US-bound Mark II was produced in November 1964). By 1963 the leaf-spring Cobra was losing its supremacy in racing. Shelby tried fitting a larger Ford FE engine of 390 in³. Ken Miles drove and raced the FE-powered Mark II and pronounced the car was virtually undrivable, naming it "The Turd." A new chassis was developed and designated Mark III. The new car was designed in cooperation with Ford in Detroit. A new chassis was built using 4" main chassis tubes (up from 3") and coil spring suspension all around. The new car also had wide fenders and a larger radiator opening. It was powered by the "side oiler" Ford 427 engine (7.0 L) rated at 425 bhp (317 kW), which provided a top speed of 164 mph (262 km/h) in the standard model and 485 bhp (362 kW) with a top speed of 185 mph (298 km/h) in the competition model. Cobra Mark III production began on 1 January 1965; two prototypes had been sent to the United States in October 1964. Cars were sent to the US as unpainted rolling chassis, and they were finished in Shelby's workshop. Although an impressive automobile, the car was a financial failure and did not sell well. In fact to save cost, most AC Cobra 427s were actually fitted with Ford's 428 in³ (7.0 L) engine, a long stroke, smaller bore, lower cost engine, intended for road use rather than racing. It seems that a total of 300 Mark III cars were sent to Shelby in the USA during the years 1965 and 1966, including the competition version. 27 small block narrow fender version which were referred to as the AC 289 were sold in Europe. Unfortunately, The MK III missed homologation for the 1965 racing season and was not raced by the Shelby team. However, it was raced successfully by many privateers and went on to win races all the way into the 70s. Interestingly, 31 unsold competition cars were detuned and made road worthy and called S/C for semi-competition. Today, these are the rarest and the most valuable models and can sell for in excess of 1.5 million dollars.

The Shelby Cobra – AC Cobra cars had an extensive racing career. Shelby wanted it to be a "Corvette-Beater" and at nearly 500 lb (227 kg) less than the Chevrolet Corvette, the lightweight car did just that. The Cobra was perhaps too successful as a performance car and reputedly contributed to the implementation of national speed limits in the United Kingdom. An AC Cobra Coupe was calculated to have done 186 mph (299 km/h) on the M1 motorway in 1964, driven by Jack Sears and Peter Bolton during shakedown tests prior to that year's Le Mans 24h race. However, government officials have cited the increasing accident death rate in the early 1960s as the principal motivation, with the exploits of the AC Cars team merely highlighting the risk. Although successful in racing, the AC Cobra was a financial failure, which led Ford and Carroll Shelby to discontinue importing cars from England in 1967. AC Cars kept producing the coil spring AC Roadster with narrow fenders, a small block Ford 289 and called the car the AC 289. It was built and sold in Europe until late 1969. This car with modifications would appear again in 1982 as the Autokraft MkIV, basically an AC MkIII car with a 5.0L Ford V8 and Borg Warner T5 Transmission. AC also produced the AC Frua until 1973. The AC Frua was built on a stretched Cobra 427 MK III coil spring chassis using a very angular handsome steel body designed and built by Pietro Frua. With the demise of the Frua, AC went on building lesser cars and eventually fell into bankruptcy in the late 1970s'. The company's tooling and eventually the right to use the name, were licensed by Autocraft, a Cobra parts reseller and replica car manufacturer owned by Brian A. Angliss. Autocraft was manufacturing an AC 289 continuation car called the Mark IV. Shortly thereafter, Carroll Shelby filed suit against AC Cars and Brian A. Angliss, in U.S. District Court in Los Angeles. The ensuing settlement resulted in Shelby and AC Cars/Angliss releasing a joint press release whereby AC/Angliss acknowledged that Carroll Shelby was (and is) the manufacturer of record of all the 1960s AC Cobra automobiles in the United States and that Shelby himself is the sole person allowed to call his car a Cobra. Carroll Shelby's company Shelby Automobiles, Inc. continues to manufacture the Shelby Cobra FIA 289 and 427 S/C vehicles in various forms at its facility in Las Vegas, Nevada. These cars retain the general style and appearance of their original 1960s ancestors, but are fitted with modern amenities. In an effort to improve top speed along the legendary Mulsanne Straight at the 24 Hours of Le Mans race, a number of enclosed, coupe variations were constructed using the leafspring chassis and running gear of the AC/Shelby Cobra Mark II. The most famous and numerous of these were the official works Shelby Daytona Cobra Coupes. Six were constructed in total, each being subtly different from the rest. AC also produced a Le Mans coupe. The car was a one-off and was nearly destroyed after a high-speed tire blow-out at the 1964 Le Mans race. The car was completely rebuilt and as of now is in private ownership in England. The third significant Cobra-based coupe was the Willment Cobra Coupe built by the JWA racing team. A road-going Shelby Daytona Cobra replica is being manufactured by Superformance and Factory Five Racing, a well known kit car company. These cars use Pete Brock's bodywork designs, scaled up to increase room inside, and a newly designed spaceframe chassis, they are powered by Roush-built Ford Windsor (Sportsman) engines. The Superformance Shelby Daytona Coupe is the only modern-day vehicle recognized by Shelby as a successor to the original Coupes. From the late 1980s onwards, Carroll Shelby and associated companies have built what are known in the hobby as "Continuation Cars", Shelby authorized continuations of the original AC bodied Shelby Cobra series. Initially the car everyone wanted in a Continuation was a 427 S/C model which was represented in the CSX4000 series. This was meant to continue where the last 427 S/C production left off, at approximately serial number CSX3560 in the 1960s. The initial CSX4000 series cars were completed from new old stock as well as newly manufactured parts. Gradually as the vintage parts supply ran low, newly constructed frames and body panels were obtained from a variety of suppliers. The production of chassis numbers CSX4001 to CSX4999 took roughly 20 years and many different business relationships to complete. All models of Cobra produced are available now as continuations. In 2009, CSX4999 was produced, concluding the 4000 series. Production has continued with the CSX6000 serial numbers, featuring "coil over" suspension. The 289 FIA "leaf spring" race version of the car is reproduced as CSX7000, and the original "slab side" leaf spring street car is the CSX8000 series. To date most continuations are produced in fiberglass, with some ordering cars with aluminum or carbon fibre bodywork. In 2004, at the North American International Auto Show in Detroit, Ford unveiled a concept for a modernized Shelby Cobra. The Ford Shelby Cobra Concept was a continuation of Ford's effort to bring back the retro sports cars that had been successful in the 1960s, including the Ford GT40 and the fifth generation Ford Mustang. Shelby Motors built twenty two 427 competition roadsters. In 1965, one was selected and converted into a special model called the 427 "Cobra to End All Cobras." The first one of these (number CSX3015) was originally part of a European promotional tour before its conversion. This conversion called for making the original racing model street legal with mufflers, a windshield and bumpers amongst other modifications. But some things were not modified, including the racing rear end, brakes and headers. The most notable modification is the addition of Twin Paxton Superchargers. This gave the car a claimed 462 brake horsepower (bhp) and 800 Ft pounds of torque at 3000 rpm. Officially rated at 0-to-60 at 4.5 seconds, legend and lore have it as doing that in a little over 3 seconds as one must lay off the throttle heavily just to get traction off the line. Another non-competition 427 roadster, CSX3303, was converted and given to Shelby's close friend, Bill Cosby. Cosby attempted to drive the super-fast Cobra, but had issues with keeping it under control. This was humorously documented in Cosby's album titled Bill Cosby, 200 M.P.H.. Cosby gave the car back to Shelby, who then shipped it out to one of their dealers in San Francisco, S&C Ford on Van Ness Avenue. S&C Ford then sold it to customer Tony Maxey. Maxey, suffering the same issues as Cosby did with the car, lost control and drove it off of a cliff, landing in the Pacific Ocean waters. It is to be noted that Maxey's accident was largely speculated as suicide. It was eventually recovered and the wreckage was bought by Brian Angliss of AC/Autokraft. Since CSX3303 was so badly damaged in the Maxey accident, it is doubtful that much of the original car will surface in the restored version. Shelby's original model, CSX3015, was kept by Carroll Shelby himself over the years as a personal car, sometimes entering it into local races like the Turismos Visitadores Cannonball-Run race in Nevada, where he was "waking [up] whole towns, blowing out windows, throwing belts and catching fire a couple of times, but finishing."

The photograph that the winner of this auction will receive is a very nice and very rare non period photo that reflects a wonderful era of Shelby Cobra , AC Cobra and Shelby ‘s automotive history in a wonderful way. This is your rare chance to own this photo, it has a nice large format of ca. 8" x 10" (ca. 20 x 30 cm).  It makes it perfectly suitable for framing.

Contact us for more AC , Shelby and other automotive photos!